X

Create HelpDesk Ticket

In celebration of 4th of July Independence day, we will be closed 4th & 5th

Laser Equipment Ideal For The Hobbyist

Go
dn
RAM, Chip, 32MB Memory, SIMM, 72-Pin, (Explorer/Spirit)
RAM, Chip, 32MB Memory, SIMM, 72-Pin, (Explorer/Spirit)

RAM, Chip, 32MB Memory, SIMM, 72-Pin, (Explorer/Spirit)

More Info
12/17/2013
LGCC-21500017G
21500017G
1 lbs
$195.00
Ring, Nose-Guard for EGX30\EGX30A (CS-20)
Ring, Nose-Guard for EGX30\EGX30A (CS-20)

Ring, Nose-Guard for EGX30\EGX30A (CS-20)
* Previous Part #: 21515103 Replaced by  1000022641

More Info
2/26/2016
RR1000022641
1000022641 21515103
0.5 lbs
$115.95
Roller Assembly, T500 Y-axis Rollers
Roller Assembly, T500 Y-axis Rollers

Roller Assembly, T500 Y-axis Rollers

More Info
7/30/2021
LGCC-290125700G
290125700G
0.5 lbs
$92.40
Rotary Attachment for GCC C180-I & II Laser

Rotary Attachment for GCC C180-I & II Laser

Engraving on cylindrical or spherical objects has always been considered to be complicated and problematic. These objects are difficult to pinpoint, and cannot rotate freely when engraving takes place, given that engraving is only possible in small or restricted areas. However, now through LaserPro's Rotary Attachment device, engraving on cylindrical and sphere-shaped objects will become simple and effortless.

LaserPro Application Lab had previously introduced Rotary Attachment in the showcase titled Sip A Drink From Your Own Personalized Glass Cup, but there are still users who are not familiar with the Rotary Attachment's capabilities. Therefore we will attempt to simplify the setup process and clarify positioning modes, advocating to ease the initialization phase for our users.
Moreover, we will exhibit steps to apply the Position Mode and demonstrate how to utilize its Driver functions to efficiently complete all settings. Users are no longer required to spend unwarranted time so as to modify required and precise positioning; they will be able to engrave on demand. We believe that all users will love this new and thoughtful addition.
 

Click Here to see C180 Rotary Attachment Setup.

Click Here to see Tennis Ball rotary laser engraved.

 

 

C180II’s rotary attachment.

 

cid:image001.png@01D3E2C6.9D5FA750

cid:image003.jpg@01D3E2C6.9D5FA750

 

Work Piece Limitations

 

Maximum Length

 

250mm (9.8 inches)

 

Maximum Loading Weight

 

3 kg (6.6 lbs.)

 

Minimum Diameter (Small Conical Fixture)

 

12 mm (0.5" inches)

 

Maximum Diameter (Small Conical Fixture)

 

50 mm (1.9" inches)

 

Minimum Diameter (Large Conical Fixture)

 

90 mm (3.5" inches)

 

Maximum Diameter (Large Conical Fixture)

 

120 mm (4.7" inches)

 

Maximum Outer Diameter

 

176 mm (6.9 inches)

 

 

Exchange the Conical Fixtures:

Depending on the shape of the workpiece, you can exchange different designs of front and back fixtures to fit the materials as below illustration.

cid:image004.png@01D3E2C6.9D5FA750

 

cid:image005.png@01D3E2C6.9D5FA750

 

More Info
12/7/2016
MGA-29005363G
29005363G
3
20 lbs
$1,295.00
Rotary Attachment for Mercury, Explorer or Spirit Si\LS\SGX\SGE \ X-Series

Rotary Attachment for Mercury, Explorer or Spirit Si\LS\SGX\SGE\ X-Series Lasers

WORKPIECE LIMITATIONS:

Max. Length: 450 mm (17.71 inches) for 29001051G 
Max. Loading Weight: 7 kg (15 lbs.) 
Minimum Diameter (Small conical fixture) 12 mm (0.5 inches)
Maximum Diameter (Small conical fixture) 50 mm (1.9 inches)
Minimum Diameter (Large conical fixture) 90 mm (3.5 inches)
Maximum Diameter (Large conical fixture) 120 mm (4.7 inches)

More Info
12/17/2013
MGA-29001051G
29001051G
18 lbs
$1,295.00
Rotary Attachment For T500 with 45 Deg. Tilt

Rotary Attachment For T500 with 45 Deg. Tilt,

Specification information:
Maximum Length: 1000 mm (39.2")
Maximum Loading Weight: 4 kg (8.8 lbs.)
Minimum Diameter: 0.5 mm (0.02 inches)
Maximum Diameter: 120 mm (4.7 inches)

More Info
7/11/2017
MGA-290102240G
290102240G
25 lbs
$3,995.00
Rotary Attachment for X500-III Laser

Rotary Attachment For GCC: X500-III

Max Length: 1020mm (40inch)
Max Loading Weight: 4 kg (8.8 lbs.)
Min Diameter: 7 mm (0.27")
Max Diameter: 120 mm (4.33")

Allows the laser system to perform at another level! By using the rotary attachment, engraving on cylindrical or round objects is now possible. This option uses a fourth axis to rotate your object 360° to allow engraving on cups, wine glasses or even a baseball with two types of conical fixture available. The minimum inner/maximum outer diameter and length of the working object is 7 mm / 120 mm and 1020 mm respectively. Its maximum weight should not exceed 4kgs.

HTS#: 8466.93.5385

More Info
12/20/2023
MGA-290104191G
290104191G
6
15 lbs
$1,995.00
Rotary Attachment-Chuck for S400, Spirit, SLS, SGLS, SGLS-HYB, S290 Laser System

Rotary Attachment-Chuck for S400, Spirit, SLS, SGLS, SGLS-HYB, S290 Laser System
Features: (1) Tilt up to 45 deg. to mark the inner side of the ring (2) max. diameter: 86mm & max. length: 400mm without tilt

Specification information:
Maximum Length: 1000 mm (39.2")
Maximum Loading Weight: 4 kg (8.8 lbs.)
Minimum Diameter: 0.5 mm (0.02 inches)
Maximum Diameter: 120 mm (4.7 inches)

Cutting & Engraving Video

S290 Rotary Attachment Video

More Info
4/19/2020
MGA-29006016G
29006016G
3
Ship DIM's: L31"xW13"xH12" @ 20-Lbs
20 lbs
$4,500.00
Our Sale Price: $3,995.00
You save: $505.00 (11.22%)
Rotary Pad Tray for Flat Flange on Rotary Attachment (All Mach)
Rotary Pad Tray for Flat Flange on Rotary Attachment (All Mach)

Rotary Pad Tray for Flat Flange on Rotary Attachment (All Mach)

More Info
5/31/2018
LGCC-24100167G
24100167G
0.5 lbs
$12.00
Screw, Plastic for Auto Focus Pin M4 (Venus, Mercury)
Screw, Plastic for Auto Focus Pin M4 (Venus, Mercury)

Screw, Plastic for Auto Focus Pin M4 (Venus, Mercury)

More Info
12/17/2013
LGCC-26500252
26500252G
0.5 lbs
$4.25
up
Jorlink USA, Inc,
3714 Alliance Dr., Suite 100
Greensboro, NC 27407
TEL: (336) 288-1613
eMail: sales@jorlink.com

M-F 9am-5pm EST 
Facebook Linkedin twitter Instagram YouTube