The LaserPro X series offers an economical alternative for laser cutting and engraving. The LaserPro X380 series is equipped with dependable sealed CO2 laser which offers a reliable source of 100W of power for mass production requirements. The X380LS mode

Blade Holder, Adjustable Tip, Regular 
XD-CH3 (Ceramic, Standard)

Roland, Blade Holder, Adjustable Tip, Alloy, Blue

Kit, Lens Cleaning Kit For Laser Optics & Lub. (Includes Optics Cleaning Paper 50/pck, 100% Cotton Swabs 100/pck, Lens Cleaning Solution 1.25oz) and  DS-ES 1.75 oz Teflon Lubricant for Engraving Machines (Laser, Z-Axis Table Leadscrews)

Vacuum Adapter For Roland EGX400\600, ZAD-600
This Vacuum Adapter (Product #ZAD-600) is to connect the machine to the hose of the vacuum. This item is included in the Chip Extraction System (US-CHIPSYS-C). This adapter is for use with the EGX-400/600 engravers.

Collet, 1/8", ZC-23-3 Solid Split Bottom Load Collet 3mm (.125") For: DE-3, EGX300/EGX350/EGX400/EGX600

This 3mm Collet (Product #ZC-23-3) is for use with bottom loading end mills. It is compatible with the following Roland devices: JWX-10, EGX-300/400/600, MDX-40, and SRM-10.

Collet, Split, Top Load Collet 3.175mm PNC2300A (1,8") For: EGX300/ EGX350/EGX360

This 3.175mm Collet (Product #ZC-23-3175) is for use with bottom loading end mills. It is compatible with the following Roland devices: JWX-10, EGX-300/400/600, MDX-40, and SRM-10.

Collet, 6mm for EGX-300/EGX350/EGX400/EGX600600, JWX-10, MDX-40

This 6mm Collet (Product #ZC-23-6) is for use with bottom loading end mills. It is compatible with the following Roland devices: JWX-10, EGX-300/400/600, MDX-40, and SRM-10.

Collet, 1/4"(6.35mm) for: Roland DGA EGX350/EGX400/EGX600, MDX-40, SRM-10, JXW-10
This 6.35mm Collet (Product #ZC-23-635) is for use with bottom loading end mills. It is compatible with the following Roland DGA devices: JWX-10, EGX-300/400/600, MDX-40, and SRM-10.

Collet, 11/64", ZC-E436 Solid Bottom Load Collet (.171") For EGX300\EGX350\PNC-2300A\EGX400\600, Burnishing - Diamond Guide

This Bottom Loading Burnished Guide (Product #ZC-E436) is intended for use with the Roland EGX-Series engravers. The guide is designed for diamond drag applications and must be used with diamond engraving burnishing tools.

Spindle, Roland EGX20, 1/8" Assy. (90 Day Warranty)

Spindle, Roland EGX350, 1164" Assy. with Belt 
Note: After you replace the spindle, you need to run it without any load with no tool or Collet installed for approximately 20 minutes. (90 Day Warranty)

Spindle, Roland EGX400/600, 1164" Assy. w/o Collet or Micrometer (90 Day Warranty)

Note: After you replace the spindle, you need to run it without any load with no tool or collet installed for approximately 20 minutes at 15000-RPM

This T-Slot Table (Product # ZTT-35) is an optional accessory for use with third party vises and fixture. This table is compatible with the EGX-350 an DE3

Table, Vacuum Table (Product # ZV-23A) is an optional accessory for use with the Chip Extraction System (Product #US-CHIPSYS-C). This table is used as an alternative to adhesive sheets for holding down flat plastic material and is compatible with the EGX-350 engraver

Instructions

Vise, Machine Center Vise (PNC-2300/EGX-300/EGX-350)