GCC Spirit LS Parts

Adapter, for Synrad Laser Ti Series, Laser Housing D-SUB Male 15pin to RJ45 Connector 

Air Nozzle, SmartAir Fine Nozzle, f:2.5mm, Rev. 2, After SN: I50790, For: C180-II, SLS, SGX, SGLS, S290, S290LS (Thin\Fabric Cutting, NOT for 4" Lens)

Air Nozzle, SmartAir Standard Deep Cutting, f:5mm, Rev. 1, Before SN: I50790: Spirit Si/Spirit LS/ GE/GX/Spirit GLS/C180/C180 II/S290/ S290LS
Dim's: W:1.14", L:1", OD:0.315"

For: C180-II & Spirit Model (Top X-axis Rail, Y-axis Inside Rail, BK01845A)

Bearing, X-axis Right Side Rail For: Spirit Si, SGE, SGLS (BR01802A / 687ZZ)

X-axis Open Kevlar Belt (FHT-2*T897*W15)

For: GCC Spirit LS, belt only

Belt, X & Y Axis Motor Belt, Short-Closed, For Spirit LS, SGLS, SGLS-HYB, X500-II (FHT-2*T90*W10)

Belt, Y-axis Carriage Belt, Long-Open, For: Spirit LS, After SN: K50114

Belt, Y-axis Carriage Belt, Long-Open, For: Spirit Si\SLS\S290\SGE, BL01802A (2GT-1224-W12), Before Serial #: K50114

GCC 290100500G Board, USB Storage Disk Board Assembly with firmware(red board) for Venus II, Spirit Series, Mercury III, X Series, T500, S400 for 5272V2/5272V3 MB

Bracket Base, Mirror #2, Spirit Models

Bracket, Mirror Prism Mounts Assy For: C180/X252/SI/GLS/SGE/SGX/SLS/X380/S290/Explorer (for ALL the optics, Mirror 1, 2, 3), Mercury 30/40-mirror 1 & all Mercury-red beam mirror
Replaces: 20200185G

Bypass Connector Plug for Pass-Through Door Switch Module For GCC 2019+ Models: Mercury III/Spirit/Spirit LS/GLS/GLS Hybrid/X252EX/X380RX/X500III/MG380Hybrid/S400

Cable, Auto Focus Cable Flat Ribbon, 8 Pin For: Spirit GLS\X380\S400 (59" Long, 1.0mm - 1500mm),  Cable Info: E357637, AWM20798

Cable, Auto Focus Cable, Braided 3S For  Spirit Si/LS/S290 (52" Long, before SN: K50114) HTS 8466.939585

Cable, Auto Focus Cable, Braided-3S, To AF Seat & PCB For Spirit Models (100mm,  4"  Long) HTS 8465.93.9585

Cable, Auto Focus Cable, Flat Ribbon, 8 Pin, For: Spirit SLS , 48"L. 120mm long- After SN: K50114) FAC8-1220(05/5/10/10)(2896)

Cable, Fan PCB DC output to 12V PCB cable 1700mm (0116-9091-173-1) Spirit GX

Cable, Rotary Connection Cable from Machine to Attachment PCB (155cm for Rotary Assy 29001051G and 290072190G)

Machine Model: Mercury/Spirits/S290 (Female)

(Connect from Main Board MCB-To-Rotary Attachment) 

Cable, X-Motor Flat Ribbon, 12 Pin (SLS, SGLS, Si, SGX, SGE, X380, S290, S400, H230, MG380HYB, 1/2"W x 33.75"L-850mm,  AWM 20624, E244054)

Cable, Fan PCB DC output to 12V PCB cable 1700mm (0116-9091-173-1) Spirit GX

Cable, Y-Axis Motor to PCB (X380, Spirit Models, SY003-631/0132-516-135)

For: GCC Models Spirit SLS\S290LS (Before Serial #: I50790)

Chain, X-Tube Chain Track for Spirit Si, SLS
Specs: 045.10.028-35L-045.10.12 total 37 links, MZ01819A

Cone Set, Rotary Adaptors (5) for GCC Laser, Includes Rotary Cones:
1-Rotary Flange Adapter 6mm, Metal $150
1-Rotary Cone 2.18od x 1.87od, Blue $55
1-Rotary Cone 2.50od x 2.12od, Red $55
1-Rotary Cone 2.95od x 2.44od, Maroon $55
1-Rotary Cone 3.50od x 3.00od,White $55
1-Rotary Cone 4.00od x 3.25od, Orange $55

Cone, Rotary Attachment Large Cone

Cone, Rotary Attachment Small Cone

Connector, Laser Housing D-SUB Male 15pin to BNC Connector  (SY003-340(LF)) - BNC Cable to T60, Gaia II, MIII, Si, SGE, SGX, SLS, SGLS

Control Panel, LCD Assy PCB for 5206e MCB (Spirits-All-Older, S290, C180-II, MIII, X252\X380\X500-II, Gaia)

Control Panel, LCD Assy PCB, for 5272 MCB w/o Sticker (C180II, Spirits, HYB)

* We require your machine serial # to confirm order
** 5272MCB = Green\Red or Blue\Red
*** * Replaced 290080120G

Cover, Dust Prevention For Bracket, Mirror #2 (Spirit Models)

Cover, LED's Fluorescent Plastic Cover for Lamps (All Mach.)

Cover, Top Lens Carriage Shingle (Black, 2 Mounting Holes)

Cover-Lid, Top Clear Acrylic Lid for Spirit LS, Mercury-III Laser (Acrylic ONLY- NO hinges)

228039950G Coverlid, Top Glass Window for Mercury III & Spirit LS. ROHS Std's

(Window Only - No hinges)

Exhaust Port Windpipe Stable Seat
4” with Round Border (Mercury I, II, III, X252, X380)

External Interface Control Board Assembly, Interface Board, I/O 12V/24V for: 
Spirit/Spirit LS/GLS/X252/X380/MG380Hybrid/ Mercury III/X500III/T500 with MCB # 23800315(02) mainboard & #5272 M/B
(List price $595, or with Mach. Purchase $445)

Fan, For Electronics Compartment, Spirit Models (3"x3"x1", DC12V)

Dimensions: (4.75”x4.75”x1” or 120x120x25mm)

DC12V

Filter, Air Compressor Vapor Filter, Explorer/Spirit

Filter, Electrical Power EMI Filter YE10T1L2 (Mercury's, Spirit's, X-Series)

Fuse, 5-Amp Sensor PCB (LGCC-290090950G)

Fuse, Circuit Breaker (15A/250V ZE-800) for GCC Lasers (All Models)

Fuse, Circuit Breaker (3A/250V ZE-800) for GCC Lasers & Vinyl Cutters

Hinge, Hood LID Hinge for Spirit

Hinge, Window Lid Hinge for ALL GCC LaserPro Machines

Honeycomb \ Vector Cutting Table 1/2" Squares, Spirit Si/Spirit LS, S290 Aluminum Grid Plate Style

The aluminum grid cutting table is an ideal pal for laser cutting. It lifts the workpiece off the work table from hitting by laser reflection while supports it with reinforced aluminum grid design. The dust and vapor created during laser cutting are then taken away effectively through the grid by down vacuum exhaust (suggested using SmartBOX™ together). Rather than handling rigid materials, aluminum grid cutting table also helps to fix flexible materials with the aid of down vacuum SmartBOX™ to keep constant focus distance and consistent cutting result. A clean and better cutting quality is achieved from this technique.

LED, Stack Light & Black Buzzer Alarm Set, For Machines with MainBoard 5272-V3, Models: Spirit LS/GLS/GLS Hybrid/S400

LED's, Lamp Board (Qty4) Upgrade Kit for: Spirit/Spirit LS/Spirit GE/Spirit GX/GLS/S290/S290LS

* This is a replacement for old style LED's #: LGCC-29004053G
** Replacement LED's New Style Part #: LGCC-202003460G

LED's, Lamp ONLY for: Spirit Si/LS/GE/GX/GLS/S290/S290LS

GCC Lens, 2" FD-Blue Rev. 2, Std Co2 Model Lasers (Not Fiber Hybrids)

Co2 Machine Models: Spirit SGX / SLS / SGLS / SGLSHYB-Co2 / C180-I / C180-II (Spirit Si/SGE machines with SN: After I50790+), Dim's: W=1.1"(28mm) x H=1" (25mm)

(Same as 29004737G)

GCC Machine Models:

Spirit Si\SGE\SGX\SLS\SGLS\C180-I & II (For machines with SN: After I50790+) 

Mercury III, MG380Hybrid, X252, X380 (For machines with SN: After U90xxx/T90xxx+)

Lens, 4" FD for Spirit Models

Machine Model: Spirit Si \ SGE-After I50790, SGX, SGLS, SLS, C180-I & II  with .012" Spot Size, Rev. 2 

Machine Model:  Spirit Models, Explorer, Mercury, S400

(Laser Tube GEM 30/50, T,V)

GCC-290069320G Lens, Dust Prevention Window Assembly

(Pen Carriage, SI, SLS, SGLS, C180I, C180II)

Lens, Dust Prevention Window Round Assembly for Co2 Laser Models: (MEIII, Si, SGX, SLS, SGLS, SGLSHYB-Co2, X380, MG380-HYB, Gaia, S400 for Co2 Only on 2nd Prism Mount)

Lock, Front Door Latch Lock, Black-Round (Spirit\Mercury\X-series)

For Rotary Attachments Part #: 29001051G, 29005363G, 290072190G

233014500G Lubricant, Grease 10ml w/45 Deg. Needle for GCC Spirit, Laser Pro Rails (SLS, GLS, GLS-HYB)

Lubricant, Super Lube 51010, Lubrication for Engraving Machines (Laser, Z-Axis Table Leadscrews)

Magnet, Door Interlock Magnets with cable, No Connectors ea. (For All Lasers)

Magnet, No Wires, Door Mount ea.

Magnet, Switch Assembly, for All Lasers. It is made up of: (1) LGCC-22000045G + (1) LGCC-25700015G

Machine Model: Spirit LS, Upgrade Kit

Part Number: 290090410G

Warranty:  6-Months Manufacture.

Upgrade Instruction

MCB, GCC Main Mother Board Type 5272-v1 Green\Red, (Spirit LS & GLS) w/USB & Ethernet Port

Mirror 4, 1" Dia, Carriage Mirror Rev.2 for SGX/C180/GLS/SGLSHYB-Co2/SLS, SI/SGE > After SN: I50790, Mercuy III, MG380Hybrid, X252, X380 SN After SN U90xxx/T90xxx, Venus II SN start from T5619
Base Dims: 1.1" x 1.3" (28x33mm)

Mirror, #1, 1" Diam. For C02 Laser Models

For: Spirit SLS,GLS, SGLSHYBR-Co2, S400-Co2,  Mercury III (for after SN M50659)  " (The 1st mirror)"

New Replacement for LGCC-29003695G (Discontinued Rectangular Mirror)

HSC#: 8466.93.9585

Mirror, #1, 1" Diam-Round. with Prism Bracket (Explorer I, SLS, SI, GLS, SGX, SG, SI Option, Mercury III, H230, H230CS, replacement for #29003695G, #290077670G + 202003240G | for machines shipped from TWN before 2013 August, Before Serial # M50659)

Mirror, #2 or 3, 0.75" Dia. (Venus\C180\Mercury1-3\Explorer\Spirit SI,SGE, SGX, SLS, SGLS\S400-Co2) (Same as 29002522G)

Machine Model: Spirit / Spirit LS-from P53141 / Spirit GLSH CO2 / S400

Mirror, Red Pointer Beam (Spirit SI, SLS, SGLS, SGX, SGE, Mercury I, II & III, Venus I & II, Explorer I & II, X-Series)

Motor, Roll-To-Roll Stepping Motor Assy

Motor, Rotary Attachment for: C180\Mercury\Explorer\Spirit Laser System
(Rotary Attachment 290010151G or 29005363G)

Machine Model: Spirit Si, SGE, S290, SLS and Y-Axis Motor for: Spirit GLS & SGX, Before SN: N52181

Machine Model: Spirit GLS After Serial N52181, Spirit LS,GLS Hybrid, LE (X motor)

Motor, Z-axis, Assembly (Spirit LS, X380)

Paper, Lens Cleaning Tissue Paper For Laser Optics Cleaning (FKA Kodak Lens Tissue, 50 pck, GCC# 26500192)

Paper, Lens Cleaning Tissue Paper For Laser Optics Cleaning, 100 Sheets, 4"x6"

Pass-Through Door Switch Module (Bypass Magnets, Includes Switch & Warning Light) For Models: Mercury III/Spirit/Spirit LS/GLS/GLS Hybrid/X252EX/X380RX/X500III/MG380Hybrid/S400

Board Notes: DC 12VC PCB for Laser Tube Fans

Machine Models: Spirit /Gaia/X500

PCB, Adapter, Laser Power Adapter Power Distribution Board (Spirit Models, Mercury II & III)

PCB, Auto Focus PCB, For Flat Cable, Rev. 2, After SN: N95617 (SLS\SGLS\C180-II, Mercury III, X380, X252)

PCB, DC & AC Fan Control Board Set (with fan), S290/Spirit/Spirit GLS/Spirit LS/GLS Hybrid , GCC 290095420G

PCB, USB & Ethernet Communication Connector Board for 5272v1 MCB

PCB, USB & Ethernet with FlashDrive Communication Board for 5272v2 MCB (All Mach. Except C180's)

PCB, USB & Ethernet with FlashDrive Communication Board for 5272v1 MCB For Spirit Series

PCB, Y-axis Motor Board, For: Spirit Models, Mercury III, S290-Series, X-Series (X252, X380, X500-III, MG380HYB, BK01808A, 23800134G, PC00194A)

Pin, Auto Focus Pin Assy. Spirit-All\S400\C180 Model, (Previous: BK01851 - 29002547G)

Plate For Rotary Attachment, w/o Pad (All Rotary Mach. Attachments)

Plug, Hinge for Top Metal Door Lid, Black-Plastic Plug (Spirit Models)

For GCC Laser Models: Explorer, Si, SLS, SGX, SGE, SGLS, SGLSHYB

* Some models may require soldering

Pointer, Red Pointer Diode For GCC Lasers (S400, Spirit Si|LS\GLS, Length: 234cm, for 5272v3)

Power Supply, Laser Tube PS SLS60w, C180-I 40w Coherent (RSP-1000-48, Synrad Ti60, Machine After Serial #: K51416) 

Power Supply, Laser Tube PS, 48vdc (RSP-1500-48, Synrad Ti80, Iradion 80GT/100GT, Machine After Serial #: K51416) For Machine Model: Spirit LS, S400

Power Supply, Main Board, 40/5v (Spirit Models SGLS/SGLSHYB/SLS/SI/SGX/GE/S290/Explorer, PW00026A, Meanwell, Same as LGCC-29002226G) 3 Month Warranty

Pulley Assy, X-axis Right Block Pulley Assy for Spirit LS, GLS, S290LS