Roland Engraver Parts

Adapter, Vacuum Remote Adapter 3.5mm Cord/24VDC, Roland Mill or Engraver Communication Remote (#11054)

AS-5 By Roland, Adhesive Sheet Hold-down System (Pack of 5)

Bag, Vacuum Filter Bag (3-pk) for Chip Removal System
Filter bag (3-pk) for chip removal system
PRODUCT NUMBER: US-FLTRBAG-A3
This product #US-LN10 is a set of 3 replacement filter bags for the Chip Extraction System (Product #US-CHIPSYS-C). The Chip Extraction System is used with EGX-20/30/30A, EGC-350/360, EGX-400/600 and DE-3 engravers.

Bag, Vacuum Filter Bag (5-pk) for Chip Removal System
Filter bag (5-pk) for chip removal system
PRODUCT NUMBER: US-FLTRBAG-A5
This product #US-LN10 is a set of 5 replacement filter bags for the Chip Extraction System (Product #US-CHIPSYS-C). The Chip Extraction System is used with EGX-20/30A, EGC-350/360 and EGX-400/600 engravers.

Bag, Vacuum Filter Single Bag (1-pc) for Chip Removal System
Filter bag (1-pc) for chip removal system
This product single replacement filter bag for the Chip Extraction System (Product #US-CHIPSYS-C). The Chip Extraction System is used with EGX-20/30A, EGC-350/360 and EGX-400/600 engravers.

Belt, Roland Spindle EGX20/EGX350/EGX400/EGX600, A-1CEBRF 5 x 170

Belt, X-Axis Roland EGX400 & EGX600

Belt, Y-Axis Roland EGX600 (150S2M569LW-C)

Board, Spindle Board Assy, EGX400/600
(Schematic Part # 20)

Board, XY Board Assy, EGX400/600

Board, XZ Board Ass’y, EGX400/600 (W589356070)

Brushes, Motor, Roland Vacuum Chip Removal System

Cable Assy, HCL-T5-1MP-BL EGX400/600

This replacement cable (Product #13509781) is for use with the EGX-400/600 engravers. It connects the machine to the controller, also known as the handy panel.

Cable, EGX-400 Cable-Card 20Pin, 44" (From MMC Board to MCB, 1120mm-L)

Cable, USB to Serial Communication (Roland ME-US3, EGX400\EGX600, EGX30) with Online Setup & Installation

* Driver Download & Installation Required by Online Appt.

Clamp-Table, Short (each)

Collet, 1/4"(6.35mm) for: Roland DGA EGX350/EGX400/EGX600, MDX-40, SRM-10, JXW-10
This 6.35mm Collet (Product #ZC-23-635) is for use with bottom loading end mills. It is compatible with the following Roland DGA devices: JWX-10, EGX-300/400/600, MDX-40, and SRM-10.

Collet, 1/8", ZC-23-3 Solid Split Bottom Load Collet 3mm (.125") For: DE-3, EGX300/EGX350/EGX400/EGX600

This 3mm Collet (Product #ZC-23-3) is for use with bottom loading end mills. It is compatible with the following Roland devices: JWX-10, EGX-300/400/600, MDX-40, and SRM-10.

Collet, Split, Top Load Collet 3.175mm PNC2300A (1,8") For: EGX300/ EGX350/EGX360

This 3.175mm Collet (Product #ZC-23-3175) is for use with bottom loading end mills. It is compatible with the following Roland devices: JWX-10, EGX-300/400/600, MDX-40, and SRM-10.

Collet, 11/64", Solid Bottom Load Collet 4.36 MM (.171") 

For: DE3/EGX350/EGX400/EGX600, Half Round Cutters

This Collet Holder (Product #1000003391, alternative to discontinued # 21655242) is used with standard cutting tools in the EGX-350. It should not be used with pass-through collets. This holder prevents the cutting tool from dropping through the spindle and damaging the engraving material.

Collet, 11/64", ZC-E436 Solid Bottom Load Collet (.171") For EGX300\EGX350\PNC-2300A\EGX400\600, Burnishing - Diamond Guide

This Bottom Loading Burnished Guide (Product #ZC-E436) is intended for use with the Roland EGX-Series engravers. The guide is designed for diamond drag applications and must be used with diamond engraving burnishing tools.

Control Panel, EGX400/600

Ring, Depth Noze-Metal (Thick) For: EGX300\EGX350\EGX400\600\ZDN-200

 Comparison Chart

Fonts

EngraveLink Foundation Ver. 10 by CADlink for Rotary Machines

EngraveLink, Version 10, Same as EngraveLab Foundation with Extra Features which Includes: Roland & Meistergram Driver Support with Meistergram D14 Software file Import, Badges & Arc Feature. MSRP $795.00 

Provides you with a solid beginning to computerized engraving with tools for all your basic engraving needs.

Begin with industry-leading import filters, extensive file format support includes DXF, EPS, AI and PDF. Enhance your basic text with imported graphics, and improve your engraving efficiency with single-line engraving fonts. Output to a variety of Rotary Engravers, Vinyl Cutters, and CNC Machines.

MCB, Roland DGA Main Mother Board for EGX400/600 Engraver (#19, 7589350000)

Micrometer, Ring Dial Set-Spindle for EGX400/600

MMC Board, Assy., EGX400/600 (Control Panel Connector PCB-Front of Machine)

Motor, Replacement Motor – 97047 (Replaced Blue Dot # 97005 & 97038)
For: RRUSCHIPSYSC 

Motor, Spindle For EGX400/600

RR22435425 Motor, XY Axis EGX400 / EGX600 24DCv

RR22435426 Motor, Z Axis EGX400 / EGX600, Roland Rotary

Nose Cone Adapter (2pcs), For: DE3, EGX350, EGX400, EGX600 Teflon Spindle Cone
(SRP $36/ea)

PCB, Trans Board 1 LF EGX600 Assy (Schematic Part# 52)

Plate, T-Slot 1 Roland EGX400, 1-Left Side

Plate, T-Slot 2 Roland EGX400, 1-Center-Single

Plate, T-Slot 3 Roland EGX400, 1-Right Side

Power Supply Unit, Roland EGX400\600, ZWS150PAF-36/J SP-300/VP-540/JWX-10 (Schematic Part# 38, Previous # 12429114)

Spindle, Roland EGX400/600, 1164" Assy. w/o Collet or Micrometer (90 Day Warranty)

Note: After you replace the spindle, you need to run it without any load with no tool or collet installed for approximately 20 minutes at 15000-RPM

Switch, Emergency Stop Cable-Assy EMG EGX400 / EGX600

Switch, Z-Axis Cover, Z-axis Limit & X-axis Limit, Cable Assembly Sensor, EGX400\600

Vacuum Adapter For Roland EGX400\600, ZAD-600
This Vacuum Adapter (Product #ZAD-600) is to connect the machine to the hose of the vacuum. This item is included in the Chip Extraction System (US-CHIPSYS-C). This adapter is for use with the EGX-400/600 engravers.

Vacuum, Chip Extraction Sys. UltraQuiet, 1/2hp w/accumulator

Key Features

• This chip removal system is quiet and efficient to use in any shop.
• The vacuum not only keeps your works space clear of debris, but it also filters 99.99% of dust out of the air!
• The systems are also self-contained so it can be used to reclaim precious metals.
• The vacuum hose supplied slips onto the vacuum connection on top of the unit and the other end connects to the collection device desired.
• The ideal location for the US-CHIPSYS-C is under the bench where the user works.

US-CHIPSYS-C Specifications

• Usage: Single station use for collecting dust at 1.5” diameter workstation
• Speeds: Single Speed
• Size: 14.Lx10.Wx12.H
• Power Requirement: 115 VAC 5A
• Overload Protection: Resettable circuit breaker included.
• Sound rating: 53db on High
• Dust Collection: Collects 99.99% of all dust (filter rated at 95% @ 1 micron)
• Motor Rating: High-Performance ½ Horsepower Motor

Vise, Fixture Kit (Vise, Pin Jig, Pen Fixture, Ruler Bar Fixture, 2 Medallion/Seal Fixtures) For: EGX-300/350/360/400/600

Wrench, EGX-350 Spanner Wrench Tool (2 sided)

* This Tool Spanner (Product #21935111) is used to install and tighten collets within the spindle. This spanner is intended for use with the EGX-350 and EGX-400/600 engravers.