Diamond-Burnisher 4 Facet, .015 Tip, 11/64" Dia. x 7" LG

Rotary Tools – Cutters Brochure Specs

Bearing Assy. EGX30, EGX30a or CS-20, (3-Pack)

Two (2) Plastic Flags
Machine Model: Venus Laser

Cone Set, Rotary Adaptors (5) for GCC Laser, Includes Rotary Cones:
1-Rotary Flange Adapter 6mm, Metal $150
1-Rotary Cone 2.18od x 1.87od, Blue $55
1-Rotary Cone 2.50od x 2.12od, Red $55
1-Rotary Cone 2.95od x 2.44od, Maroon $55
1-Rotary Cone 3.50od x 3.00od,White $55
1-Rotary Cone 4.00od x 3.25od, Orange $55

Models: C180-I & II, X-380, Mercury II, X252 Lasers & Puma, Bengal, BobCat, ExpertPro Cutters

Cutter, Parallel, .060 Tip, 1/8" Dia. x 5" LG For Roland Engravers
(PAR-125-060K, ZEC-A2150 \ 1.52mm Tip, 3.175mm Dia., 114mm L, CBR1254.B2)

Rotary Tools – Cutters Brochure Specs

Cutter, Parallel, .125" Tip, 1/8" Dia. x 4.5" LG (ZEC-A2320 \ 3.175mm Tip, 3.175mm Dia., 114mm L)

Rotary Tools – Cutters Brochure Specs

Cutter, Parallel, .060 Tip, 11/64" Dia. x 6.5" LG, PAR-171-060K

Cutter, Parallel, .171 Tip, 11/64 Dia. x 6.5 inches

Rotary Tools – Cutters Brochure Specs 

Spindle, Meistergram\HSquare 912S\PA912  11/64" Assy., 1 Pulley

Spindle, Meistergram\HSquare 1912\2412\2818, 11/64" Assy., 3 Pulley

Spindle, Meistergram\HSquare 2818S,  1/4" Assy., 3 Pulley

Kit, Rubber Stamp Sample Kit

The Rubber Stamp Sample Kit includes:

• - (2) RUS 001 - Low Odor Laser Rubber
• - (4) RCH 005 - Self-Inking Stamp Maxum 2 - Black
• - (4) RCH 006 - Self-Inking Stamp Maxum 3 - Black

Vacuum, Chip Extraction Sys. UltraQuiet, 1/2hp w/accumulator

Key Features

• This chip removal system is quiet and efficient to use in any shop.
• The vacuum not only keeps your works space clear of debris, but it also filters 99.99% of dust out of the air!
• The systems are also self-contained so it can be used to reclaim precious metals.
• The vacuum hose supplied slips onto the vacuum connection on top of the unit and the other end connects to the collection device desired.
• The ideal location for the US-CHIPSYS-C is under the bench where the user works.

US-CHIPSYS-C Specifications

• Usage: Single station use for collecting dust at 1.5” diameter workstation
• Speeds: Single Speed
• Size: 14.Lx10.Wx12.H
• Power Requirement: 115 VAC 5A
• Overload Protection: Resettable circuit breaker included.
• Sound rating: 53db on High
• Dust Collection: Collects 99.99% of all dust (filter rated at 95% @ 1 micron)
• Motor Rating: High-Performance ½ Horsepower Motor

Bag, Vacuum Filter Bag (3-pk) for Chip Removal System
Filter bag (3-pk) for chip removal system
PRODUCT NUMBER: US-FLTRBAG-A3
This product #US-LN10 is a set of 3 replacement filter bags for the Chip Extraction System (Product #US-CHIPSYS-C). The Chip Extraction System is used with EGX-20/30/30A, EGC-350/360, EGX-400/600 and DE-3 engravers.

Kit, Starter Kit Cutters 1/8" for Roland Engravers (EGX20, EGX30A & EGX300, EGX350, DE-3)
Includes: .010", .015", .030", Diamond Tip, Holder-Cutter
* Manufacturer reserves the right to change certain items on this cutter kit USTL125KIT

Pre filter cyclone for dust collectors

Acts as a dust separator and pre filter cyclone that pushes debris and dust to the bottom container

Features:

• Easily Integrates Into Any Dust Collection System
• 5 Gallon Removable Debris Capture Bucket
• Highly Durable Molded Resin Design
• Scientifically Tested and Proven to Separate Dust
  • A 3M/Georgia Tech Study
• Up To 97% Cyclonic Separation Rate of Particles Down to .3 Microns
• 95% Effective at Precious Metal Reclamation
• Inlet/Outlet Ports – OD: 4″- ID: 3.75″

Bag, Vacuum Filter Bag (5-pk) for Chip Removal System
Filter bag (5-pk) for chip removal system
PRODUCT NUMBER: US-FLTRBAG-A5
This product #US-LN10 is a set of 5 replacement filter bags for the Chip Extraction System (Product #US-CHIPSYS-C). The Chip Extraction System is used with EGX-20/30A, EGC-350/360 and EGX-400/600 engravers.

MCB, Roland DGA Main Mother Board-New for EGX20 Engraver