Control Panel, EGX 350-Handy Panel (July 2022, DISCONTINUED PART)

Filter, Water Filter, Activated Carbon for Roland EGX360

Tray, Water Tray Cleaner Box for Roland EGX360

Motor, Z-axis Motor For Roland EGX30a

Compressor for Air Assist, 115Vac-Low Volume, 58PSI

Low volume Air Compressor for laser engravers; help eliminate the harmful and damaging side effects of moisture on the laser optics. Also, provides the optimal air pressure your laser needs to blow away vaporized particles and helps prevents overheating. A must to keep lenses and mirrors clean to promote longer laser life. Recommended for LOW production enviroments where laser will be operating less than four (4) hours.

Belt, Meistergram\HSquare Spindle, 18.75" LG, 1/8" Dia. (1612, 2412, 2818-2 Belt System)
Buy Qty of 2 for $35

Belt, Meistergram\HSquare Spindle, 23" LG, 1/8" Dia. (912, PA912, 1912, 2818 Stepper)

Buy Qty of 2 for $35

Belt, Meistergram\HSquare Spindle, 5.75" LG, (2818-2 Belt System)

Bearing, Z-Axis-Bottom Leadscrew, Ball, .250ID, .625OD, .69 Flange Each (All Meistergram \ HSquare Machines) Sold as Kit of 2 for $48.00

Nut, Leadscrew, 1/4P, 3S Anti-backlash, 2Pc's (PA912XY  & 912S XY-axis, Requires Rental Special Nut TOOL to remove and Install, rental fee $25)

Nut, Leadscrew, 1/4P, 2S Anti-backlash, New Syle Nut One pc, 2" L, Triangle-Black (1912XY, 1612XY, 2412XY, 2818XY)
* Previous\original nut was 2 piece Orange, this is no longer available.

Coupler, Steel, Z-Axis, 2412S, .312 ID, .25 ID, .75 OD, .90 LG

MCB, Roland DGA Main Mother Board for EGX400/600 Engraver (#19, 7589350000)

Board, Spindle Board Assy, EGX400/600
(Schematic Part # 20)

Kit Notes:

Connection Kit, Transparent Hood 420mm x 320 mm  for 120197 Arm  

Machine Model:  650 Fume Extractor

Export Notes: HTS Code: 3917.39.0010, Made in the UK-England

Cascade, in-line filter for 400i/800i comes with 100186 (100mm) connection kit, includes filter 111107 ~F7 (Reusable) or 111117 F8/F9 (Single use).

Note: The Cascade Box is fitted with a silicone vacuum sensing tube. The tube should be connected to the inlet on all vacuum machines. It should not be connected to volume machines.

Length: 430mm, Width: 430mm, Height: 1063mm, Weight: 30Kg
DIM's: Box on a Pallet  95Lbs\35Kg, 25"x25"x51" (66x66x130cm)

MUST ship Truck Freight

A2033 Satin, Anodized Black Aluminum 12" X 24" .025" Sheet (1pc)

Quatro, Blower Motor CSA-626 I-Series
Infiniti Blower Retro Kit 120V c/w Gasket & Bracket Replaces AB001
**Future replacements, Purchase AR175 motor only**.
HTS#: 8421.39.8015, Origin: MEX