X

There are currently no items in your shopping cart.
MultiMat, SEKLEMA Engraving Table Hold Down MAT, 12"x24" Double Sided
MultiMat, SEKLEMA Engraving Table Hold Down MAT, 12"x24" Double Sided
Seller: ( 0 ) Jorlink
Feedback: There are currently no ratings.
12/17/2013
MMAT1224.WD
1 lbs
$180.00
Our Sale Price: $170.00
You save: $10.00 (5.56%)

MultiMat, SEKLEMA Engraving Table Hold Down MAT, 12"x24" (30.5x61cm) Double Sided

Consider the drastic reduction of the consumption cost of 2-sided tape, at $7.50 a roll, how much are you using now, how much would you save?

But the real savings is in productivity. Here is where your savings really add up! If you run your engraving system at an hourly rate of $60 and can trim just 5 minutes per hour by placing your plates in a couple of seconds and by not having to apply engravers tape every few plates, you are saving $3.00 every hour.

  • Counting every hour, and every day and every week (assuming a 40 hour work week) your labor savings can reach or exceed $6,240.00 a year!
  • MultiMat is easy to use simply place it on your engraving table, then place you material and engrave.
  • MultiMat lasts long, simply keep it clean and the tack will last and last. A little water and a lint free cloth every few jobs and you will have MultiMat for months and months and months.
  • MultiMat holds most any flat surface material or object, place it and engrave it!
  • Use MutliMat on your Laser, materials that are bowed or uneven can be held flat for the laser process assuring your focus point is uniform across your workarea.
  • We cut MultiMat to size, we recognize the diversity of engraving projects and offer MultiMat with a flat Square Inch price and will cut to size.

How long will Multi-Mat/Seklema Last?
The life span of Multi-Mat/Seklema depends on many factors , including type of use,( IE: engraving, profiling through material, or laser hold down), proper cleaning and handling . The average user can expect many months or even years of use. One great Multi-Mat/Seklema advantage is that it is double sided, thereby providing double the life span when compared to other single sided products.

What is the cleaning procedure for Multi-Mat/Seklema?
Cleaning Multi-Mat/Seklema is simple and easy. Merely use a soft sponge and running water to remove chips, dust or dirt, and then allow to dry. No chemicals cleaners are required.

How is Multi-Mat/Seklema affixed to the engraving table, and can it be removed?
Because Multi-Mat/Seklema is double sided, it holds itself to the engraving table top. No double stick tapes, vacuums, or clamps are necessary, and Multi-Mat/Seklema can be easily removed and stored, then reinstalled by placing it in position and gently pressing down. No other hold down system is so fast and easy to use.

Is there any clean up required after using Multi-Mat/Seklema?
For most situations the answer is no, however Multi-Mat/Seklema does leave a slight oily residue on some engraving plates. If you wish to use double stick tape as a plate mounting system, this residue can be easily removed with cloth and rubbing alcohol, or the double stick tape can be applied to the plate before engraving, and then used with Multi-Mat/Seklema.

What happens if I cut through the engraving material into Multi-Mat/Seklema, is it ruined ?
Multi-Mat/Seklema has a self healing feature. Small cuts in the surface of Multi-Mat/Seklema should not cause problem, and seem to heal themselves. Of course continued cuts over a long period of time will degrade the effectiveness of Multi-Mat/Seklema. Many small enclosed cuts ( closed path such as a series of circles, or squares ) could cause sections of the mat to come out which of course would degrade its performance.

Multi-Mat/Seklemaseems expensive, how can I justify paying that much?
Although Multi-Mat/Seklema will wear out eventually, it is not really a consumable item like double stick hold down tape or labor. Multi-Mat/Seklema makes life a lot easier for the engraver, and will pay itself very quickly in time saved and ease of use. When the cost of double stick hold down tape, along with the associated time and labor needed for application and removal is figured in, Multi-Mat/Seklema becomes even more cost effective.


Make Your Purchase More Productive

 With A Support Plan

Tube, Laser Tube, 100w Laser Glass Tube Yongli 100w Y-Type for GCC Laser Model: X380
LGCC-290113970G
$1,800.00
11183
Lens, 4" FD, Std For Spirit Models: Hybrid CO2+Fiber Lasers, Spot Size: .012"
LGCC-290096960G
$1,795.00
11055
Lens, 2" FD, Std For Spirit Models: Hybrid CO2+Fiber Lasers, Spot Size: .005"
LGCC-290096950G
$1,795.00
11053
Lens, 3" FD, Std For Spirit Models: Hybrid CO2+Fiber Lasers, Spot Size: .008"
LGCC-290097290G
$1,795.00
11054
890180 Cascade, In-Line Filter for 400i/800i
MPEA-890180
$1,728.00
332
R2600118X.20-BK
$1,725.00
359
Coverlid, Top Green PV Lid for GCC S290 Fiber Laser 780-1400nm (Window ONLY- NO hinges)
LGCC-29005349G
$1,695.00
10683
FumeCube Max 120V Basic (No arms)
MPE-072116
$1,681.00
10959
Rail, X-axis Linear Guide for service (Spirit GE)
LGCC-290086690G
$1,625.40
11050
PC Lenovo ThinkCentre M93p Tiny Desktop with 23" Monitor & 3yr Warranty
PCM93
$1,616.84
1036
Filter 110633, Purex Main Filter - HEPA Only
MPEF-110633
$1,614.00
678
Quatro, AG129 (Type F128, Yellow) Pre-Filter Section Bag, Pack of 50
QFAG129-50
$1,595.00
10754
FumeCube Dual Port, 2- Lighted Arm, 120 v.
MPE-072095-2L
$1,542.00
10471
Cutting Plotter , GCC Puma IV 24" (FREE SHIPPING)
MGCCV-PIISP-60
$1,500.00
3
CADlink, SignLab 10 Print & Cut Software (Site License, 2nd or More)
SCAD-SL10SPCUT2LIC
$1,497.00
6134
MCB, GCC Main Mother Board Spirit Si from 5206E to 5272
LGCC-290084430G
$1,495.00
10943
MCB, GCC Main Mother Board Spirit LS from 5206E to 5272
LGCC-290090410G
$1,495.00
10944
MCB, GCC Main Mother Board from 5206E to 5272 (X252RX) Upgrade kit
LGCC-290089880G
$1,495.00
10947
MCB, GCC Main Mother Board from 5206E to 5272 for MIII Models
LGCC-290084310G
$1,495.00
10948
MCB, GCC Main Mother Board from 5206E to 5272 (For: C180-II 12w)
LGCC-290084320G
$1,495.00
10950
MCB, GCC Main Mother Board from 5206E to 5272
LGCC-290089870G
$1,495.00
10953
MCB, GCC Main Mother Board from 5206E to 5272 (For: C180-II 30/40w)
LGCC-290084330G
$1,495.00
10949
MCB, GCC Main Mother Board from 5206E to 5272
LGCC-290084350G
$1,495.00
10956
MCB, GCC Main Mother Board from 5206E to 5272
LGCC-290090400G
$1,495.00
10955
Rail, X-axis Complete Assy. for Mercury III 25~60w with motor, belts, pulleys
LGCC-290121640G
$1,495.00
11047
Rail, X-axis Linear Guide with Bearing Block ONLY (Spirit SGLS)
LGCC-290070710G
$1,495.00
1033
Cover-Lid, Top Green PV, Lid for Spirit, GLS Laser, CO2/ Fiber Hybrid
LGCC-290096900G
$1,495.00
10635
Rail, X-axis Assembly with Motor for C180-II
LGCC-290076240G
$1,495.00
11105
MCB, GCC Main Mother Board Spirit SGLS from 5206E to 5272
LGCC-290090390G
$1,495.00
10945
Rail, X-axis Linear Guide (Spirit LS/S290 LS)
LGCC-290070721G
$1,495.00
8225
Power Supply, Laser Tube PS RSP-2400-48 2400W 48V/50A ( for Ti100, SN after K51416) , S400 80GT-120GT
LGCC-245001050G
$1,495.00
11161
MCB, GCC Main Mother Board from 5206E to 5272
LGCC-290084360G
$1,495.00
10946
Board, Purex PCB
MPEA-400046
$1,494.90
10859
Purex, FumeCube 120vac, W/ 2 Arms
MPE-072095-2
$1,427.00
1031
Filter 110632, Purex Main Filter HEPA/Chemical Cleanroom
MPEF-110632
$1,374.00
509
Filter 110615, Purex Main HEPA/Chemical Std.
MPEF-110615
$1,364.00
676
Filter 110624, Purex Main Filter - Chemical
MPEF-110624
$1,364.00
10491
Filter 110627, Purex Main Filter - Chemical Only
MPEF-110627
$1,364.00
677
MCB, Roland Main Board for EGX350\EGX360 Engraver
RR6700632010
$1,350.00
6155
Engraving Accessories Starter Kit for EGX-300
RR-EGX300-KIT
$1,350.00
929
FumeCube with Lighted Arm,120V
MPE-072067-1L
$1,321.00
1032
R6000101X.0-BK
$1,295.00
467
Blower Motor, 230v, Purex Pump 300651
MPEA-300651
$1,287.00
10682
FumeCube Single,1 Arm, 120 V
MPE-072067-1
$1,273.00
504
Board, 5272v3 mainboard + driver board assembly (service only) for E200
LGCC-290123290G
$1,272.50
11083
Ring Chuck for EGX-360
RR-ZRC-36
$1,249.99
956
Power Supply, Laser Tube PS, 30vdc (Synrad T-series T60, T100 for Gaia/Explorer/SGX, Machines After Serial # J50682)
LGCC-24500041G
$1,226.00
7153
FumeBuster High Volume 120V
MPE-70363.120
$1,223.00
706
FumeBuster 230V
MPE-70362
$1,223.00
10475
Expert II LX, 52 inch
MGEX II-52LX
$1,220.00
8199

 

If you need any assitance: 336-288-1613 
Email: sales@jorlink.com

FRAUD ALERT NOTICE

  1. Direct Delivery Only Service (Packages can NOT be redirected)
  2. Signature Required Deliveries (Adult I.D. and signature will be required)
  3. Jorlink will be calling to confirm new orders and ask additional information.

 

Secure Checkout

 

NOTE: Thank you for your order.  Orders will normally be shipped within 24-hours or less. 
RUSH orders will be shipped the same day if placed before 2pm EST and if in-stock.

If your equipment is down, please let us know as we will do our best to get you the product ASAP.

Read\Click Here for DAMAGE CLAIM POLICY 

  UPS Delivery Times from NC Zip Code 27407-Click Her for UPS Ground Delivery Link

 

 

TAX- The States in red require sales tax  for Roland Drop Shipped orders.  
Those charges will not be reflected in the checkout area however you will be contacted for payment of those charges. 
(CA, CO, FL, GA, IL, MA, MI, NJ, NY, PA, TN, TX, WA, WI, MN)
Our Checkout System Has Been Updated to Serve You Better
For personal assistance please use our contact form or call us at: (336)288-1613


 
 

 

 

 

Jorlink USA, Inc,
3714 Alliance Dr., Suite 100
Greensboro, NC 27407
TEL: (336) 288-1613
eMail: sales@jorlink.com

M-F 9am-5pm EST 
Facebook Linkedin twitter Instagram YouTube
Jorlink USA, Inc. BBB Business Review