X

 

SUPPORT TICKET

 
 

Eagle Laser

Engraving Machines

The exceptional creativity, expertise, and relentless determination of our team continuously challenge the boundaries of technology to enhance efficiency and productivity through cutting-edge systems.
One of our main advantages at Eagle is our ability to fully utilize and benefit from fiber laser technology from the very beginning. Unlike many of our competitors who had to modify existing technologies to incorporate fiber, we designed and constructed every component of our products specifically for fiber laser technology. This has given us a significant edge in the market after 16 years of experience.

G-1325 LARGE FORMAT LASER CUTTING MACHINE
G-1325 LARGE FORMAT LASER CUTTING MACHINE
Intro image 3 Intro image 4 Intro image 5
49" x 98" (1250mm x 2500mm)
130W; 150W
10/12/2022
G-1325
send a quote request
Add To Cart Buy It Now Add To Wish List

Description

Our large format laser cutting machines offer an economical solution for large format, fine or speedy cutting of acrylics, cardboard, wood, textiles and much more.

The G-1325 large format laser cutting machine, with 49″ x 98″ (1250 x 2500mm) working area, all axis transmitted by high-precision ball screws on advanced linear rails, and driven by servo motors, ideal for standard 48″ (1200mm) wide uncut sheet material, offers an economical solution for fine cutting of acrylics, cardboard, wood, POM and much more. Our laser machines are the most robust, accurate, and reliable on the market.

Available in: 130W and 150W

 

130W CO2 laser is the most cost effective choice for cutting (can cut acrylic up to 1" in thickness). 150W CO2 laser is best suitable for cutting ultra-thick materials (can cut acrylic up to 1-1/4" in thickness).
Technical Specifications
 
G-1325
H-1325
Working Area
 49″ x 98″ (1250 x 2500mm) 51″ x 98″ (1300 x 2500mm)
Max. Workpiece Height
 1-1/4″ (30mm)
Working Table
 An aluminum strip table for hard and flammable materials (acrylic, cardboard, wood, etc.).
Laser Source
 CO2 Sealed Glass Laser Tube
Laser Power*
 130W / 150W
Laser Configuration
 Single laser
Focal Lens*
 Standard 3.75″ (95.25mm), optional 2.5″ (63.5mm). 2.5″ (63.5mm)
Software*
 For the customized EAGLECAM control system, EagleWorks CAD/CAM and EaglePrint print driver, compatible with Windows 7/8/10. And 100% support LightBurn software.
For the standard RDC644xG control system, RDWorksV8 CAD/CAM, compatible with Windows 7/8/10.
RDCMarkVision CAM for the camera tracing system.
Machine/PC Connection
 USB / FLASH / LAN
Operating Mode
 Cutting / Engraving / Combined
Control Interface
 True Color TFT LCD panel with function buttons.
Memory Capacity
 Multiple jobs storage up to 128M.
Resolution
 Up to 4064 DPI.
Motion System
 Transmission with ball screws on advanced linear rails, driven by servo motors. X axis transmitted with belt on advanced linear rails, driven by stepper motors. Y axis transmitted with rack and pinion on advanced linear rails, driven by servo motors.
Accessories
 Air assist pump, industrial chiller and exhaust blower included.
Electrical Requirement
 220V/50Hz, single phase, up to 6.0kW.
Size
 75″ x 142″ x 53″ (1900 x 3600 x 1350mm) 79″ x 142″ x 39″ (2000 x 3600 x 1000mm)
Net Weight
 2200lb (1000Kg) 1940lb (880Kg)
Note: All specifications marked with * depend on configurations of the laser machine.
Material Compatibility
 
Engrave
Cut
Acrylic
 ● ●
Cardboard
 ● ●
Wood
 ● ●
POM
 ● ●
Laminates
 ● ●
Stone
 ● –
Glass
 ● –
Coated Metals
 ● –

Features

Our large format laser cutting machines are designed with user convenience and flexibility in mind. Hardware and software are integrated in a complete, ready-to-use package with many features that enhance usability and profitability.

Large Format Working Area

The 49” (1250mm) working width of the G-1325, and the 51″ (1300mm) working width of the H-1325, comfortably accommodate standard 48” (1200mm) wide sheet material, while the 98” (2500mm) working length is ideal for one-pass processing of uncut sheet.

Open Structure with Dual Direction Material Loading*

The open structure of the laser machines ensures easy loading and unloading of large sheet material. You can load material from front to back, or even from right to left on the G-1325, and pick up processed parts on every corner of the working area with ease.

Aluminum Strip Working Table

The laser machines feature an aluminum strip table for hard and flammable materials (acrylic, cardboard, wood, etc). The strips are separate and removable, and you can remove some of them based on design patterns to avoid laser reflection and get a clean cut edge.

Deep Collecting Bay and Pick-Up Drawer

After cutting, parts small enough to fit through the strip table will drop down to a deep collecting bay, avoiding damage by the laser during subsequent cutting operations. They can be retrieved simply by opening the drawer after cutting is complete.

Motorized Laser Head on the G-1325

The laser head of the G-1325 features powered up and down movement, to accommodate material with different thickness.

Choice of Focusing Lens*

The G-1325 offers two focal lengths of lens for use in the laser head. The 3.75” (95.25mm) lens is best for cutting material over 20mm thick, while the 2.5” (63.5mm) lens is ideal for thin material cutting and engraving. The laser head has two lens mounting positions, so the spacing from the bottom of the focus measure plate to the material is the same with both lenses.

The H-1325 has only one 2.5″ (63.5mm) lens for thin material speedy cutting and engraving.

Air Assist Mechanism*

The laser head of the G-1325 includes an air assist assembly, and a pressure regulator installed on the frontside of the machine. While the laser head of the H-1325 includes an adjustable air assist assembly instead. A constant stream of compressed air protects the lens from dust or cutting vapor, and sweeps the cutting surface, reducing the possibility of flaming, scorching, or charring when cutting materials such as acrylic or wood.

Adjustable Nozzle on the G-1325

There is a ring on the laser head, which can be rotated to adjust the spacing between the nozzle and material, independent of laser head up and down movement.

We offer two nozzles with different size for use in our laser heads. When cutting flammable material, such as cardboard or wood, you should use the small one, and reduce the spacing between the nozzle and material at the same time, to increase air pressure. When engraving or improving quality of cutting edge (e.g. cutting acrylic), you should use the big one, and increase the spacing between the nozzle and material at the same time, to reduce air pressure.

You can also adjust the nozzle’s level position to make the air flow coaxial perfectly with the laser beam, by using the four screws above the nozzle.

Camera Tracing*

The H-1325 features a camera system installed besides the laser head, provides a real-time tracing function which can find the accurate position of the pre-printed or pre-made artworks, and guide cutting based on it.

Front Panel Display and Controls*

The laser machines are equipped with a high performance control system with a user-friendly interactive panel.

The high-resolution, true color TFT LCD panel lets you preview machine status and job details before processing. You can adjust parameters for different materials, or even run a processing simulation on the panel.

While processing, you will see real-time status information on the panel, and you can adjust parameters on the fly according to the results you are seeing.

Reliable Off-line Operation and Hot Restart

If there is a power failure or the emergency stop is hit, all configuration and job status information is automatically saved. After the problem is cleared, cutting or engraving can resume exactly where it left off, preventing material wastage.

Embedded flash storage in the controller lets you transfer jobs to the machine by USB, Ethernet or flash drive and finish processing offline without relying on a connection to your PC.

Design and Machine Control Software*

We supply your machine with EagleWorks (or RDWorks based on the control card installed on the machine), a complete software solution for creating, editing, optimizing, and processing patterns for laser cutting and engraving. You can import a design from your favorite CAD or illustration program, or create an original design with the EagleWorks software. Then you can adjust the cutting/engraving order, specify the layout within the processing area of the machine, run a processing simulation, and finally control the machine directly from inside the software running on your PC.

Print Driver*

As an alternative to using the EagleWorks software, you can run the machine directly from within your favorite CAD or illustration program using our print driver. This software makes the laser machine look to your computer as if it were just another printer, to which you can “print” from any application, including AutoCAD, Adobe Illustrator, Photoshop, CorelDRAW, etc.

When controlling the machine through the print driver, you use color and line thickness settings in the drawing to control the laser power (cutting vs. engraving) and the order of cutting. This allows you to easily combine cutting and engraving in a single job, for faster processing and more precise control of the laser.

Half-toned photographs and other images can be laser-engraved by “printing” directly from inside your favorite image editing software. When using software that supports both raster images and vector drawing (e.g. Adobe Illustrator, CorelDraw, etc) a simple one-step Print command can do both cutting and engraving simultaneously.

100% Compatible with LightBurn Software*

LightBurn is layout, editing, and control software for your laser cutter. With LightBurn you can:

  • Import artwork in a variety of common vector graphic and image formats (including AI, PDF, SVG, DXF, PLT, PNG, JPG, GIF, BMP)
  • Arrange, edit, and even create new vector shapes within the editor, with powerful features like offsetting, boolean operations, welding, and node editing
  • Apply settings like power, speed, number of passes, cut order, brightness & contrast, dithering mode, and much more
  • Send the result directly to your laser cutter

LightBurn is a native application written for Windows, Mac OS, and Linux, and talks directly to the laser, without the use of additional software.

A Complete Set of Accessories

We provide a complete, ready-to-use package with all the necessary parts to get your machine up and running.

A high quality industrial water chiller circulates cooling water through the laser tube, ensuring continuous and stable laser output power.

A powerful exhaust blower maintains negative pressure within the entire machine enclosure, ensuring efficient extraction of dust and fumes from both above and below the work piece.

We supply all the ductwork needed to vent the machine to the outside.

Just connect it all together and you are ready to run your first job!

Note: All features marked with * depend on configurations of the laser machine.

Technical Advantages

Our large format laser cutting machines include many high-end design elements that give our machines superior speed, accuracy, reliability and service life.

Strong Body and Structure*

The G-1325 features a high strength steel pipe welding frame, and a light aluminum X-axis beam without sacrificing strength, in order to ensure high speed, high precision and long-term operation.

High Performance Motors*

With motors from world’s leading supplier, the laser head of the laser machines can move very fast at extremely high resolution. A step size of just 6.25μm gives the machine a resolution of over 4064DPI. In arbitrary-direction cutting, the head can accelerate at 2 m/s2 (0.2G).

Robust, High-precision Ball Screws and Rails on the G-1325

The ball screws and linear rails used in the G-1325 are thicker and stronger than in competitive models, ensuring long-term stability of the laser path. That means less downtime, more productivity, and more profit.

Robust, High-precision Racks and Rails on the H-1325

The racks and linear rails used in the dual sides of the H-1325 ensure speedy movements of the whole X-axis beam, bring you more productivity, and more profit.

Superior Laser Sources*

The laser machines can be equipped with single 130W or 150W glass CO2 laser tubes, all with great cost performance ratios.

High Quality Optics

The laser machines are equipped with top-quality, American-made optics, to provide a consistent laser beam across the entire working area. This allows the laser machines to achieve industry-leading cutting and engraving quality.

Superior Mirrors and Mirror Mounts*
The laser beam is carried from the laser tube to the laser head by a series of mirrors, whose alignment is crucial for good performance. Our mirror mounting and adjusting system is the best in the world, designed for stability and ease of use. In most cases the machine will not require any alignment after installation, but if it goes out of calibration for any reason, three adjustment screws per mirror allow you to achieve perfect alignment with minimal frustration.
Safety and Reliability

The laser machines are designed, engineered, and built with safety and reliability in mind.

We use electronic parts from the world’s leading suppliers and build the system to international standards. Sensors throughout the machine detect unsafe conditions, including laser cooling water pressure or flow failure, and so on. The machine will stop automatically if any unsafe condition is detected. There is also a panic button on the front panel which will immediately and completely shut down power to the laser and motors.

Note: All technical advantages marked with * depend on configurations of the laser machine.

Reviews

SALES

COMMERCIAL:
Mackenzie Quiros
mackenzie@Jorlink.com
(336) 604-2942

INDUSTRIAL \ EDU:
Reggie Wright
reggiew@Jorlink.com
(336) 604-5503

GOVERNMENT:
Orlan Hayes
gov@jorlink.com
(336) 604-5502

MEXICO:
Luis Flores
luisf@Jorlink.com
(521) 55.352-21923
SOUTH AMERICA:
Eduardo Castro
eduardoc@Jorlink.com
Costa Rica (506) 8694-7138		  
Jorlink USA, Inc,
3714 Alliance Dr., Suite 100
Greensboro, NC 27407
TEL: (336) 288-1613
eMail: sales@jorlink.com
M-F 9am-5pm EST 
Facebook Linkedin twitter Instagram YouTube
Jorlink USA, Inc. BBB Business Review