W700169020, Main Board for Roland SV-12 & SV 8 Vinyl Cutter Stika | Roland STIKA Parts
X
Cannot find a part?
Please complete our
Parts Inquire Form for assitance
parts inquiry form

Roland STIKA Parts

Main Board for Stika SV-8, SV-12
Main Board for Stika SV-8, SV-12
Main Board for Stika SV-8, SV-12
11/23/2021
RRW700169020
W700169020
1 lbs
$395.00

 

Main Board for Roland SV-12 & SV 8 Vinyl Cutter Stika

 

MODEL SV-15 SV-12 SV-8
Cutting method Media-moving method
Maximum cutting area 13-3/8 (X) x 39-5/16” (Y)
[340 (X) x 1000mm (Y)]
9-13/16 (X) x 39-5/16” (Y)
[250 (X) x 1000mm (Y)]
6-1/4 (X) x 39-5/16” (Y)
[160 (X) x 1000mm (Y)]
Acceptable sheet size* Width: 14-1/8 to 15”
(360 to 381 mm)
Length: 43-1/4” (1100mm) or less
Width: 11 to 12”
(280 to 305mm)
Length: 43-1/4” (1100mm) or less
Width: 7-13/16 to 8-7/16”
(200 to 215mm)
Length: 43-1/4” (1100mm) or less
Cutting speed 7/16 to 3-7/8ips.
(12 to 100 mm/sec.)
7/16 to 1-9/16ips
(12 to 40 mm/sec.)
7/16 to 1-9/16ips
(12 to 40 mm/sec.)
Acceptable material PVC or label material of 0.004” (0.1 mm) or less in thickness. Total material thickness including the backing of0.012” (0.3 mm) or less
Interface** >USB 1.1
Power supply Dedicated AC adapter input: AC 100V +/- 10%, 50/60Hz 1.7A Output: DC 19 V 2.1 A
External dimensions 20-5/8(W) x 8-1/8(D) x 4-1/2”(H)
[522(W) x 205(D) x 115(H)mm]
17-3/8(W) x 8-1/8(D) x 4-1/2”(H)
[440(W) x 205(D) x 115(H)mm]
13-3/8(W) x 8-1/8(D) x 4-1/2”(H)
[340(W) x 205(D) x 115(H)mm]
Power consumption Aprox. 20W (including AC adapter)
Weight (unit only) 7.3 lb [3.3 kg] 6 lb. [2.7 kg] 4.9 lb. [2.2kg]<
Acoustic noise level 60 dB (A) or less (According to ISO 7779)
Operating environment Temperature: 41 to 104 °F [5 to 40 °C]
Humidity: 35 to 80% non-condensing
Included items AC adapter, power cord, USB cable, replaceable blade protector, blade, blade holder, pin, material for test cuts, application tape for test cuts, Roland Software Package CD-ROM (CutStudio design software, plug-ins for CorelDraw 10, 11,12 and Adobe Illustrator 9, 10, CS, Stika Windows Navi utility), SV-15/12/8 user's manual

*Depending on the type of material, lengths longer than 19-5/8” [500mm] may shift during cutting.
**Compatible with Windows 98 SE/Me/2000/XP and Mac OS 9 or later.

Three STIKAs

The STIKA comes in three models. The SV-8 accepts 8.5-inch wide media and cuts up to 6.2 inches wide. The SV-12 accepts 12-inch wide media and cuts up to 9.8 inches wide. The SV-15 accepts 12- or 15-inch media and cuts up to 13.3 inches wide. They all handle vinyl, paint mask, reflective vinyls, twill, heat transfer, and etching material.

Print/Cut Solution

In addition to cutting vinyl and other materials, the new STIKA makes an easy-to-use and cost-effective print/cut solution. Users print registration marks with their desktop printer, load the printed graphic into the cutter, send the file to the STIKA and it contour cuts the graphics. It's perfect for creating colorful POP displays, and iron ons.

CutStudio Software

Every STIKA ships with Roland CutStudio. This powerful design software lets you reduce, re-position, rotate, tile and mirror images. It enlarges images as crisp as original size and cuts TrueType fonts without outlining. CutStudio also supports BMP, JPG, STX, AI, and EPS file formats. Plugins for Adobe Illustrator (Mac and PC) and Corel Draw (PC) are also included.

 

 

 

Easy to Use

 

Making professional-looking graphics is a snap with the STIKA. Simply design your graphics with bundled Roland CutStudio software, peel away the excess vinyl, and apply. It’s that easy. You can even contour cut printed graphics using your desktop printer and the STIKA driver.

 

Connectivity

 

With a convenient USB port, the STIKA offers plug-and-play capabilities for both Mac and PC systems. The USB cable is included!

 

Roland Reliability

 

Roland cutters have earned worldwide reputation for reliable performance and outstanding results. Today, like all Roland products, they come with an international ISO certification. This signals Roland’s commitment to offering top quality products backed up with first-rate customer service and a wide variety of supplies and accessories.

Over the past 17 years, Roland has sold more than a quarter million vinyl cutters worldwide. Most of them are still in production today.

 

One-Year Limited Warranty

 

Every STIKA Desktop Vinyl Cutter is backed up by a one-year limited warranty covering manufacturer’s defects and malfunctions attributed to premature failure of individual components or the entire device. For complete terms and conditions, please visit theRoland Care page.

 

Roland SV-12 Vinyl Cutter



Application/ Software Guides

 

 

Advanced Guide to CAMM-1 Pro, HTML

This is an HTML-based product guide for CAMM-1 Pro and CutStudio functions. This .exe file can be unzipped and installed to your desktop.

3.51 MB

Roland GX-24 Operation Manuals

This zip file includes the installer for the Roland GX-24 operation manuals. Manuals include the CutStudio Plugin setup guide, print and cut guide and a general reference guide for the GX-24.

3.74 MB

Stika SV Advanced Guides

This is an installer for STIKA Windows Advanced Guide. Follow the instruction of "readme.txt" for installation instructions.

3.36 MB

Stika SV Advanced Guides for Macintosh

This is a cutting guide for Macintosh. Follow the instruction of "readme.txt" for installation.

190 KB

 

 

 

Drivers

 

 

Windows 2000

 

 

Windows 2000/XP driver version 1.05

[Model] : STX-7, STX-8, SX-8, SX-12, SX-15, SV-8, SV-12, SV-15 [OS] : Windows2000, WindowsXP

26 KB

Windows 7

 

 

Windows 7(32 bit) driver version 1.051

[Model] : SV-15, SV-12, SV-8 [OS] : Windows7 This driver is a beta version, not an officially released version.

26 KB

Windows XP/Vista/7(64 bit) driver version 0.91

[Model] : SV-15/12/8 [OS] : Windows7(x64), Vista(x64), XP(x64) This driver is a beta version, not an officially released version.

26 KB

Windows 8

 

 

Windows 8 - Driver version 1.10 (32-bit only)

Stika Driver for Windows 8, ver 1.10 (32-bit ONLY) Models: SV-8/12/15 Please use "SETUP.exe" in the extracted folder. Please refer to "readme.txt" for installation.

5.05 MB

Windows 8 - driver version 1.10 (64-bit only)

Stika Driver for Windows 8, ver 1.10 (64-bit ONLY) Models: SV-8/12/15 Please use "SETUP64.exe" in the extracted folder. Please refer to "readme.txt" for installation.

5.6 MB

Windows 95/98

 

 

Windows 95/98/Me driver version 2.11

[Model] : STX-7, STX-8, SX-8, SX-12, SX-15, SV-8, SV-12, SV-15 [OS] : Windows95, Windows98, WindowsMe Please follow the instruction described in "readme.txt" for installation.

26 KB

Windows Me

 

 

Windows 95/98/Me driver version 2.11

[Model] : STX-7, STX-8, SX-8, SX-12, SX-15, SV-8, SV-12, SV-15 [OS] : Windows95, Windows98, WindowsMe Please follow the instruction described in "readme.txt" for installation.

26 KB

Windows <st1:place w:st="on">Vista

 

 

Windows XP/Vista/7(64 bit) driver version 0.91

[Model] : SV-15/12/8 [OS] : Windows7(x64), Vista(x64), XP(x64) This driver is a beta version, not an officially released version.

26 KB

Windows Vista(32 bit) driver version 1.05

[Model] : SX-8, SX-12, SX-15, SV-8, SV-12, SV-15 [OS] : WindowsVista

26 KB

Windows XP

 

 

Windows 2000/XP driver version 1.05

[Model] : STX-7, STX-8, SX-8, SX-12, SX-15, SV-8, SV-12, SV-15 [OS] : Windows2000, WindowsXP

26 KB

Windows XP/Vista/7(64 bit) driver version 0.91

[Model] : SV-15/12/8 [OS] : Windows7(x64), Vista(x64), XP(x64) This driver is a beta version, not an officially released version.

26 KB

 

 

 

Extended warranty

 

 

Protection Plus Extended Warranty Enduser Price Guide_Specialty_RCare

Pricing as of 5/3/2012

283 KB

 

 

 

Owner/ User Manual

 

 

User's Manual, SV-15-12-8 (Spanish)

SV-15-12-8 Manual del Usuario. SV-15-12-8 User's Manual, Espanol.

2.08 MB

Users Manual, SV-8/12/15 (English)

Users manual for Stika vinyl cutter models SV-8, SV-12 and SV-15

1.4 MB

 

 

 

Setup/ Install Guides

 

 

Basic Roland CutStudio installation and configuration

This document covers CutStudio Driver Installation, CutStudio Software Installation, CutStudio Plug-in Installation and CutStudio Software Overview

1.82 MB

Setting Permissions for Cut Studio Plug In (Mac OSX)

The following document outlines how to setup the proper permissions for the Roland CutStudio to output Adobe Illustrator cut data properly for users who are not the primary accounts on a Macintosh or who do not have administrative permissions.

284 KB

Stika Port Test Guide

Stika Port Test Guide for Roland Stika Vinyl Cutters

82 KB

Windows 7_Windows Vista Driver Installation

This document outlines the procedures to install a Roland driver in Windows 7 and Windows Vista.

239 KB

 

 

 

Software Updates

 

 

Cut Studio Windows Plugin For Illustrator CS4/CS5/CS6/CC

This is a plug-in for Roland CutStudio on Adobe Illustrator CC/CS6/CS5/CS4. Download the exe file, and extract it. Follow the instruction described in "readme.txt" in the extracted folder.

2.6 MB

CutStudio Plugin for Corel, Windows, Version 1.30

Download the exe file, and extract it. Follow the instructions described in "readme.txt" in the extracted folder. This plug-in works with CorelDRAW version X3, X4, X5 and X6.

12 KB

CutStudio Plugins for Windows

CutStudio plugins installer for Windows operating system. Adobe Illustrator and CorelDraw plugins included. Please use "PluginSetup.exe"

443 KB

CutStudio_AI-PlugIn_for_Mac_ver170

CutStudio_AI-PlugIn_for_Mac_ver170 This is a plug-in for Roland CutStudio in Adobe Illustrator CC/CS6/CS5/CS4. Download the file, and extract it. Follow the instruction described in "readme.txt" in the extracted folder

4.94 MB

CutStudio_ver151

CutStudio_ver151 Updater

4.78 MB

Dr. STIKA Plus Sign Software

Dr. Stika Plus sign software package.

1.92 MB

Roland CutStudio Updater to version 1.40

This file is for updating CutStudio to the latest version. You need to have Roland CutStudio already installed. Download the exe file, and extract it, then, click "updater.exe" to follow the instruction as displayed.

3.63 MB

 

 

 

Training videos

 

 

CutStudio Illustrator Plugin

Using the CutStudio plugin with Adobe Illustrator for print/cut applications with a 3rd party RIP and/or 3rd party printer. Designed for use with a GX cutter.

28 KB

Roland Academy Webinar Series

Follow this link to the Roland Academy Webinar Series. Once there you can sign up for any of our upcoming webinars or view our recorded archive library!

25 KB

Windows 7 Driver Install PNP Method

The following video outlines how to install a Windows 7 compatible USB driver via the plug and play method.

23 KB

Windows 7 Driver Installation Preinstall Method

The following video outlines how to install a true Windows 7 print driver using the pre-installation method.

23 KB

 

Jorlink USA, Inc,
3714 Alliance Dr., Suite 100
Greensboro, NC 27407
TEL: (336) 288-1613
eMail: sales@jorlink.com

M-F 9am-5pm EST 
Facebook Linkedin twitter Instagram YouTube