For COVID-19 Updates and Vendors Please Click Here
SmartBOX (Optional Accessory) An innovative technology that integrates the ventilation box with a honeycomb table. The result is not only a precise cut with sharp edges, but also a clean laser table to work on.
SmartMemory Optional SmartMemory allows you to save daily jobs into the engraver so that every morning your graphics are ready to go.
Pass-through Front/Rear Doors A design with doors on both ends to accommodate extremely long working pieces without the need for a screwdriver.
Reliable Motion System Systematic and reliable motion system embedded with strong mechanical framework and accurate servomotor control technology to deliver superb output quality under rapid movement.
ergency Stop Big red button located on the top of the machine allows operators to stop the laser and the motion carriage immediately to provide highly safety operation.
RoHS Compliance As a market leader and an environment-friendly product manufacturer, GCC is committed to make all-out efforts to preserve the global environment. Our products are compliant with the European Parliament Directive 2002/95/EC, Restriction of Hazardous Substances(RoHS).
SmartCenter Smart Center -Technology to Facilitate Positioning within Seconds
*Above specifications are subject to change without notice.
Made in the USA
The CO2 laser tube is the most critical component of a laser engraver. GCC LaserPro offers the best and most reliable CO2 laser available in the industry. Synrad CO2 lasers are built in the United States with the most advanced laser technology. The laser product is proven to be the most reliable brand with tens of thousands of installations all over the world. GCC LaserPro choose Synrad laser to be a partner. Leader always works with leader; both GCC and Synrad are dedicated to provide customer the best quality product. GCC and Synrad are your best choice.
Specifications
Spirit Model No.
S-12
S-25
S-40
S-60
S100
Laser Source
12W
25W
40W
100W
Air cooled, Sealed CO2 laser
Powered By Synrad-Made in the USA
Working Area
25" X 18" (640mm X 460mm) - Extendable to 29" X 18" (736mm X 460mm)
Max. Working Piece
All doors closed
31.5" X 22.4" X 6.5" (800mm X 570mm X 165mm)
All doors open
26.8" X infinity X 6.5"; (800mm X infinity X 165mm)
Table Size
31.1" X 20.9" (790mm X 530mm)
Overall Dimensions
44.3" X 28.3" X 39.6" (1125mm X 735mm X 1005mm)
Drive
DC Servo control
Speed Control
Available from 0.1~100% of 60ips with up to 16 colors linked speed setting per job
Power Control
Available from 0.1~100% and 16 colors linked power setting per job
Z Axis Moving
Automatic
Resolution (DPI)
Available 125, 250, 300, 380, 500, 600, 750, 1000
Computer Interface
Standard print port and USB port
Memory Buffer
32MB standard and upgrade to 64MB
Lens
Standard 2.0" focal lens in enclosed lens carriage; optional lenses available. (1.5", 2.5", 4.0")
Display Panel
4-line LCD display showing current file name, total working time, laser power, engraving speed, files loaded into memory buffer, setup and diagnostic menus
Safety
Class IIIR for red pointer
Facility Requirements
Electricity
100~240VAC auto switch
220-240VAC
Power Consumption
700W
880W
3300W
4400W
Exhaust System
External exhaust system is required, one 4-in. connection on the back of the machine
Quick Contact: Tel: (336) 288-1613 Toll Free (866)288-1613
Shipping by:
PackTrack | WWE
Sales: Product/Service Inquiry
Create Support Incident Ticket
Proudly Serving:
