Bottom Side Discharge 

Brush Motor

SPH 800 

• Twice as powerful as the SPH 400, this is our most powerful unit for medium to heavy duty laser applications
• Designed to fit into an application where direct capture from the source is possible the SPH uses high power blower motors to pull the air through 3 stages of filtration consisting of a pre-filter for large particulate, a certified HEPA filter to capture 99.97% of all particulate greater than 0.3 micron and a chemical filter with up to 80 lbs. (36kg) of odour and VOC treatment
• LaserBlue Gel seal guarantees NO BYPASS
• This unit is available in brushed and brushless versions with up to 560cfm.
• This unit has many options and can be customized for OEM applications
  Compact installation requiring no bulky and expensive ductwork
• Filters easily accessed and changed in less then 1 minute ( no tools required )
• Powder coated durable welded cabinet
• Recirculating purified air reduces heating and air conditioning cost

• Filters:  (2) F166 PAD, (2) F071, (2) F074, (2) AG097

• 230 volt, 2 x  4" inlets

• bottom grill discharge 

•  variable speed contro

•  (3) AR176 Brush motors

•  8' of HD hose

SPHm1163B Mini Deluxe.  Multi-Purpose Dust Collector 

• Capture fumes and particulate debris at source
• Multiple filter arrangement allows for disposable bag, HEPA cartridge and gas phase filter
• Quiet (52 dBA) with built in whisper quiet features
• Portable design can be installed anywhere
• Specialty chemical filters can be incorporated to deal with toxic and/or nuisance odors, contact us for custom applications
• Automated controls available
• AMP:  7 (120V.)  3 (240v.)
• CFM 141 m³ / min
• FILTERS :  AG162, AG140, F180

SPHm 1161B Mini Basic.  Multi-Purpose Dust Collector 

• Capture fumes and particulate debris at source
• Multiple filter arrangement allows for disposable bag, HEPA cartridge and gas phase filter
• Quiet (52 dBA) with built in whisper quiet features
• Portable design can be installed anywhere
• Specialty chemical filters can be incorporated to deal with toxic and/or nuisance odors, contact us for custom applications
• Automated controls available
• AMP:  7 (120V.)  3 (240v.)
• CFM 141 m³ / min
• FILTERS :  AG162, AG140, F180

SRM-20 Kit

Includes:

Vectric software SRM-20 , Diamond Drag , Tooling , V-Bit Tooling , 1/4” and 1/8” Collets , Bed Offset Hardware , Indexing Fixture , Centering Vise , AS-10 Sheets

Compressor for Air Assist-Medium Volume Laser Engraving Applications, 115Vac, 1/6HP Oil Free Twin Cylinder, Max. 80PSI (Working Pressure: 0-60PSI, Flow: 1.14CFM)
One (1) Year Manufacturer's Warranty if purchased.

365GC Support Plan, Yearly Diagnostic Remote Contract

2nd-Additional Years Price: $495

* Hours of Operation: 9:00am - 5:00pm M-F (EST)

- Program Start Date begin with the date on this invoice and End on its' One (1) Year Anniversary.

- This program covers technical troubleshooting of software and equipment ONLY.

- This program covers 30-minutes of Q&A, “How to”.  For more in-depth training, we recommend our pre-paid 1-3-hour training sessions.

- We will attempt to assist in the repairs of your product, after a certain amount of time (~2+ Hours) we may recommend on-site assistance.

HOW IT WORKS:

1. Call us at (336) 288-1613 Ext. 202, Lets us know if you a Yearly Support Contract & you require troubleshooting Support.
2. Login on-line to our Support Portal (www.JORLINK.com > SUPPORT > CREATE HELPDESK CASE), create a case and enter your details with Severity of the problem.
3. We will contact you within 2-8 Working hours via phone or email, depending on severity of your case.
4. We will troubleshoot the problem for 30-60 minutes, thereafter we may upgrade your case to LEVEL II support.
5. If Level II support is not able to rectify the problem, we will suggest an on-site visit with labor and expenses as additional charges.

BENEFITS:

1) A ten (10%) Discount on Labor & Most Parts\\Supplies (Cermark Products & Tube repairs are excluded)

2) Helpdesk tracking for your case with SLA Service

3) Expert technical support from a Level I or Level II team

4) Returns allowed on parts with a Standard Re-stocking Fee, see our Terms & Conditions-Policies

5) Extended hours of operation, Appt Link: https://jorlink.com/contact-us

6) Loaner tools can be provided for troubleshooting purposes such as our Laser Tube Power Meter (Value at $150/loan)*    

*$50 Processing/ship fee applies

Rev. 03/30/2023MQ

Blades, Roland, 5 Pack, 25 Dg.\.125 Offset Blade For Thin Materials (Roland CAMM-1-All Cutters)

This 25° blade is used when cutting very thin materials. It is excellent for cutting t-shirt transfer materials and polyester films like window tint. The Roland part number USA-C125-5 is compatible with all Roland vinyl cutters and printer/cutters. This item is a pack of 5 vinyl cutter blades.

Blades, Roland, 1 Pcs, 45 Dg.\.25 Offset Blade For All Purpose (Roland CAMM-1-All cutters)

This 45° blade is used for cutting standard thickness materials. It is excellent for general purpose cutting of 2-3 mil adhesive backed substrates. The Roland part number USA-C145-1 is compatible with all Roland vinyl cutters and printer/cutters. This item contains 1 vinyl cutter blade.

Blades, Roland, 3 Pack, 45 Dg.\.25 Offset Blade For All Purpose (Roland CAMM-1-All cutters)

This 45° blade is used for cutting standard thickness materials. It is excellent for general purpose cutting of 2-3 mil adhesive backed substrates. Compatible with all Roland vinyl cutters and printer/cutters. This pack contains 3 vinyl cutter blades

Blades, Roland, 5 Pack, 45 Dg.\.25 Offset Blade For All Purpose (Roland CAMM-1-All cutters)

This 45° blade is used for cutting standard thickness materials. It is excellent for general purpose cutting of 2-3 mil adhesive backed substrates. Compatible with all Roland vinyl cutters and printer/cutters. This pack contains 5 vinyl cutter blades

Blades, Roland, 1 Pcs, 60 Dg.\.10 Offset Blade For Thick Materials (Roland CAMM-1-All Cutters)

This 60° blade is used for cutting thick materials. It is excellent for general purpose cutting of 4 mil and greater adhesive backed substrates. The Roland part number USA-C160-1 is compatible with all Roland vinyl cutters and printer/cutters. This item contains 1 vinyl cutter blade.

Blades, Roland, 3 Pack, 60 Dg.\.10 Offset Blade For Thick Materials (Roland CAMM-1-All Cutters)

This 60° blade is used for cutting thick materials. It is excellent for general purpose cutting of 4 mil and greater adhesive backed substrates. The Roland part number USA-C160-3 is compatible with all Roland vinyl cutters and printer/cutters. This item contains 3 vinyl cutter blades.

Panel Board 1 Right Side Bottom EGX-20, Button Control (#34 Image)

Panel Board 2 Right Side EGX-20, Knob Adj. Control (#33 Image)

Board, XY Board Assy, EGX400/600

PCB, Trans Board 1 LF EGX600 Assy (Schematic Part# 52)

Board, XZ Board Ass’y, EGX400/600 (W589356070)

MMC Board, Assy., EGX400/600 (Control Panel Connector PCB-Front of Machine)

Main Board for Roland SV-12 & SV 8 Vinyl Cutter Stika