Roland Engraver Parts

290094900G MainBoard for  Puma IV 60 LX   with Puma IV 60 LX Firmware

290095350G   MainBoard for Puma IV 132 with Puma IV 132 Firmware

290095360G  MainBoard for  Puma IV 60  with Puma IV 60 Firmware

290095480G  Carriage assembly without PCB for Puma (Before S/N: T84000)

290095481G Carriage assembly without PCB for Puma IV 60LX,PumaIV 132 LX  (From S/N: T84000) 

290095660G  Carriage Assembly without PCB for Puma IV-60; Puma IV-132 (Before S/N:T84000)

290095661G  Carriage Assembly without PCB for Puma IV 60, Puma iv 132  (From S/N:T84000)

Control Panel Assembly for Puma IV

290096100G  Flat Cable Assembly for 132 Puma model  (181cm)

290096730G -AASII Carriage board assembly ADC /firmware forPuma IV-60LX; Puma IV-132LX  (T84000))

290096770G  Carriage PCB Assembly for Puma IV -60; Puma IV-132 (Before T84000)

290096840G  X-Axis Motor Assembly for Puma4-132; Puma4-132LX

290099990G  Touch Key sensor control board to Mainboard Cable Assembly for Puma 4

290105810G Flat Cable Assembly Puma4-132; Puma4-132LX  (Before S/N:T84000)  190cm

290105820G Flat Cable Assembly for  Puma4-60; Puma4-60LX (BeforeT84000) 118cm

290110090G   PCB Assembly (ESD) for Puma4-60; Puma 4-132  (From T84000)

0LX3001 Purex, 300i Volume Control Digital Fume Extractor  120v.

0LX3003 Purex 300i Volume Control Digital Fume Extractor  230v.

Purex Commercial Grade Fume Extraction System for Laser Marking Systems & Other Appl.

This machine can cater for:

30-Minutes 1-On-1 Diagnostic Phone Call Support

* Recommended for basic troubleshooting, driver installation issues, Q&A, parts replacement instructions.  

(After your purchase, a Jorlink representative will be in touch to arrange the meeting time and to provide you with a meeting link. Please be sure to select a preferred timeframe)

Disclaimer:

(a) We will do our best to troubleshoot and evaluate the problem and attempt to reach a solution. This will require clients to adjust and repairs on their own with our remote assistance and instructions. Parts may need to be purchased with a no-returns policy unless you have an active membership in our yearly 365-Support program.

(b) A per event/case call will be limited to thirty minutes (30 min Max); if the problem has not been resolved within this time, we will provide other suggestions for on-site service or additional paid services.

(c) We recommend having a person on-site with experience in the Electro-Mechanical field assist as there is electrical testing with a digital voltage meter that may be required.  CAUTION MUST be taken when around electricity or working to measure laser tube power, use protective eyewear or any other safeguards.

(e) REPAIRS ARE NOT GUARANTEED, please discuss with your Sales Rep. on upgrades and credits for our services with any trade-in equipment.

365GC Support Plan, Yearly Diagnostic Remote Contract

2nd-Additional Years Price: $495

* Hours of Operation: 9:00am - 5:00pm M-F (EST)

- Program Start Date begin with the date on this invoice and End on its' One (1) Year Anniversary.

- This program covers technical troubleshooting of software and equipment ONLY.

- This program covers 30-minutes of Q&A, “How to”.  For more in-depth training, we recommend our pre-paid 1-3-hour training sessions.

- We will attempt to assist in the repairs of your product, after a certain amount of time (~2+ Hours) we may recommend on-site assistance.

HOW IT WORKS:

1. Call us at (336) 288-1613 Ext. 202, Lets us know if you a Yearly Support Contract & you require troubleshooting Support.
2. Login on-line to our Support Portal (www.JORLINK.com > SUPPORT > CREATE HELPDESK CASE), create a case and enter your details with Severity of the problem.
3. We will contact you within 2-8 Working hours via phone or email, depending on severity of your case.
4. We will troubleshoot the problem for 30-60 minutes, thereafter we may upgrade your case to LEVEL II support.
5. If Level II support is not able to rectify the problem, we will suggest an on-site visit with labor and expenses as additional charges.

BENEFITS:

1) A ten (10%) Discount on Labor & Most Parts\\Supplies (Cermark Products & Tube repairs are excluded)

2) Helpdesk tracking for your case with SLA Service

3) Expert technical support from a Level I or Level II team

4) Returns allowed on parts with a Standard Re-stocking Fee, see our Terms & Conditions-Policies

5) Extended hours of operation, Appt Link: https://jorlink.com/contact-us

6) Loaner tools can be provided for troubleshooting purposes such as our Laser Tube Power Meter (Value at $150/loan)*    

*$50 Processing/ship fee applies

Rev. 03/30/2023MQ

0EL4110 Purex Ebase 400 Ebase 120V, for Large Desktop Base Laser Equipment

HTS Code: 8421 39 8015

INCLUDES

• 2 x Main Filters
• 2 x Pre-filters
• 1 x Connection Kit
• 1 x Power Cable
• 1 x Manual
• Ebase 400 fume extractor
• Part number 0EL4110
• Wide lasers up to 1M can be placed on top of the unit with no unsightly overhang
• Visual and audio alerts for blocked filters
• Automatic electronic flow control 
• Maintains a constant extraction rate even as the filter blocks
• LED filter status - green = ok, yellow = nearly full, red = replacement needed
• Adjustable airflow

• Varicolored filter blocked warning system
• Low capital and running costs
• Quick change, patented labyrinth pre-filters deliver longer fill 0EL4110 Purex Ebase 400
• Submicronic (HEPA) filtration removes 99.997% of particles down to 0.03 microns
• Activated carbon filtration removes harmful gas
• Simple to install and quiet in operation

The Purex Ebase 400 features analog controls and welded stainless steel construction. Its HEPA filtration removes 99.997% of particles down to 0.3 microns and is compatible with a variety of easy-to-change filters, each designed for a different application. The Ebase 400 can also be interfaced with external machinery by using an optional interface kit.

An LED on the unit's face provides constant filter status for the operator (green = ok, yellow = nearly full, red = replacement needed). In addition, there is a visual and audible alarm to indicate that the filter has become blocked.

Switch, Main Power, Illuminated DPST Green

Cover, Green Switch Cover, Splashproof 060 Cap

420181 Switch, Main Power, Illuminated DPST Green 

Spindle, Switch, Purex System: FumeCube Dual, Alpha 200\400

49000010  Y axis belt tenion gauge for Puma

GCC-290120540G - 5272 Driver Board in Common Assembly with Interlock for Touch Screen  for E200

60-Min. 1-On-1 Diagnostic Phone Call Support, Per Case Troubleshooting Evaluation (Equipment Not Purchased from Jorlink)

(After your purchase, a Jorlink representative will be in touch to arrange the meeting time and to provide you with a meeting link. Please be sure to select a preferred timeframe)

Disclaimer: (a) We will do our best to troubleshoot and evaluate the problem and attempt to reach a solution. This will require clients to adjust and repairs on their own with our remote assistance and instructions. Parts may need to be purchased with a no-returns policy unless you have an active membership in our yearly 365-Support program.

(b) A per event/case call will be limited to fifty minutes (60 min Max); if the problem has not been resolved within this time, we will provide other suggestions for on-site service or additional paid services.

(c) We recommend having a person on-site with experience in the Electro-Mechanical field assist as there is electrical testing with a digital voltage meter that may be required.  CAUTION MUST be taken when around electricity or working to measure laser tube power, use protective eyewear or any other safeguards.

(e) REPAIRS ARE NOT GUARANTEED, please discuss with your Sales Rep. on upgrades and credits for our services with any trade-in equipment.

60-Min. 1-On-1 Diagnostic Phone Call Support, Per Case Troubleshooting Evaluation

(After your purchase, a Jorlink representative will be in touch to arrange the meeting time and to provide you with a meeting link. Please be sure to select a preferred timeframe)

Disclaimer: (a) We will do our best to troubleshoot and evaluate the problem and attempt to reach a solution. This will require clients to adjust and repairs on their own with our remote assistance and instructions. Parts may need to be purchased with a no-returns policy unless you have an active membership in our yearly 365-Support program.

(b) A per event/case call will be limited to fifty minutes (60 min Max); if the problem has not been resolved within this time, we will provide other suggestions for on-site service or additional paid services.

(c) We recommend having a person on-site with experience in the Electro-Mechanical field assist as there is electrical testing with a digital voltage meter that may be required.  CAUTION MUST be taken when around electricity or working to measure laser tube power, use protective eyewear or any other safeguards.

(e) REPAIRS ARE NOT GUARANTEED, please discuss with your Sales Rep. on upgrades and credits for our services with any trade-in equipment.

630340 Knob, Flow Control Adj. 23mm w/Arrow, Purex System: FumeCube Dual

650 Dental, Vacuum Control 120V (080470D+HOOD KIT), 120v

VERSIONS:

Vacuum Control 230v. 080465D-HOOD KIT

Vacuum Control 120v. 080470D-HOOD KIT

650 w/arm and hood kit includes:
120199, 650 HOOD KIT
113505, MAIN FILTER - HEPA CHEMICAL
200025, PRE-FILTER - PAD SINGLE 362mm x 362mm

 650 Vacuum Control Brochure

Export Notes:  HTS code: 8421.39.0115, Made in the UK-England

Freight Class: 125, NMFC# 069100-03

• Clear & informative graphic display • Highest grade HEPA and carbon technology

• Automatic electronic flow control - maintains a constant extraction rate even as the filter blocks

• Gas and particle sensors to warn the operator

• Up to 2 large hoods

Cascade, In-Line Filter for 400i/800i, 

Note: The Cascade Box is fitted with a silicone vacuum sensing tube. The tube should be connected to the inlet on all vacuum machines. It should not be connected to volume machines.

Length: 430mm, Width: 430mm, Height: 1063mm, Weight: 30Kg
DIM's: Box on a Pallet  95Lbs\35Kg, 25"x25"x51" (66x66x130cm)

MUST ship Truck Freight

A2033 Satin, Anodized Black Aluminum 12" X 24" .025" Sheet (1pc)

AAASII Carriage Board Assembly for Expert 24LX  / Expert II 24LX  / Puma III

AC Adaptor, Power Unit ONLY, For MPX-95 (#17)
* 110vac Cable sold as part # RR23495118

Adapter, for Synrad Laser Ti Series, Laser Housing D-SUB Male 15pin to RJ45 Connector 

Adapter, Vacuum Assy Adaptor EGX-350 Kit w/Hose & Vacuum Duct

Adapter Vacuum Assy (Product #1000003262) is intended for use in the EGX-350. The adapter connects the hose that runs from the machine to the vacuum and is sold as a kit from Jorlink. The adapter should be replaced when damaged. The adapter is included in the chip-removal system (US-CHIPSYS-C).

Adapter, Vacuum Remote Adapter 3.5mm Cord/24VDC, Roland Mill or Engraver Communication Remote (#11054)

Adaptor, Burnisher, Inside Spring, 11/64"

Rotary Tools – Cutters Brochure Specs

Adaptor, Diamond Drag Assembly 120 Deg. with a 1/8" x 1" Diamond

Rotary Tools – Cutters Brochure Specs

Adaptor, Diamond Drag Assembly 90 Deg. with a 1/8" x 1" Diamond

Rotary Tools – Cutters Brochure Specs

Adjuster-The, Depth Control for 11/64" Spindle