GCC Venus I Parts

Flash ROM, EEPROMs SET with Odd\Even Chips (Mercury, Venus, J,L,JU)
* Firmware may be required to be loaded to EPROM by client.  Jorlink will offer this service if we have an identical machine at a cost of $90 + part.  Otherwise, client can loaded with our assistance over the phone\on-line at our hourly support rates, click here to order your support session.  

Front Panel, Board, DM/SM Controller

Gear, Pulley, Gear EGX30a & EGX30, Y-Drive (FD31.1558 +GEAR S190 CS-20, 30mm OD-Metal & 58mm OD Plastic White-Gear)

Gear, Pulley, X-Drive EGX30, EGX300/PNC-2100A/300 CS-20 EGX-30A

Holder Dia-Cutter, Diamond Scraper Adapter (CS-20, EGX30, EGX30a)

Honeycomb \ Vector Cutting Table 1/2" Squares, Mercury, X252 Aluminum Grid Plate Style

The aluminum grid cutting table is an ideal pal for laser cutting. It lifts the work piece off the work table from hitting by laser reflection while supports it with reinforced aluminum grid design. The dust and vapor created during laser cutting are then taken away effectively through the grid by down vacuum exhaust (suggested using SmartBOX™ together). Rather than handling rigid materials, aluminum grid cutting table also helps to fix flexible materials with the aid of down vacuum SmartBOX™ to keep constant focus distance and consistent cutting result. A clean and better cutting quality is achieved from this technique.

Honeycomb \ Vector Cutting Table  for  S400 Aluminum Grid Plate Style

The aluminum grid cutting table is an ideal pal for laser cutting. It lifts the work piece off the work table from hitting by laser reflection while supports it with reinforced aluminum grid design. The dust and vapor created during laser cutting are then taken away effectively through the grid by down vacuum exhaust (suggested using SmartBOX™ together). Rather than handling rigid materials, aluminum grid cutting table also helps to fix flexible materials with the aid of down vacuum SmartBOX™ to keep constant focus distance and consistent cutting result. A clean and better cutting quality is achieved from this technique.

Honeycomb \ Vector Cutting Table  for T500-GAIA

The aluminum grid cutting table is an ideal pal for laser cutting. It lifts the work piece off the work table from hitting by laser reflection while supports it with reinforced aluminum grid design. The dust and vapor created during laser cutting are then taken away effectively through the grid by down vacuum exhaust (suggested using SmartBOX™ together). Rather than handling rigid materials, aluminum grid cutting table also helps to fix flexible materials with the aid of down vacuum SmartBOX™ to keep constant focus distance and consistent cutting result. A clean and better cutting quality is achieved from this technique.

Honeycomb \ Vector Cutting Table  for X500-II & X 500 III (Before serial Q96504)

The aluminum grid cutting table is an ideal pal for laser cutting. It lifts the work piece off the work table from hitting by laser reflection while supports it with reinforced aluminum grid design. The dust and vapor created during laser cutting are then taken away effectively through the grid by down vacuum exhaust (suggested using SmartBOX™ together). Rather than handling rigid materials, aluminum grid cutting table also helps to fix flexible materials with the aid of down vacuum SmartBOX™ to keep constant focus distance and consistent cutting result. A clean and better cutting quality is achieved from this technique.

Honeycomb \ Vector Cutting Table 1/2" Squares, Spirit GX\GLS\GLS-HYB, Aluminum Grid Plate Style

The aluminum grid cutting table is an ideal pal for laser cutting. It lifts the workpiece off the work table from hitting by laser reflection while supports it with reinforced aluminum grid design. The dust and vapor created during laser cutting are then taken away effectively through the grid by down vacuum exhaust (suggested using SmartBOX™ together). Rather than handling rigid materials, aluminum grid cutting table also helps to fix flexible materials with the aid of down vacuum SmartBOX™ to keep constant focus distance and consistent cutting result. A clean and better cutting quality is achieved from this technique.

Honeycomb \ Vector Cutting Table 1/2" Squares, Spirit Si/Spirit LS, S290 Aluminum Grid Plate Style

The aluminum grid cutting table is an ideal pal for laser cutting. It lifts the workpiece off the work table from hitting by laser reflection while supports it with reinforced aluminum grid design. The dust and vapor created during laser cutting are then taken away effectively through the grid by down vacuum exhaust (suggested using SmartBOX™ together). Rather than handling rigid materials, aluminum grid cutting table also helps to fix flexible materials with the aid of down vacuum SmartBOX™ to keep constant focus distance and consistent cutting result. A clean and better cutting quality is achieved from this technique.

Honeycomb \ Vector Cutting Table 1/2" Squares, X380, MG380, Aluminum Grid Plate Style

The aluminum grid cutting table is an ideal pal for laser cutting. It lifts the workpiece off the work table from hitting by laser reflection while supports it with reinforced aluminum grid design. The dust and vapor created during laser cutting are then taken away effectively through the grid by down vacuum exhaust (suggested using SmartBOX™ together). Rather than handling rigid materials, aluminum grid cutting table also helps to fix flexible materials with the aid of down vacuum SmartBOX™ to keep constant focus distance and consistent cutting result. A clean and better cutting quality is achieved from this technique.

Honeycomb Cutting Table, C180 I & II

Hose, 4" x 25' ft Ultra-Flexible Plastic-Clear Hose,  Self Grounding

Hose, 4" x 50' ft Ultra-Flexible Plastic-Clear Hose,  Self Grounding

Jumper Blocks, Qty 10 Micro Jumpers Caps Std Circuit Bd for Bypassing Door or Sensors for All Spirit machines

Kit, Rubber Stamp Sample Kit

The Rubber Stamp Sample Kit includes:

• - (2) RUS 001 - Low Odor Laser Rubber
• - (4) RCH 005 - Self-Inking Stamp Maxum 2 - Black
• - (4) RCH 006 - Self-Inking Stamp Maxum 3 - Black

Kit, Starter Kit Cutters 1/8" for Roland Engravers (EGX20, EGX30A & EGX300, EGX350, DE-3)
Includes: .010", .015", .030", Diamond Tip, Holder-Cutter
* Manufacturer reserves the right to change certain items on this cutter kit USTL125KIT

LGCC 29000246G Lens, Beam Splitter Optic

Machine Model:  Mercury III-Rev.1

Machine Model:  Spirit Models, Explorer, Mercury, S400

(Laser Tube GEM 30/50, T,V)

GCC-290069320G Lens, Dust Prevention Window Assembly

(Pen Carriage, SI, SLS, SGLS, C180I, C180II)

Lens, Dust Prevention Window Round Assembly for Co2 Laser Models: (MEIII, Si, SGX, SLS, SGLS, SGLSHYB-Co2, X380, MG380-HYB, Gaia, S400 for Co2 Only on 2nd Prism Mount)

Machine Model: Mercury I
Product Notes: Discontinued, Limited Availability, See Terms & Conditions

MCB, Roland DGA Main Mother Board-New for EGX20 Engraver

Motor, Replacement Motor – 97047 (Replaced Blue Dot # 97005 & 97038)
For: RRUSCHIPSYSC 

Motor, Rotary Attachment for: C180\Mercury\Explorer\Spirit Laser System
(Rotary Attachment 290010151G or 29005363G)

Motor, Servo Assy, X,Y, Z-axis 48V (DM2412, DM2818)

Motor, Stepper, 1.88 Amps, 6vdc, 1.8d, 1612-2412-WB2818  X-Y Axis (Same as R6009014 & R4610017, PH2610-01)

Machine Model: Spirit Si, SGE, S290, SLS and Y-Axis Motor for: Spirit GLS & SGX, Before SN: N52181

Machine Model: Spirit GLS After Serial N52181, Spirit LS,GLS Hybrid, LE (X motor)

RR22435425 Motor, XY Axis EGX400 / EGX600 24DCv

RR22435426 Motor, Z Axis EGX400 / EGX600, Roland Rotary

Mount, Y axis mount, Spirit Si / GX / S290 (BK01835A), Double Side Mount Assembly

Nut, Leadscrew, 1/4P, 2S, Anti-backlash, Flanged Mount, 2Pc's Nut, 2" L, Triangle-Orange (1912H2XY, 2818H2XY)

Nut, Leadscrew, Threaded, 1/2P, 4S (1612Z, 2412Z, WB2818Z, C2818Z, Servo Z)

Nut, Leadscrew, Z-axis 1/2P, 4S, Flange Mount (912Z, PA9Z, WB2818Z-Old)-New Style

O-ring, Rubber for Explorer Lens Optic (MZ01408)

PCB, DC & AC Fan Control Board Set (with fan), S290/Spirit/Spirit GLS/Spirit LS/GLS Hybrid , GCC 290095420G

PCB, Laser Control Wiring Board-Coherent, Venus\Mercury (BK013DWC)

PCB, Laser Control Wiring Board-Synrad, Venus\Mercury

PCB, USB & Ethernet Communication Connector Board for 5272v1 MCB

PCB, USB & Ethernet with FlashDrive Communication Board for 5272v2 MCB (All Mach. Except C180's)

Pin, Auto Focus Pin Assy. Spirit-All\S400\C180 Model, (Previous: BK01851 - 29002547G)

Plate For Rotary Attachment, w/o Pad (All Rotary Mach. Attachments)

Power Supply, Laser Tube PS, 27vdc (Synrad 12w & 25w, Mercury, Spirit, PSP-600-30GCN Meanwell)

For GCC Models: Spirit Si, SGX, SGE, C180-I & II-30w (Synrad, V30/V40 Before Machine Serial #: K50982)

Power Supply, Laser Tube PS, 30vdc, 1500w (Synrad T60 Tubes, Spirit Series, Before SN: J50682)
* Only One (1) PS required

Power Supply, Laser Tube PS, 48vdc (ASNER Series-ALS800-48C21, 12w & C30, Mercury (C30), Venus (48-series 12w & C30), Gaia, X500, Other Models w/DEOS Tubes, 110V-600W/220V-800W)

Power Supply, Power Board for MCB 5206e for C80I, 5 & 40vdc, 75W 12V/6.2A (LPS-75-12) with 3 Month

Black/Red- 5VDC
Black/Yellow- 40VDC

Models: C180-I & II, X-380, Mercury II, X252 Lasers & Puma, Bengal, BobCat, ExpertPro Cutters

Prism Mounts Assembly, SI/SGX/S290/E

Pulley Assy, X-axis Right Block Pulley Assy for Spirit LS, GLS, S290LS

Pulley, Tension Idle Pulley Assy. for C180-I (Left Side Rail)

Pulley, Tension Idle Pulley Assy. for C180-II (Left Side Rail)

* Color of Pulley may be metallic vs. black on certain C180-II models.

Pulley, X-axis Pulley P64-2GT (Venus)

Pulley, X-axis Pulley, P30-2GT-10-ABF (Venus)

Pulley, X-Axis Tension Idle Pulley Assy. for Spirit LS\SGLS (One Pulley on Left side of X-axis Rail)

Pulley, Y-Axis Tension Idle Pulley Assy. for Spirit Si\SLS\SGLS\SGE, BK01834A

RAM, Chip, 16MB Memory, DDRAM, 72-Pin (Mercury-1,Venus-1)

* As of Jan. 2019- this item has been DISCONTINUED, please email us as we have limited availability.

RAM, Chip, 32MB Memory, SIMM, 72-Pin, (Explorer/Spirit)

Ring, Nose-Guard for EGX30\EGX30A (CS-20)
* Previous Part #: 21515103 Replaced by  1000022641

Roller Assembly, T500 Y-axis Rollers

Rotary Attachment for GCC C180-I & II Laser

C180II’s rotary attachment.

Exchange the Conical Fixtures:

Depending on the shape of the workpiece, you can exchange different designs of front and back fixtures to fit the materials as below illustration.

Rotary Attachment for Mercury, Explorer or Spirit Si\LS\SGX\SGE\ X-Series Lasers

WORKPIECE LIMITATIONS:

Max. Length: 450 mm (17.71 inches) for 29001051G 
Max. Loading Weight: 7 kg (15 lbs.) 
Minimum Diameter (Small conical fixture) 12 mm (0.5 inches)
Maximum Diameter (Small conical fixture) 50 mm (1.9 inches)
Minimum Diameter (Large conical fixture) 90 mm (3.5 inches)
Maximum Diameter (Large conical fixture) 120 mm (4.7 inches)

Rotary Attachment For T500 with 45 Deg. Tilt,

Specification information:
Maximum Length: 1000 mm (39.2")
Maximum Loading Weight: 4 kg (8.8 lbs.)
Minimum Diameter: 0.5 mm (0.02 inches)
Maximum Diameter: 120 mm (4.7 inches)

Rotary Attachment For GCC: X500-III

Max Length: 1020mm (40inch)
Max Loading Weight: 4 kg (8.8 lbs.)
Min Diameter: 7 mm (0.27")
Max Diameter: 120 mm (4.33")

Allows the laser system to perform at another level! By using the rotary attachment, engraving on cylindrical or round objects is now possible. This option uses a fourth axis to rotate your object 360° to allow engraving on cups, wine glasses or even a baseball with two types of conical fixture available. The minimum inner/maximum outer diameter and length of the working object is 7 mm / 120 mm and 1020 mm respectively. Its maximum weight should not exceed 4kgs.

HTS#: 8466.93.5385

Rotary Attachment-Chuck for S400, Spirit, SLS, SGLS, SGLS-HYB, S290 Laser System
Features: (1) Tilt up to 45 deg. to mark the inner side of the ring (2) max. diameter: 86mm & max. length: 400mm without tilt

Specification information:
Maximum Length: 1000 mm (39.2")
Maximum Loading Weight: 4 kg (8.8 lbs.)
Minimum Diameter: 0.5 mm (0.02 inches)
Maximum Diameter: 120 mm (4.7 inches)

Cutting & Engraving Video

S290 Rotary Attachment Video

Rotary Pad Tray for Flat Flange on Rotary Attachment (All Mach)

Screw, Plastic for Auto Focus Pin M4 (Venus, Mercury)

Seat, Auto Focus Seat Assembly, Spirit\C180 Model

Sensor, PCB Assy, Home Switch X-Y Axis for Meistergram\H2 Servo

Sensor, PCB Board, X-axis Motor, For: Spirit LS\GLS\GLSHYB\S400 (5-Amp, New MCB-5272-v2 Red), Flat Ribbon Cable
* Note: MCB-5272 will have a USB & Ethernet Connection Input
** Replaces Old Part #: 290090950G & 23800226G

Sensor, PCB X axis Motor Board w/Sensors (Spirit SGX)

* For MCB ver. 5206 w/Parallel Cable Connection

Shaft, Transmit Shaft X-axis (C180-I)

Shaft, Transmit Shaft X-axis (C180-II)

For Spirit Si, SGE, SGX

Shaft, X-Axis Transmit Shaft (Spirit LS, GLS, GLS-HYB)

Shaft, Y-axis Pulley Assy. (Mercury)

SmartBox Cutting Assy w/HoneyComb Table, Cutting Box & Supporting Pieces (Spirit Si\SLS\S290 Laser Models, Use Only w/2" Lens)

SIZE:130mm (Height) 780mm (length) 510mm (width)

Spindle, Meistergram\HSquare 1912\2412\2818, 11/64" Assy., 3 Pulley

Spindle, Meistergram\HSquare 2818S,  1/4" Assy., 3 Pulley

Spindle, Meistergram\HSquare 912S\PA912  11/64" Assy., 1 Pulley

DISCONTINUED - Sticker, Control Panel Sticker (Venus I, Jupiter)

Sticker, Control Panel Sticker, (Mercury 1)

Strip, GS-24 Cutter Protection Pad (Previous Part #: 1000012516)

Strip, GX-24 Cutter Protection Pad (21545230)

Strip, CAMM-1 Pro GX300  Cutter Protection Pad (Sku #: 1000001385)

The cutter protection strip is one of the most important parts on your vinyl cutter. It allows for straight and true cuts without any jagged edges or ruined material. The Roland cutter pad 1000001385 is for use in the CAMM-1 Pro GX-300 vinyl cutter.

Switch, Emergency Stop Cable-Assy EMG EGX400 / EGX600

Switch, Limit, Straight Lever, (912XYZ, 19XYZ, 2818XY)

Tool, 1.5" & 2.0" Focus Tool, Pin Spirit/SGX/C180/S290/X380/X252/Mercury-I, II, III (Auto Focus Assy)

* Mercury-I Old Pin Style Phase Out (22800146G), this is the new replacement.

Tool, 2.5" Focus Tool Pin Gold Spirit/SGX/C180/S290/X380/X252/Mercury I,II, III (Auto Focus Assy)

Tool, 4.0" or 3" Focus Tool, Pin Spirit/SGX/X252 (Auto Focus Assy)

Vacuum, Chip Extraction Sys. UltraQuiet, 1/2hp w/accumulator

Key Features

• This chip removal system is quiet and efficient to use in any shop.
• The vacuum not only keeps your works space clear of debris, but it also filters 99.99% of dust out of the air!
• The systems are also self-contained so it can be used to reclaim precious metals.
• The vacuum hose supplied slips onto the vacuum connection on top of the unit and the other end connects to the collection device desired.
• The ideal location for the US-CHIPSYS-C is under the bench where the user works.

US-CHIPSYS-C Specifications

• Usage: Single station use for collecting dust at 1.5” diameter workstation
• Speeds: Single Speed
• Size: 14.Lx10.Wx12.H
• Power Requirement: 115 VAC 5A
• Overload Protection: Resettable circuit breaker included.
• Sound rating: 53db on High
• Dust Collection: Collects 99.99% of all dust (filter rated at 95% @ 1 micron)
• Motor Rating: High-Performance ½ Horsepower Motor

Valve, Airflow for Air Compressor (All Machines)

For: Spirit Si, SGE (LH01830A)