For: GCC Puma III

29004692G- Control panel Assembly for Puma III

Mirror 4, 1" Dia, Carriage Mirror Rev.2 for SGX/C180/GLS/SGLSHYB-Co2/SLS, SI/SGE > After SN: I50790, Mercuy III, MG380Hybrid, X252, X380 SN After SN U90xxx/T90xxx, Venus II SN start from T5619
Base Dims: 1.1" x 1.3" (28x33mm)

Lens, 4" FD for Spirit Models

Machine Model: Spirit Si \ SGE-After I50790, SGX, SGLS, SLS, C180-I & II  with .012" Spot Size, Rev. 2 

GCC Lens, 2" FD-Blue Rev. 2, Std Co2 Model Lasers (Not Fiber Hybrids)

Co2 Machine Models: Spirit SGX / SLS / SGLS / SGLSHYB-Co2 / C180-I / C180-II (Spirit Si/SGE machines with SN: After I50790+), Dim's: W=1.1"(28mm) x H=1" (25mm)

(Same as 29004737G)

GCC Machine Models:

Spirit Si\SGE\SGX\SLS\SGLS\C180-I & II (For machines with SN: After I50790+) 

Mercury III, MG380Hybrid, X252, X380 (For machines with SN: After U90xxx/T90xxx+)

For Spirit GX & Spirit GLS with Serial # Before: N52181

GCC-29004998G Lens, 2.5" FD-Gold

Machine Models:  Spirit  (SI, SGE, SGX, C180) with .007" Spot Size, Rev.2

(Without Focus Tool # LGCC-29002606.0 $26, Mach. After SN: I50790)

Board Notes: DC 12VC PCB for Laser Tube Fans

Machine Models: Spirit /Gaia/X500

Roller, DU Roller Assembly-Top X-axis EACH (Gaia, X500-I)

PCB, Auto Focus PCB, For Flat Cable, Rev. 2, After SN: N95617 (SLS\SGLS\C180-II, Mercury III, X380, X252)

Motor, Z-axis, Assembly (C180-I & II)

MCB, GCC Main Mother Board (Mercury II, New MCB) 6 Month Warranty
* eMail and ask if a Refurbished MCB is available, click here.

29005210G  Carrier guide roller  Assembly For Puma I-III  (DU type) 

GCC-29005238G Rail, X-axis Linear Guide (S290)  with Rail, belt, lens carriage

 Includes:

22800923G, X-axis slideway
22800928G, Tension pulley shaft
29002533G, Tension idle pulley Assy
20700053G, Bearing (687ZZ)
29002539G, X-axis transmit shaft Assy
290105180G, XY Motor Assembly
20600076G, X motor belt (2GT-T90-10)
29002540G, X-axis Transmission pulley Assy
20600074G, X-axis Open Belt (2GT*T895*W12)
29005888G, Lens carriage Assembly
23300310G, X Tube Chain
20901519G, Flat cable 1.0mm 8pin(1220mm)
29002601G,Air Assist Tube 1100mm
290101080G, X Motor PCB, 5A
20901688G, PCB TO AUTO FOCUS CABLE

29005256G - Watch Dog-Interface Converter Board Assembly, Jaguar II/III/IV (no watch dog for J5 series)

The Watchdog is usually located on the side of the machine, where the white ribbon cable connects, the control panel and motor run through it.

Panel, Control Panel Board Assembly (LMC-STC2A20DRG-011)
For: Jaguar II,III,IV/Pume II, III/VOGUE/Expert Pro

29005344G -GCC  Watch dog board Assembly for Puma III

GCC-Coverlid, Top Green PV Lid for S290 Fiber Laser 780-1400nm (Window ONLY- NO hinges)

Sensor, AAS II Sensor Assembly w/Bracket for Puma III