Products
|
Model
|
Area
|
Zaxis
|
Wattages
|
Speed
| |
|
|
|
|
|
|
Sorry, you have entered an invalid value !
|
|
|
|
|
|
|
Sorry, you have entered an invalid value !
|
|
Window Cylinders-Each, Top Door (Glass Window), Spirit Si, SLS, Mercury, X252, Shock Lift (15" L, 8Kg)
Window Cylinders-Each, Top Door (Glass Window), Spirit Si, SLS, Mercury, X252, Shock Lift (15" L, 8Kg), After 2017 Built
More Info
|
|
|
|
|
Sorry, you have entered an invalid value !
|
|
Window Cylinders-Each, Top Door (PC\Acrylic Window), Explorer, Mercury, Spirit Si, SLS, SGE, Shock Lift (11" L, 5Kg)
Window Cylinders-Each, Top Door (PC\Acrylic Window), Explorer, Mercury, Spirit Si, SLS, SGE, Shock Lift (11" L, 5Kg)
More Info
|
|
|
|
|
Sorry, you have entered an invalid value !
|
|
Accumulator XL 5 Gallon – Per Filter Cyclone – 10529
Pre filter cyclone for dust collectors
Acts as a dust separator and pre filter cyclone that pushes debris and dust to the bottom container
Features:
- Easily Integrates Into Any Dust Collection System
- 5 Gallon Removable Debris Capture Bucket
- Highly Durable Molded Resin Design
- Scientifically Tested and Proven to Separate Dust
- Up To 97% Cyclonic Separation Rate of Particles Down to .3 Microns
- 95% Effective at Precious Metal Reclamation
- Inlet/Outlet Ports – OD: 4″- ID: 3.75″
More Info
|
|
|
|
|
Sorry, you have entered an invalid value !
|
|
Vacuum, Chip Extraction Sys. UltraQuiet, 1/2hp w/accumulator for Roland Engravers
Vacuum, Chip Extraction Sys. UltraQuiet, 1/2hp w/accumulator
Key Features
- This chip removal system is quiet and efficient to use in any shop.
- The vacuum not only keeps your works space clear of debris, but it also filters 99.99% of dust out of the air!
- The systems are also self-contained so it can be used to reclaim precious metals.
- The vacuum hose supplied slips onto the vacuum connection on top of the unit and the other end connects to the collection device desired.
- The ideal location for the US-CHIPSYS-C is under the bench where the user works.
US-CHIPSYS-C Specifications
- Usage: Single station use for collecting dust at 1.5” diameter workstation
- Speeds: Single Speed
- Size: 14.Lx10.Wx12.H
- Power Requirement: 115 VAC 5A
- Overload Protection: Resettable circuit breaker included.
- Sound rating: 53db on High
- Dust Collection: Collects 99.99% of all dust (filter rated at 95% @ 1 micron)
- Motor Rating: High-Performance ½ Horsepower Motor
More Info
|
|
|
|
|
Sorry, you have entered an invalid value !
|
|
|
|
|
|
|
Sorry, you have entered an invalid value !
|
|
Honeycomb \ Vector Cutting Table for Mercury, X252 Aluminum Grid Plate Style
Honeycomb \ Vector Cutting Table 1/2" Squares, Mercury, X252 Aluminum Grid Plate Style
The aluminum grid cutting table is an ideal pal for laser cutting. It lifts the work piece off the work table from hitting by laser reflection while supports it with reinforced aluminum grid design. The dust and vapor created during laser cutting are then taken away effectively through the grid by down vacuum exhaust (suggested using SmartBOX™ together). Rather than handling rigid materials, aluminum grid cutting table also helps to fix flexible materials with the aid of down vacuum SmartBOX™ to keep constant focus distance and consistent cutting result. A clean and better cutting quality is achieved from this technique.
More Info
|
|
|
|
|
Sorry, you have entered an invalid value !
|
|
Honeycomb \ Vector Cutting Table for S400 Aluminum Grid Plate Style
Honeycomb \ Vector Cutting Table for S400 Aluminum Grid Plate Style
The aluminum grid cutting table is an ideal pal for laser cutting. It lifts the work piece off the work table from hitting by laser reflection while supports it with reinforced aluminum grid design. The dust and vapor created during laser cutting are then taken away effectively through the grid by down vacuum exhaust (suggested using SmartBOX™ together). Rather than handling rigid materials, aluminum grid cutting table also helps to fix flexible materials with the aid of down vacuum SmartBOX™ to keep constant focus distance and consistent cutting result. A clean and better cutting quality is achieved from this technique.
More Info
|
|
|
|
|
Sorry, you have entered an invalid value !
|
|
Honeycomb \ Vector Cutting Table for T500-GAIA
Honeycomb \ Vector Cutting Table for T500-GAIA
The aluminum grid cutting table is an ideal pal for laser cutting. It lifts the work piece off the work table from hitting by laser reflection while supports it with reinforced aluminum grid design. The dust and vapor created during laser cutting are then taken away effectively through the grid by down vacuum exhaust (suggested using SmartBOX™ together). Rather than handling rigid materials, aluminum grid cutting table also helps to fix flexible materials with the aid of down vacuum SmartBOX™ to keep constant focus distance and consistent cutting result. A clean and better cutting quality is achieved from this technique.
More Info
|
|
|
|
|
Sorry, you have entered an invalid value !
|
|
Honeycomb \ Vector Cutting Table 1/2" Squares, Spirit GX\GLS\GLS-HYB, Aluminum Grid Plate Style
Honeycomb \ Vector Cutting Table 1/2" Squares, Spirit GX\GLS\GLS-HYB, Aluminum Grid Plate Style
The aluminum grid cutting table is an ideal pal for laser cutting. It lifts the workpiece off the work table from hitting by laser reflection while supports it with reinforced aluminum grid design. The dust and vapor created during laser cutting are then taken away effectively through the grid by down vacuum exhaust (suggested using SmartBOX™ together). Rather than handling rigid materials, aluminum grid cutting table also helps to fix flexible materials with the aid of down vacuum SmartBOX™ to keep constant focus distance and consistent cutting result. A clean and better cutting quality is achieved from this technique.
More Info
|
|
|
|
|
Sorry, you have entered an invalid value !
|
|
Honeycomb \ Vector Cutting Table for Spirit /Spirit LS, S290 Aluminum Grid Plate Style
Honeycomb \ Vector Cutting Table 1/2" Squares, Spirit Si/Spirit LS, S290 Aluminum Grid Plate Style
The aluminum grid cutting table is an ideal pal for laser cutting. It lifts the workpiece off the work table from hitting by laser reflection while supports it with reinforced aluminum grid design. The dust and vapor created during laser cutting are then taken away effectively through the grid by down vacuum exhaust (suggested using SmartBOX™ together). Rather than handling rigid materials, aluminum grid cutting table also helps to fix flexible materials with the aid of down vacuum SmartBOX™ to keep constant focus distance and consistent cutting result. A clean and better cutting quality is achieved from this technique.
More Info
|
|
|
|
|
Sorry, you have entered an invalid value !
|
|
|
|
|
|
|
Sorry, you have entered an invalid value !
|
|
Cone Set, Rotary Cone Adaptors (5) for GCC Laser
Cone Set, Rotary Adaptors (5) for GCC Laser, Includes Rotary Cones:
1-Rotary Flange Adapter 6mm, Metal $150
1-Rotary Cone 2.18od x 1.87od, Blue $55
1-Rotary Cone 2.50od x 2.12od, Red $55
1-Rotary Cone 2.95od x 2.44od, Maroon $55
1-Rotary Cone 3.50od x 3.00od,White $55
1-Rotary Cone 4.00od x 3.25od, Orange $55
More Info
|
|
|
|
|
Sorry, you have entered an invalid value !
|
|
|
|
|
|
|
Sorry, you have entered an invalid value !
|
|
|
|
|
|
|
Sorry, you have entered an invalid value !
|
|
Rotary Attachment for GCC C180-I & II Laser
Rotary Attachment for GCC C180-I & II Laser
Engraving on cylindrical or spherical objects has always been considered to be complicated and problematic. These objects are difficult to pinpoint, and cannot rotate freely when engraving takes place, given that engraving is only possible in small or restricted areas. However, now through LaserPro's Rotary Attachment device, engraving on cylindrical and sphere-shaped objects will become simple and effortless.
|
LaserPro Application Lab had previously introduced Rotary Attachment in the showcase titled Sip A Drink From Your Own Personalized Glass Cup, but there are still users who are not familiar with the Rotary Attachment's capabilities. Therefore we will attempt to simplify the setup process and clarify positioning modes, advocating to ease the initialization phase for our users. |
Moreover, we will exhibit steps to apply the Position Mode and demonstrate how to utilize its Driver functions to efficiently complete all settings. Users are no longer required to spend unwarranted time so as to modify required and precise positioning; they will be able to engrave on demand. We believe that all users will love this new and thoughtful addition. |
|
Click Here to see C180 Rotary Attachment Setup.
Click Here to see Tennis Ball rotary laser engraved.
|
C180II’s rotary attachment.
Work Piece Limitations
|
|
Maximum Length
|
|
250mm (9.8 inches)
|
|
Maximum Loading Weight
|
|
3 kg (6.6 lbs.)
|
|
Minimum Diameter (Small Conical Fixture)
|
|
12 mm (0.5" inches)
|
|
Maximum Diameter (Small Conical Fixture)
|
|
50 mm (1.9" inches)
|
|
Minimum Diameter (Large Conical Fixture)
|
|
90 mm (3.5" inches)
|
|
Maximum Diameter (Large Conical Fixture)
|
|
120 mm (4.7" inches)
|
|
Maximum Outer Diameter
|
|
176 mm (6.9 inches)
|
|
Exchange the Conical Fixtures:
Depending on the shape of the workpiece, you can exchange different designs of front and back fixtures to fit the materials as below illustration.
More Info
|
|
|
|
|
Sorry, you have entered an invalid value !
|
|
Rotary Attachment-Chuck for S400, Spirit, SLS, SGLS, SGLS-HYB, S290 Laser System
Rotary Attachment-Chuck for S400, Spirit, SLS, SGLS, SGLS-HYB, S290 Laser System
Features: (1) Tilt up to 45 deg. to mark the inner side of the ring (2) max. diameter: 86mm & max. length: 400mm without tilt
Specification information:
Maximum Length: 1000 mm (39.2")
Maximum Loading Weight: 4 kg (8.8 lbs.)
Minimum Diameter: 0.5 mm (0.02 inches)
Maximum Diameter: 120 mm (4.7 inches)
Cutting & Engraving Video
S290 Rotary Attachment Video
More Info
|
|
|
|
|
Sorry, you have entered an invalid value !
|
|
|
|
|
|
|
Sorry, you have entered an invalid value !
|
|
|
|
|
|
|
Sorry, you have entered an invalid value !
|
|
|
|
|
|
|
Sorry, you have entered an invalid value !
|
|
|
|
|
|
|
Sorry, you have entered an invalid value !
|
|
|
|
|
|
|
Sorry, you have entered an invalid value !
|
|
Rotary Attachment for X500-III Laser
Rotary Attachment For GCC: X500-III
Max Length: 1020mm (40inch)
Max Loading Weight: 4 kg (8.8 lbs.)
Min Diameter: 7 mm (0.27")
Max Diameter: 120 mm (4.33")
Allows the laser system to perform at another level! By using the rotary attachment, engraving on cylindrical or round objects is now possible. This option uses a fourth axis to rotate your object 360° to allow engraving on cups, wine glasses or even a baseball with two types of conical fixture available. The minimum inner/maximum outer diameter and length of the working object is 7 mm / 120 mm and 1020 mm respectively. Its maximum weight should not exceed 4kgs.
HTS#: 8466.93.5385
More Info
|
|
|
|
|
Sorry, you have entered an invalid value !
|
|
|
|
|
|
|
Sorry, you have entered an invalid value !
|
|
|
|
|
|
|
Sorry, you have entered an invalid value !
|
|
Power Supply, Laser Tube PS, 48vdc (12w & C30, Mercury (C30), Venus (48-series 12w & C30), Gaia, X500, _Other Models w/DEOS Tubes)
Power Supply, Laser Tube PS, 48vdc (ASNER Series-ALS800-48C21, 12w & C30, Mercury (C30), Venus (48-series 12w & C30), Gaia, X500, Other Models w/DEOS Tubes, 110V-600W/220V-800W)
More Info
|
|
|
|
|
Sorry, you have entered an invalid value !
|
|
|
|
|
|
|
Sorry, you have entered an invalid value !
|
|
|
|
|
|
|
Sorry, you have entered an invalid value !
|
|
|
|
|
|
|
Sorry, you have entered an invalid value !
|