Roland Engraver Parts

Flash ROM, EEPROMs SET with Odd\Even Chips (Mercury, Venus, J,L,JU)
* Firmware may be required to be loaded to EPROM by client.  Jorlink will offer this service if we have an identical machine at a cost of $90 + part.  Otherwise, client can loaded with our assistance over the phone\on-line at our hourly support rates, click here to order your support session.  

Front Panel, Board, DM/SM Controller

Gear, Pulley, Gear EGX30a & EGX30, Y-Drive (FD31.1558 +GEAR S190 CS-20, 30mm OD-Metal & 58mm OD Plastic White-Gear)

Gear, Pulley, X-Drive EGX30, EGX300/PNC-2100A/300 CS-20 EGX-30A

Holder Dia-Cutter, Diamond Scraper Adapter (CS-20, EGX30, EGX30a)

Honeycomb \ Vector Cutting Table 1/2" Squares, Mercury, X252 Aluminum Grid Plate Style

The aluminum grid cutting table is an ideal pal for laser cutting. It lifts the work piece off the work table from hitting by laser reflection while supports it with reinforced aluminum grid design. The dust and vapor created during laser cutting are then taken away effectively through the grid by down vacuum exhaust (suggested using SmartBOX™ together). Rather than handling rigid materials, aluminum grid cutting table also helps to fix flexible materials with the aid of down vacuum SmartBOX™ to keep constant focus distance and consistent cutting result. A clean and better cutting quality is achieved from this technique.

Honeycomb \ Vector Cutting Table  for  S400 Aluminum Grid Plate Style

The aluminum grid cutting table is an ideal pal for laser cutting. It lifts the work piece off the work table from hitting by laser reflection while supports it with reinforced aluminum grid design. The dust and vapor created during laser cutting are then taken away effectively through the grid by down vacuum exhaust (suggested using SmartBOX™ together). Rather than handling rigid materials, aluminum grid cutting table also helps to fix flexible materials with the aid of down vacuum SmartBOX™ to keep constant focus distance and consistent cutting result. A clean and better cutting quality is achieved from this technique.

Honeycomb \ Vector Cutting Table  for T500-GAIA

The aluminum grid cutting table is an ideal pal for laser cutting. It lifts the work piece off the work table from hitting by laser reflection while supports it with reinforced aluminum grid design. The dust and vapor created during laser cutting are then taken away effectively through the grid by down vacuum exhaust (suggested using SmartBOX™ together). Rather than handling rigid materials, aluminum grid cutting table also helps to fix flexible materials with the aid of down vacuum SmartBOX™ to keep constant focus distance and consistent cutting result. A clean and better cutting quality is achieved from this technique.

Honeycomb \ Vector Cutting Table  for X500-II & X 500 III (Before serial Q96504)

The aluminum grid cutting table is an ideal pal for laser cutting. It lifts the work piece off the work table from hitting by laser reflection while supports it with reinforced aluminum grid design. The dust and vapor created during laser cutting are then taken away effectively through the grid by down vacuum exhaust (suggested using SmartBOX™ together). Rather than handling rigid materials, aluminum grid cutting table also helps to fix flexible materials with the aid of down vacuum SmartBOX™ to keep constant focus distance and consistent cutting result. A clean and better cutting quality is achieved from this technique.

Honeycomb \ Vector Cutting Table 1/2" Squares, Spirit GX\GLS\GLS-HYB, Aluminum Grid Plate Style

The aluminum grid cutting table is an ideal pal for laser cutting. It lifts the workpiece off the work table from hitting by laser reflection while supports it with reinforced aluminum grid design. The dust and vapor created during laser cutting are then taken away effectively through the grid by down vacuum exhaust (suggested using SmartBOX™ together). Rather than handling rigid materials, aluminum grid cutting table also helps to fix flexible materials with the aid of down vacuum SmartBOX™ to keep constant focus distance and consistent cutting result. A clean and better cutting quality is achieved from this technique.

Honeycomb \ Vector Cutting Table 1/2" Squares, Spirit Si/Spirit LS, S290 Aluminum Grid Plate Style

The aluminum grid cutting table is an ideal pal for laser cutting. It lifts the workpiece off the work table from hitting by laser reflection while supports it with reinforced aluminum grid design. The dust and vapor created during laser cutting are then taken away effectively through the grid by down vacuum exhaust (suggested using SmartBOX™ together). Rather than handling rigid materials, aluminum grid cutting table also helps to fix flexible materials with the aid of down vacuum SmartBOX™ to keep constant focus distance and consistent cutting result. A clean and better cutting quality is achieved from this technique.

Honeycomb \ Vector Cutting Table 1/2" Squares, X380, MG380, Aluminum Grid Plate Style

The aluminum grid cutting table is an ideal pal for laser cutting. It lifts the workpiece off the work table from hitting by laser reflection while supports it with reinforced aluminum grid design. The dust and vapor created during laser cutting are then taken away effectively through the grid by down vacuum exhaust (suggested using SmartBOX™ together). Rather than handling rigid materials, aluminum grid cutting table also helps to fix flexible materials with the aid of down vacuum SmartBOX™ to keep constant focus distance and consistent cutting result. A clean and better cutting quality is achieved from this technique.

Honeycomb Cutting Table, C180 I & II

Hose, 4" x 25' ft Ultra-Flexible Plastic-Clear Hose,  Self Grounding

Hose, 4" x 50' ft Ultra-Flexible Plastic-Clear Hose,  Self Grounding

Jumper Blocks, Qty 10 Micro Jumpers Caps Std Circuit Bd for Bypassing Door or Sensors for All Spirit machines

Kit, Rubber Stamp Sample Kit

The Rubber Stamp Sample Kit includes:

• - (2) RUS 001 - Low Odor Laser Rubber
• - (4) RCH 005 - Self-Inking Stamp Maxum 2 - Black
• - (4) RCH 006 - Self-Inking Stamp Maxum 3 - Black

Kit, Starter Kit Cutters 1/8" for Roland Engravers (EGX20, EGX30A & EGX300, EGX350, DE-3)
Includes: .010", .015", .030", Diamond Tip, Holder-Cutter
* Manufacturer reserves the right to change certain items on this cutter kit USTL125KIT

LGCC 29000246G Lens, Beam Splitter Optic

Machine Model:  Mercury III-Rev.1

Machine Model:  Spirit Models, Explorer, Mercury, S400

(Laser Tube GEM 30/50, T,V)

GCC-290069320G Lens, Dust Prevention Window Assembly

(Pen Carriage, SI, SLS, SGLS, C180I, C180II)

Lens, Dust Prevention Window Round Assembly for Co2 Laser Models: (MEIII, Si, SGX, SLS, SGLS, SGLSHYB-Co2, X380, MG380-HYB, Gaia, S400 for Co2 Only on 2nd Prism Mount)

Machine Model: Mercury I
Product Notes: Discontinued, Limited Availability, See Terms & Conditions

MCB, Roland DGA Main Mother Board-New for EGX20 Engraver

Motor, Replacement Motor – 97047 (Replaced Blue Dot # 97005 & 97038)
For: RRUSCHIPSYSC 

Motor, Rotary Attachment for: C180\Mercury\Explorer\Spirit Laser System
(Rotary Attachment 290010151G or 29005363G)

Motor, Servo Assy, X,Y, Z-axis 48V (DM2412, DM2818)

Motor, Stepper, 1.88 Amps, 6vdc, 1.8d, 1612-2412-WB2818  X-Y Axis (Same as R6009014 & R4610017, PH2610-01)

Machine Model: Spirit Si, SGE, S290, SLS and Y-Axis Motor for: Spirit GLS & SGX, Before SN: N52181

Machine Model: Spirit GLS After Serial N52181, Spirit LS,GLS Hybrid, LE (X motor)

RR22435425 Motor, XY Axis EGX400 / EGX600 24DCv

RR22435426 Motor, Z Axis EGX400 / EGX600, Roland Rotary

Mount, Y axis mount, Spirit Si / GX / S290 (BK01835A), Double Side Mount Assembly

Nut, Leadscrew, 1/4P, 2S, Anti-backlash, Flanged Mount, 2Pc's Nut, 2" L, Triangle-Orange (1912H2XY, 2818H2XY)

Nut, Leadscrew, Threaded, 1/2P, 4S (1612Z, 2412Z, WB2818Z, C2818Z, Servo Z)

Nut, Leadscrew, Z-axis 1/2P, 4S, Flange Mount (912Z, PA9Z, WB2818Z-Old)-New Style

O-ring, Rubber for Explorer Lens Optic (MZ01408)

PCB, DC & AC Fan Control Board Set (with fan), S290/Spirit/Spirit GLS/Spirit LS/GLS Hybrid , GCC 290095420G

PCB, Laser Control Wiring Board-Coherent, Venus\Mercury (BK013DWC)

PCB, Laser Control Wiring Board-Synrad, Venus\Mercury

PCB, USB & Ethernet Communication Connector Board for 5272v1 MCB

PCB, USB & Ethernet with FlashDrive Communication Board for 5272v2 MCB (All Mach. Except C180's)

Pin, Auto Focus Pin Assy. Spirit-All\S400\C180 Model, (Previous: BK01851 - 29002547G)

Plate For Rotary Attachment, w/o Pad (All Rotary Mach. Attachments)

Power Supply, Laser Tube PS, 27vdc (Synrad 12w & 25w, Mercury, Spirit, PSP-600-30GCN Meanwell)

For GCC Models: Spirit Si, SGX, SGE, C180-I & II-30w (Synrad, V30/V40 Before Machine Serial #: K50982)

Power Supply, Laser Tube PS, 30vdc, 1500w (Synrad T60 Tubes, Spirit Series, Before SN: J50682)
* Only One (1) PS required

Power Supply, Laser Tube PS, 48vdc (ASNER Series-ALS800-48C21, 12w & C30, Mercury (C30), Venus (48-series 12w & C30), Gaia, X500, Other Models w/DEOS Tubes, 110V-600W/220V-800W)

Power Supply, Power Board for MCB 5206e for C80I, 5 & 40vdc, 75W 12V/6.2A (LPS-75-12) with 3 Month

Black/Red- 5VDC
Black/Yellow- 40VDC