GCC Spirit SI Parts

Pulley, Y-Axis Tension Idle Pulley Assy. for Spirit Si\SLS\SGLS\SGE, BK01834A

Pulley, Z-axis Idle Pulley For: Mercury, X252, Spirit

Pulley, Z-axis Lead Screw Pulley For: Mercury, X252, Explorer (LH01312)

Rail, X-axis Linear Guide (Spirit Si, S290), ​Includes: 

RAM, Chip, 32MB Memory, SIMM, 72-Pin, (Explorer/Spirit)

Relay, Solid State Relays (Pkg 2, KSD215AC3) For: Spirit Si\SGE\GLS\GX\LS\S290\X500\GAIA-AII
* May require soldering on some model machines

For: C180-II\Spirit Models, Pack of 2 (X-axis Bottom, BK01836A)

Rotary Attachment for Mercury, Explorer or Spirit Si\LS\SGX\SGE\ X-Series Lasers

WORKPIECE LIMITATIONS:

Max. Length: 450 mm (17.71 inches) for 29001051G 
Max. Loading Weight: 7 kg (15 lbs.) 
Minimum Diameter (Small conical fixture) 12 mm (0.5 inches)
Maximum Diameter (Small conical fixture) 50 mm (1.9 inches)
Minimum Diameter (Large conical fixture) 90 mm (3.5 inches)
Maximum Diameter (Large conical fixture) 120 mm (4.7 inches)

Rotary Attachment-Chuck for S400, Spirit, SLS, SGLS, SGLS-HYB, S290 Laser System
Features: (1) Tilt up to 45 deg. to mark the inner side of the ring (2) max. diameter: 86mm & max. length: 400mm without tilt

Specification information:
Maximum Length: 1000 mm (39.2")
Maximum Loading Weight: 4 kg (8.8 lbs.)
Minimum Diameter: 0.5 mm (0.02 inches)
Maximum Diameter: 120 mm (4.7 inches)

Cutting & Engraving Video

S290 Rotary Attachment Video

Rotary Pad Tray for Flat Flange on Rotary Attachment (All Mach)

LGCC-22800914G – Screw, Mirror screw with O-Ring (24700044G)

Screw, Seat-Auto Focus Screws (Qty 2, M2*3L)

Screw, Thumb Plastic Screw for Carriage\Lens Assy (Cover, Optics)

Seat, Auto Focus Seat Assembly, Spirit\C180 Model

Sensor, PCB Board, X-axis Motor,  For Spirit GE/Spirit Si before K50319, Spirit LS BEFORE K50114 (MCB-5206 Parallel, Braided AF Cable, PCB-Marking 23800142G)
* Note: MCB-5206 will have a Parallel Connection Input

Sensor, PCB Board, X-axis Motor, For Spirit Si\SGE\LS\GLS (4-Amp, MCB-5206, Replaces 29005107G & 29002511G, 23800226G Rev. 2-2017), Flat Ribbon Cable, AAS I
* Note: MCB-5206 will have a Parallel Connection Input

Sensor, PCB, Rotary Attachment Sensor PCB

For Spirit Si, SGE, SGX

SmartBox Cutting Assy w/HoneyComb Table, Cutting Box & Supporting Pieces (Spirit Si\SLS\S290 Laser Models, Use Only w/2" Lens)

SIZE:130mm (Height) 780mm (length) 510mm (width)

Sprinkler, Flame Sprinkler System for: Spirit  Si, SLS, SGLSHYB, Mercury (MSRP $714)
Laser cutting and engraving operations using the flame sprinkler system protects the operator, machine, and the work products from potential fire hazards. During the engraving process, flaming may occur when working with combustible or easily-flammable materials, such as paper or wood. The flame sprinkler system is an optional item that automatically ejects gas to extinguish flames when they reach 68°C/155°F moments after the onset of the fire.

Response element and temperature: Fusible alloy@68°C (155°F)
Working pressure range: 0.1-1.2Mpa
Bulked coupling: 1/2” PT
Recommended Gas: CO2/N2/Dry Powder

Sticker, Control Panel Sticker, (Spirit Models, Venus II, Mercury III, X380, X252)

Swabs, Cotton Tip Applicators, 6" For Laser Optics (100/pck, GCC# 26500193)

Switch, Emergency Switch (ALL GCC Models)

Switch, Laser On\Off Rotating Safety Key Switch (All GCC Machines)

Switch, Limit Lever, Z Axis Down, All LaserPro Machines (SW00010A)

For: Spirit\Mercury\Venus II\X252\X380\MG380HYB

For Models: Mercury/Explorer/Venus/Spirit Si\SGE\SGX\SLS\SGLS\C180)

Table, Surface Platform for Spirit LS, Si, S290

Tool, 1.5" & 2.0" Focus Tool, Pin Spirit/SGX/C180/S290/X380/X252/Mercury-I, II, III (Auto Focus Assy)

* Mercury-I Old Pin Style Phase Out (22800146G), this is the new replacement.

Tool, 2.5" Focus Tool Pin Gold Spirit/SGX/C180/S290/X380/X252/Mercury I,II, III (Auto Focus Assy)

Tool, 4.0" or 3" Focus Tool, Pin Spirit/SGX/X252 (Auto Focus Assy)

Tool, Belt Tension Check Fixture (Service- XY Small Belt) For GCC Models: Spirit's / Mercury  / X-Series / S400 / C180II

Tubing, Air Assist Plastic Air Hose
For All GCC Laser Engraving Machines (50"+ \ 1250mm)

Valve, Airflow for Air Compressor (All Machines)

Wheel, Caster 2.5" PU Stand Roller Wheel, Spirit Machines (#56)

Wheel, Caster 2.5" PU Stand Roller Wheel with Brake for Spirit Machines (#57)

For: Spirit Si, SGE (LH01830A)

For: Spirit SI\SLS\SGE (LH01828A)

* One Pulley on right side of X-axis Rail

For: Spirit Si\SLS (LH0183A)
* Two Pulley on back side of Y-axis Rail

Window Cylinders-Each, Top Door (Glass Window), Spirit Si, SLS, Mercury, X252, Shock Lift (15" L, 8Kg), After 2017 Built

Window Cylinders-Each, Top Door (PC\Acrylic Window), Explorer, Mercury, Spirit Si, SLS, SGE, Shock Lift (11" L, 5Kg)