Roland Engraver Parts

Adapter, Vacuum Assy Adaptor EGX-350 Kit w/Hose & Vacuum Duct

Adapter Vacuum Assy (Product #1000003262) is intended for use in the EGX-350. The adapter connects the hose that runs from the machine to the vacuum and is sold as a kit from Jorlink. The adapter should be replaced when damaged. The adapter is included in the chip-removal system (US-CHIPSYS-C).

Adapter, Vacuum Remote Adapter 3.5mm Cord/24VDC, Roland Mill or Engraver Communication Remote (#11054)

AS-5 By Roland, Adhesive Sheet Hold-down System (Pack of 5)

Bag, Vacuum Filter Bag (3-pk) for Chip Removal System
Filter bag (3-pk) for chip removal system
PRODUCT NUMBER: US-FLTRBAG-A3
This product #US-LN10 is a set of 3 replacement filter bags for the Chip Extraction System (Product #US-CHIPSYS-C). The Chip Extraction System is used with EGX-20/30/30A, EGC-350/360, EGX-400/600 and DE-3 engravers.

Bag, Vacuum Filter Bag (5-pk) for Chip Removal System
Filter bag (5-pk) for chip removal system
PRODUCT NUMBER: US-FLTRBAG-A5
This product #US-LN10 is a set of 5 replacement filter bags for the Chip Extraction System (Product #US-CHIPSYS-C). The Chip Extraction System is used with EGX-20/30A, EGC-350/360 and EGX-400/600 engravers.

Bag, Vacuum Filter Single Bag (1-pc) for Chip Removal System
Filter bag (1-pc) for chip removal system
This product single replacement filter bag for the Chip Extraction System (Product #US-CHIPSYS-C). The Chip Extraction System is used with EGX-20/30A, EGC-350/360 and EGX-400/600 engravers.

Belt, Roland Spindle EGX20/EGX350/EGX400/EGX600, A-1CEBRF 5 x 170

Clamp-Table, Short (each)

Collet, 1/4"(6.35mm) for: Roland DGA EGX350/EGX400/EGX600, MDX-40, SRM-10, JXW-10
This 6.35mm Collet (Product #ZC-23-635) is for use with bottom loading end mills. It is compatible with the following Roland DGA devices: JWX-10, EGX-300/400/600, MDX-40, and SRM-10.

Collet, 1/8", ZC-23-3 Solid Split Bottom Load Collet 3mm (.125") For: DE-3, EGX300/EGX350/EGX400/EGX600

This 3mm Collet (Product #ZC-23-3) is for use with bottom loading end mills. It is compatible with the following Roland devices: JWX-10, EGX-300/400/600, MDX-40, and SRM-10.

Collet, Split, Top Load Collet 3.175mm PNC2300A (1,8") For: EGX300/ EGX350/EGX360

This 3.175mm Collet (Product #ZC-23-3175) is for use with bottom loading end mills. It is compatible with the following Roland devices: JWX-10, EGX-300/400/600, MDX-40, and SRM-10.

Collet, 11/64", Solid Bottom Load Collet 4.36 MM (.171") 

For: DE3/EGX350/EGX400/EGX600, Half Round Cutters

This Collet Holder (Product #1000003391, alternative to discontinued # 21655242) is used with standard cutting tools in the EGX-350. It should not be used with pass-through collets. This holder prevents the cutting tool from dropping through the spindle and damaging the engraving material.

Collet, 11/64", ZC-E436 Solid Bottom Load Collet (.171") For EGX300\EGX350\PNC-2300A\EGX400\600, Burnishing - Diamond Guide

This Bottom Loading Burnished Guide (Product #ZC-E436) is intended for use with the Roland EGX-Series engravers. The guide is designed for diamond drag applications and must be used with diamond engraving burnishing tools.

Control Panel, EGX 350-Handy Panel (July 2022, DISCONTINUED PART)

Ring, Depth Noze-Metal (Thick) For: EGX300\EGX350\EGX400\600\ZDN-200

 Comparison Chart

Fonts

EngraveLink Foundation Ver. 10 by CADlink for Rotary Machines

EngraveLink, Version 10, Same as EngraveLab Foundation with Extra Features which Includes: Roland & Meistergram Driver Support with Meistergram D14 Software file Import, Badges & Arc Feature. MSRP $795.00 

Provides you with a solid beginning to computerized engraving with tools for all your basic engraving needs.

Begin with industry-leading import filters, extensive file format support includes DXF, EPS, AI and PDF. Enhance your basic text with imported graphics, and improve your engraving efficiency with single-line engraving fonts. Output to a variety of Rotary Engravers, Vinyl Cutters, and CNC Machines.

MCB, Roland Main Board for EGX350\EGX360 Engraver

Micrometer, Ring Dial Set-Spindle for EGX350, DE3

Motor, Replacement Motor – 97047 (Replaced Blue Dot # 97005 & 97038)
For: RRUSCHIPSYSC 

Motor, Spindle Motor For Roland EGX30A and EGX350

RR22435425 Motor, XY Axis EGX400 / EGX600 24DCv

RR22435426 Motor, Z Axis EGX400 / EGX600, Roland Rotary

Roland DGA EGX350

Z-axis Motor

Nose Cone Adapter (2pcs), For: DE3, EGX350, EGX400, EGX600 Teflon Spindle Cone
(SRP $36/ea)

Plate, Adjust Nose, EGX350

Plate, Adjust Nose, Micrometer Plate for DE3 & EGX350

Screw, Stopper, Adjust Nose EGX-350, DE3, See RR1000003307.SUB

Adjust Nose Stopper (Product #1000003307) is intended for use with the EGX-350. The stopper tightens and keeps the micro-dial calibrated.

Screw, Stopper, Adjust Nose EGX-350, DE3, See RR1000003307.SUB

Adjust Nose Stopper (Product #1000003307) is intended for use with the EGX-350. The stopper tightens and keeps the micro-dial calibrated.

RR31049175AS Screw, wire pin locking screw (M4*20 NI) EGX350

Roland Notes: This machine has been discontinued

Spindle, Roland EGX350, 1164" Assy. with Belt 
Note: After you replace the spindle, you need to run it without any load with no tool or Collet installed for approximately 20 minutes. (90 Day Warranty)

Switch, Emergency Stop for EGX-350/EGX-300

Switch, Y-Axis Limit SW Assy for EGX350

CABLE-ASSY,LIMIT-SW-Y EGX-350

Switch, Z-Axis Limit SW Assy for EGX350

CABLE-ASSY,LIMIT-SW-Z EGX-350

Table, Surface Table for: DE-3, EGX-350

1000020471 TABLE,SV DE-3
TABLE,EGX-350 REPLACES: 1000003339

This T-Slot Table (Product # ZTT-35) is an optional accessory for use with third party vises and fixture. This table is compatible with the EGX-350 an DE3

Table, Vacuum Table (Product # ZV-23A) is an optional accessory for use with the Chip Extraction System (Product #US-CHIPSYS-C). This table is used as an alternative to adhesive sheets for holding down flat plastic material and is compatible with the EGX-350 engraver

Instructions

Vacuum, Chip Extraction Sys. UltraQuiet, 1/2hp w/accumulator

Key Features

• This chip removal system is quiet and efficient to use in any shop.
• The vacuum not only keeps your works space clear of debris, but it also filters 99.99% of dust out of the air!
• The systems are also self-contained so it can be used to reclaim precious metals.
• The vacuum hose supplied slips onto the vacuum connection on top of the unit and the other end connects to the collection device desired.
• The ideal location for the US-CHIPSYS-C is under the bench where the user works.

US-CHIPSYS-C Specifications

• Usage: Single station use for collecting dust at 1.5” diameter workstation
• Speeds: Single Speed
• Size: 14.Lx10.Wx12.H
• Power Requirement: 115 VAC 5A
• Overload Protection: Resettable circuit breaker included.
• Sound rating: 53db on High
• Dust Collection: Collects 99.99% of all dust (filter rated at 95% @ 1 micron)
• Motor Rating: High-Performance ½ Horsepower Motor

Vise, Fixture Kit (Vise, Pin Jig, Pen Fixture, Ruler Bar Fixture, 2 Medallion/Seal Fixtures) For: EGX-300/350/360/400/600

Vise, Machine Center Vise (PNC-2300/EGX-300/EGX-350)

Wire, X-axis EGX350 1000003234

Roland Notes: This machine has been discontinued

Wrench, EGX-350 Spanner Wrench Tool (2 sided)

* This Tool Spanner (Product #21935111) is used to install and tighten collets within the spindle. This spanner is intended for use with the EGX-350 and EGX-400/600 engravers.