Roland Engraver Parts

Sensor, PCB Board, X-axis Motor, (4-Amp, MCB-5206), For Braided Cable, with AAS I/O Re. 2 Kit Assembly (X252/X380/Mercury I,  II & III)

Includes AF Cable (20900628) & AF PCB (29000305G)

Sensor, PCB Board, X-axis Motor, For C180-I (4-Amp, MCB-5206, Replaces 29004513G & 23800235G)

Sensor, PCB Board, X-axis Motor, For C180-II (4-Amp, MCB-5206E, Replaces 290077850G & 238003710G)

Sensor, PCB Board, X-axis Motor, For Explorer, Braided Cable,  Rev. 2

Sensor, PCB Board, X-axis Motor, For Mercury-III\X252\X380\X500-III (5-Amp, New MCB-5272 Red, Replaces 290090960G), Flat Ribbon Cable
* Note: MCB-5272 will have a USB & Ethernet Connection Input (See attached image with Red Main Board)

Sensor, PCB Board, X-axis Motor, For Spirit Si\SGE\LS\GLS (4-Amp, MCB-5206, Replaces 29005107G & 29002511G, 23800226G Rev. 2-2017), Flat Ribbon Cable, AAS I
* Note: MCB-5206 will have a Parallel Connection Input

29004086G  Sensor, PCB Board, X-axis Motor, For: Gaia\X500          

Sensor, PCB, Rotary Attachment Sensor PCB

For GCC LaserPro X-Series Models X380, X252, MG-X380HYB

For GCC LaserPro X500 Series

Shear, 12" Modular- Combo (Plastics & Metals)

* Select between Metric or Imperial Guide Rullers

GCC 24100253G Shift-Lever Cam (Black) , Jaguar 

Side Support Left(Black) for GCC Expert 24

Side Support Right(Black) for GCC Expert 24

Slide Bracket for simple stand (CS only) Expert 24

GCC LaserPro Unveils SmartEYES™ CCD for S400

As one of the leading manufacturers of equipment for the visual communication industry, GCC is thrilled to launch GCC SmartEYES CCD for S400 laser engraving machine.

Spark Notes: 100mm In-Line Compact
Machine Model: Analog Series

Export Notes:  HTS Code #:  8421.39.8015, Made in the UK-England
Freight Class: 125, NMFC# 069100-03

Serie of baffles in the box… Air slows down inside the box as the cross-sectional duct area is increased to allow for larger particulate in the air stream to drop out. Air in the duct also turns through the baffles several times, this allows the largest particulate (those capable of carrying thermal energy) to transfer their energy to the cooler baffles and turn off

Spark Notes: In-Line Cabinet
Machine Model: For Digital Series (200i, 300i, 400i, 400i-PVC, 800i)
Export Notes:  HTS Code #:  8421.39.8015, Made in the UK-England
Freight Class: 125, NMFC# 069100-03

Spindle, Roland EGX20, 1/8" Assy. (90 Day Warranty)

Spindle, Roland EGX30\EGX30a (CS20) 1/8" Assy.

Spindle, Roland EGX350, 1164" Assy. with Belt 
Note: After you replace the spindle, you need to run it without any load with no tool or Collet installed for approximately 20 minutes. (90 Day Warranty)

Spindle, Roland EGX400/600, 1164" Assy. w/o Collet or Micrometer (90 Day Warranty)

Note: After you replace the spindle, you need to run it without any load with no tool or collet installed for approximately 20 minutes at 15000-RPM

• Six Wattages Available
• With Standard: Red Pointer
• Air Assist
• Automatic Focusing of Z Axis
• 2 Year Parts Warranty
• Work Area: 25" x 18" (640mm X 460 More Info
  Item code

  MGCCL-
  ISBN

  A3

Sprinkler, Flame Sprinkler System for: Spirit  Si, SLS, SGLSHYB, Mercury (MSRP $714)
Laser cutting and engraving operations using the flame sprinkler system protects the operator, machine, and the work products from potential fire hazards. During the engraving process, flaming may occur when working with combustible or easily-flammable materials, such as paper or wood. The flame sprinkler system is an optional item that automatically ejects gas to extinguish flames when they reach 68°C/155°F moments after the onset of the fire.

Response element and temperature: Fusible alloy@68°C (155°F)
Working pressure range: 0.1-1.2Mpa
Bulked coupling: 1/2” PT
Recommended Gas: CO2/N2/Dry Powder

Square Bar, Jaguar 101

SRM-20 Kit

Includes:

Vectric software SRM-20 , Diamond Drag , Tooling , V-Bit Tooling , 1/4” and 1/8” Collets , Bed Offset Hardware , Indexing Fixture , Centering Vise , AS-10 Sheets

AR-24 Stand

 290090440G Stand Assembly Including Package for the best choice in a beginner cutting plotter.

• One (1) year Limit Manufacturer's Warranty
• 90 days for Optics
• Bundle G-Mark Advance Software

• Includes: One (1) year Limit Manufacturer's Warranty
• 90 days for Optics
• Bundle G-Mark Advance Software

Sticker, Control Panel Sticker, (Explorer, Mercury II)

Sticker, Control Panel Sticker, (Spirit Models, Venus II, Mercury III, X380, X252)

Sticker, GCC LaserProi.com Logo (17"x4", Front of Laser Door, Rev. 1)

Sticker, GCC Logo Only, Small, Label (0.6"H x 2.2" L)

Sticker, GCCLaserPro Logo 4"x12.5" (Front of Laser Door, Rev. 2)

26500112G Pad, Cutting Pad, White, W 6mm, L 10m (for all cutters except i-Craft/AR-24)

All GCC Cutters excluding iCraft/AR24)

Swabs, Cotton Tip Applicators, 6" For Laser Optics (100/pck, GCC# 26500193)

Swatch Book, IPI Plastics Sample Book

Includes: Sample Chips (1" Squares) of Each IPI Rotary and Laser Color Options, Engraved Samples

GCC 241006690G Switch Cam, Puma IV (black)

GCC 24100258G Switch Cam, Puma-Puma I, II, III

Switch, Cable-Assy, Cover SW1 EGX360

Switch, Cable-Assy, Cover SW2 EGX360

Switch, DE3 Top Cover Limit Switch 1000022198

Switch, Emergency Stop for EGX-350/EGX-300

Switch, Emergency Switch (ALL GCC Models)