X

CERMARK® ULTRA LASER MARKING

Ferro and the CerMark® Research & Development team is pleased to announce the release of their new product CerMark ULTRA.

  • CerMark® ULTRA is specifically formulated to laser mark on all laser markable substrates such as metals, glass, ceramics and more using just one CerMark product.
  • CerMark® ULTRA renews the tradition set by our LMM-6000 as the industry leader. With the introduction of the NEW patent pending CerMark ULTRA the standard of excellence continues.
  • ULTRA was formulated as a genuine All-Marking product achieving the best results in the industry.

Ferro is proud to introduce CerMark ULTRA, the only product required to do everything you need in laser bonding.

Go
dn
Collar, Clamp, Large Collar, Clamp, Large, 11/64 Spindle-3 Pulley More Info
12/17/2013
R5005004.1
$75.50
Collar, Clamp, Spindle Collar, Clamp, 11/64 Spindle-1 Pulley (912, OD=1.25, ID=0.75) More Info
12/17/2013
R5014025.1
$75.50
Collar, Clamp, Spindle Collar, Clamp, Spindle 1/4 More Info
12/17/2013
R5005014.1
$75.50
Collet, 1/4”, ZC-23-635 Solid Bottom Load Collet (.250")
Collet, 1/4”, ZC-23-635 Solid Bottom Load Collet (.250")

Collet, 1/4"(6.35mm) for: Roland DGA EGX350/EGX400/EGX600, MDX-40, SRM-10, JXW-10
This 6.35mm Collet (Product #ZC-23-635) is for use with bottom loading end mills. It is compatible with the following Roland DGA devices: JWX-10, EGX-300/400/600, MDX-40, and SRM-10.

More Info
1/16/2015
RR-ZC23635
0.5 lbs
$44.95
Collet, 1/8", ZC-23-3 Solid Split Bottom Load Collet 3mm (.125")
Collet, 1/8", ZC-23-3 Solid Split Bottom Load Collet 3mm (.125")

Collet, 1/8", ZC-23-3 Solid Split Bottom Load Collet 3mm (.125") For: DE-3, EGX300/EGX350/EGX400/EGX600

This 3mm Collet (Product #ZC-23-3) is for use with bottom loading end mills. It is compatible with the following Roland devices: JWX-10, EGX-300/400/600, MDX-40, and SRM-10.

More Info
1/15/2015
RRZC233
0.5 lbs
$74.95
Collet, 1/8", ZC-23-3175 Solid Bottom Load Collet 3mm (.125")
Collet, 1/8", ZC-23-3175 Solid Bottom Load Collet 3mm (.125")

Collet, Split, Top Load Collet 3.175mm PNC2300A (1,8") For: EGX300/ EGX350/EGX360

This 3.175mm Collet (Product #ZC-23-3175) is for use with bottom loading end mills. It is compatible with the following Roland devices: JWX-10, EGX-300/400/600, MDX-40, and SRM-10.

More Info
1/16/2015
RRZC233175
0.5 lbs
$74.95
Collet, 11/64" Solid Bottom For: DE3/EGX350/EGX400/EGX600
Collet, 11/64" Solid Bottom For: DE3/EGX350/EGX400/EGX600

Collet, 11/64", Solid Bottom Load Collet 4.36 MM (.171") 

For: DE3/EGX350/EGX400/EGX600, Half Round Cutters

This Collet Holder (Product #1000003391, alternative to discontinued # 21655242) is used with standard cutting tools in the EGX-350. It should not be used with pass-through collets. This holder prevents the cutting tool from dropping through the spindle and damaging the engraving material.

More Info
1/16/2015
RR1000003391
0.5 lbs
$182.95
Collet, 11/64", ZC-E436 Solid Bottom Load Collet (.171")
Collet, 11/64", ZC-E436 Solid Bottom Load Collet (.171")

Collet, 11/64", ZC-E436 Solid Bottom Load Collet (.171") For EGX300\EGX350\PNC-2300A\EGX400\600, Burnishing - Diamond Guide

This Bottom Loading Burnished Guide (Product #ZC-E436) is intended for use with the Roland EGX-Series engravers. The guide is designed for diamond drag applications and must be used with diamond engraving burnishing tools.

More Info
1/16/2015
RRZCE436
1 lbs
$44.95
Collet, 6mm for EGX-300/EGX350/EGX400/EGX600600, JWX-10, MDX-40
Collet, 6mm for EGX-300/EGX350/EGX400/EGX600600, JWX-10, MDX-40

Collet, 6mm for EGX-300/EGX350/EGX400/EGX600600, JWX-10, MDX-40

This 6mm Collet (Product #ZC-23-6) is for use with bottom loading end mills. It is compatible with the following Roland devices: JWX-10, EGX-300/400/600, MDX-40, and SRM-10.

More Info
1/16/2015
RR-ZC236
$45.00
Compressor for Air Assist-High Volume, 220Vac, 3.18 CFM
Compressor for Air Assist-High Volume, 220Vac, 3.18 CFM

Compressor for Air Assist-High Volume, 220Vac,3.18 CFM

A specially designed Air Compressor for laser engravers, by using an oil-less diaphragm, you help eliminate the harmful and damaging side effects of moisture on the laser optics. Also, provides the optimal air pressure your laser needs to blow away vaporized particles and helps prevents overheating. A must to keep lenses and mirrors clean to promote longer laser life. Recommended for production enviroments where laser will be operating eight (8) hours or more.

SPECS:
Voltage: 220vac
Power Consumption: 270 watts
Hz:50/60
Air capacity:86~95 L/min
Outlet pressure is 7~10 kg/cm2 (100~142psi)

More Info
12/18/2016
MGA-29001083G
21 lbs
$600.00
up

Cermark Ultra Black on Ceramic

CERMARK ULTRA LASER MARKING AEROSOL FOR GLASS AND CERAMICS

CerMark® ULTRA is Ferro’s highest performance black laser marking aerosol formulated to achieve the best results in the industry. This all-in-one product eliminates the need to use several materials making it a more economical solution that delivers darker marks created with faster marking times.

Click here to view the page >>

CERMARK ULTRA LASER MARKING AEROSOL FOR METAL

CerMark® ULTRA aerosol is an ethanol-based all-in-one black laser marking aerosol that allows for faster drying time. It is recommended for almost any metal substrate including stainless steel, brass, aluminum, titanium, copper, chrome plating, nickel and similar metals.

CLICK HERE to view the page >>

CERMARK ULTRA LASER MARKING PASTE FOR GLASS AND CERAMICS

CerMark® ULTRA is Ferro’s highest performance black laser marking paste formulated to achieve the best results in the industry. This all-in-one product eliminates the need to use several materials making it a more economical solution that delivers darker marks created with faster marking times.

CLICK HERE to view the page >>

CERMARK ULTRA LASER MARKING PASTE FOR METAL

CerMark® ULTRA paste is an ethanol-based all-in-one black laser marking paste that allows for faster drying time.  It is recommended for almost any metal substrate including stainless steel, brass, aluminum, titanium, copper, chrome plating, nickel and similar metals. 

CLICK HERE to view the page >>

Jorlink USA, Inc,
3714 Alliance Dr., Suite 100
Greensboro, NC 27407
TEL: (336) 288-1613
eMail: sales@jorlink.com

M-F 9am-5pm EST 
Facebook Linkedin twitter Instagram YouTube
Jorlink USA, Inc. BBB Business Review