Roland Engraver Parts

AS-5 By Roland, Adhesive Sheet Hold-down System (Pack of 5)

Bag, Vacuum Filter Bag (3-pk) for Chip Removal System
Filter bag (3-pk) for chip removal system
PRODUCT NUMBER: US-FLTRBAG-A3
This product #US-LN10 is a set of 3 replacement filter bags for the Chip Extraction System (Product #US-CHIPSYS-C). The Chip Extraction System is used with EGX-20/30/30A, EGC-350/360, EGX-400/600 and DE-3 engravers.

Bag, Vacuum Filter Bag (5-pk) for Chip Removal System
Filter bag (5-pk) for chip removal system
PRODUCT NUMBER: US-FLTRBAG-A5
This product #US-LN10 is a set of 5 replacement filter bags for the Chip Extraction System (Product #US-CHIPSYS-C). The Chip Extraction System is used with EGX-20/30A, EGC-350/360 and EGX-400/600 engravers.

Bag, Vacuum Filter Single Bag (1-pc) for Chip Removal System
Filter bag (1-pc) for chip removal system
This product single replacement filter bag for the Chip Extraction System (Product #US-CHIPSYS-C). The Chip Extraction System is used with EGX-20/30A, EGC-350/360 and EGX-400/600 engravers.

Bearing Assy. EGX30, EGX30a or CS-20, (3-Pack)

Belt, Roland Spindle CS-20\EGX-20, EGX-30 (3*347K)

* Roland has discontinued support and spare parts for EGX-20 and EGX-30 Models.  Please call us as Jorlink will attempt to locate and assist with legacy products and parts needs.  Email us to support@jorlink.com with your company data, machine model and images of product required.​

Cable, USB to Serial Communication (Roland ME-US3, EGX400\EGX600, EGX30) with Online Setup & Installation

* Driver Download & Installation Required by Online Appt.

Clamp-Table, Short (each)

Gear, Pulley, Gear EGX30a & EGX30, Y-Drive (FD31.1558 +GEAR S190 CS-20, 30mm OD-Metal & 58mm OD Plastic White-Gear)

Gear, Pulley, X-Drive EGX30, EGX300/PNC-2100A/300 CS-20 EGX-30A

Holder Dia-Cutter, Diamond Scraper Adapter (CS-20, EGX30, EGX30a)

Motor, Replacement Motor – 97047 (Replaced Blue Dot # 97005 & 97038)
For: RRUSCHIPSYSC 

RR22435425 Motor, XY Axis EGX400 / EGX600 24DCv

RR22435426 Motor, Z Axis EGX400 / EGX600, Roland Rotary

Ring, Nose-Guard for EGX30\EGX30A (CS-20)
* Previous Part #: 21515103 Replaced by  1000022641

Spindle, Roland EGX30\EGX30a (CS20) 1/8" Assy.

Table, EGX30A & EGX30, Surface Table Flat

This Vacuum Hose (Product #12159209) is the standard replacement for the vacuum hose for the EGX-30. The vacuum hose should be replaced when damaged, punctured or when air is not being moved well.

Vacuum, Chip Extraction Sys. UltraQuiet, 1/2hp w/accumulator

Key Features

• This chip removal system is quiet and efficient to use in any shop.
• The vacuum not only keeps your works space clear of debris, but it also filters 99.99% of dust out of the air!
• The systems are also self-contained so it can be used to reclaim precious metals.
• The vacuum hose supplied slips onto the vacuum connection on top of the unit and the other end connects to the collection device desired.
• The ideal location for the US-CHIPSYS-C is under the bench where the user works.

US-CHIPSYS-C Specifications

• Usage: Single station use for collecting dust at 1.5” diameter workstation
• Speeds: Single Speed
• Size: 14.Lx10.Wx12.H
• Power Requirement: 115 VAC 5A
• Overload Protection: Resettable circuit breaker included.
• Sound rating: 53db on High
• Dust Collection: Collects 99.99% of all dust (filter rated at 95% @ 1 micron)
• Motor Rating: High-Performance ½ Horsepower Motor

Wire, X-Axis CS-20 EGX30 (ea, 1 on Machine)

Wire, Y-Axis CS-20, EGX30 (ea., 2 on Machine)

Wrench, Tool Spanner 6-14 CS-20/EGX-30/EGX30a/EGX20

* This Tool Spanner (Product #21935115) is used to install and tighten collets within the spindle. This spanner is intended for use with the EGX-20 engraver.