Fume Extractors for Electronics Manufacturing Processes 


The soldering process itself can produce some, if not all, of the fumes in the list below. These fumes can cause occupational asthma, long term carcinogenic diseases and other serious complaints. The result of these illnesses can be expensive compensation claims from employees, long term sickness and poor employee relations, plus heavy penalties from enforcement agencies.

LPH426 LASER FUME EXTRACTION

• Large reinforced table top (28”x 26”). Custom sizes available.
• Telescopic legs for extra stability
• Front door filter access, No-Tools filter maintenance
• Designed for medium duty applications
• Multi-stage filtration system: pre-filter, HEPA and chemical filter
• LaserBlue gel seal guarantees ZERO FILTER BYPASS
• Dual high speed turbine for high suction, pressure and airflow
• Whisper quiet operation
• Digital control panel
• Also available: brushless units and custom filter configurations

• CFM:  280 (482m³ / hr)

• AMPS:  12.8   (120v.)  /  6.6  (240v.)

• High Speed Turbine

• FILTERS:  F166-125 , (AG168), (AG169), F069-071, F071, F074, AG09

Bottom side discharge 

• Our most popular unit for small to medium duty laser applications
• Designed to fit into an application where direct capture from the source is possible
• The SPH uses high power blower motors to pull the air through  3 stages of filtration consisting of a pre-filter for large particulate, a certified HEPA filter to capture 99.97% of all particulate greater than 0.3 micron and a chemical filter with up to 40 lbs. (18kg) of odour and VOC treatment
• LaserBlue Gel seal guarantees NO BYPASS
• This unit is available in brushed and brushless versions
• This unit has many options and can be customized for OEM applications
• We offer single or dual inlet lids with multiple diameter inlets as well as extended lids with either top or bottom intakes for customers using these units under tables. In total we have 18 different lids, ask us about your application!

• Filters:  F166 PAD, F071,F074,AG097

• 120 volt

• 4" INLET

• variable speed control,

• AR175 Brush motors

• 8" of HD hose

   

Bottom Side Discharge

• Our most popular unit for small to medium duty laser applications
• Designed to fit into an application where direct capture from the source is possible
• The SPH uses high power blower motors to pull the air through  3 stages of filtration consisting of a pre-filter for large particulate, a certified HEPA filter to capture 99.97% of all particulate greater than 0.3 micron and a chemical filter with up to 40 lbs. (18kg) of odour and VOC treatment
• LaserBlue Gel seal guarantees NO BYPASS
• This unit is available in brushed and brushless versions
• This unit has many options and can be customized for OEM applications

• 120 volt 

• 4" INLET

• bottom grill discharge

• F166 PAD, F071,F074,AG097, 

• variable speed control

• AB045-25 Brushless  motors

• 8' of HD hose

• We offer single or dual inlet lids with multiple diameter inlets as well as extended lids with either top or bottom intakes for customers using these units under tables. In total we have 18 different lids, ask us about your application!

Bottom Grill Discharge 

High pressure Brushless Motor

Twice as powerful as the SPH 400, this is our most powerful unit for medium to heavy duty laser applicationsSPH 800 series

• Designed to fit into an application where direct capture from the source is possible the SPH uses high power blower motors to pull the air through 3 stages of filtration consisting of a pre-filter for large particulate, a certified HEPA filter to capture 99.97% of all particulate greater than 0.3 micron and a chemical filter with up to 80 lbs. (36kg) of odour and VOC treatment
• LaserBlue Gel seal guarantees NO BYPASS
• This unit is available in brushed and brushless versions with up to 560cfm.
• This unit has many options and can be customized for OEM applications
  Compact installation requiring no bulky and expensive ductwork
• Filters easily accessed and changed in less then 1 minute ( no tools required )
• Powder coated durable welded cabinet
• Recirculating purified air reduces heating and air conditioning cost

• Filters: (2) F166 PAD, (2) F071, (2) F074, (2) AG097

• 230 volt, 2 x  4" inlets

• bottom grill discharge 

•  variable speed control

• AB045-25 Hi Airflow Brushless

•  8' of HD hose

Bottom Side Discharge 

Brush Motor

SPH 800 

• Twice as powerful as the SPH 400, this is our most powerful unit for medium to heavy duty laser applications
• Designed to fit into an application where direct capture from the source is possible the SPH uses high power blower motors to pull the air through 3 stages of filtration consisting of a pre-filter for large particulate, a certified HEPA filter to capture 99.97% of all particulate greater than 0.3 micron and a chemical filter with up to 80 lbs. (36kg) of odour and VOC treatment
• LaserBlue Gel seal guarantees NO BYPASS
• This unit is available in brushed and brushless versions with up to 560cfm.
• This unit has many options and can be customized for OEM applications
  Compact installation requiring no bulky and expensive ductwork
• Filters easily accessed and changed in less then 1 minute ( no tools required )
• Powder coated durable welded cabinet
• Recirculating purified air reduces heating and air conditioning cost

• Filters:  (2) F166 PAD, (2) F071, (2) F074, (2) AG097

• 230 volt, 2 x  4" inlets

• bottom grill discharge 

•  variable speed contro

•  (3) AR176 Brush motors

•  8' of HD hose

SPH400, Series, Medium-Heavy Duty Filtration System
Specs: 120 volt, 4" Inlet, Bottom Grill Discharge  F166 PAD, F071,F074,AG097, Variable Speed Control, (2) AR175 Brush Motors, 8' of HD Hose
HTS#: 8421.39.8015, Origin: CND

Bottom grill discharge 

• Our most popular unit for small to medium duty laser applications
• Designed to fit into an application where direct capture from the source is possible
• The SPH uses high power blower motors to pull the air through  3 stages of filtration consisting of a pre-filter for large particulate, a certified HEPA filter to capture 99.97% of all particulate greater than 0.3 micron and a chemical filter with up to 40 lbs. (18kg) of odour and VOC treatment
• LaserBlue Gel seal guarantees NO BYPASS
• This unit is available in brushed and brushless versions
• This unit has many options and can be customized for OEM applications
• We offer single or dual inlet lids with multiple diameter inlets as well as extended lids with either top or bottom intakes for customers using these units under tables. In total we have 18 different lids, ask us about your application!

• Filters:  F166 PAD, F071,F074,AG097

• 120 volt

• 4" INLET

• variable speed control,

• AR175 Brush motors

• 8" of HD hose

   

Bottom Grill Discharge

• Our most popular unit for small to medium duty laser applications
• Designed to fit into an application where direct capture from the source is possible
• The SPH uses high power blower motors to pull the air through  3 stages of filtration consisting of a pre-filter for large particulate, a certified HEPA filter to capture 99.97% of all particulate greater than 0.3 micron and a chemical filter with up to 40 lbs. (18kg) of odour and VOC treatment
• LaserBlue Gel seal guarantees NO BYPASS
• This unit is available in brushed and brushless versions
• This unit has many options and can be customized for OEM applications

• 120 volt 

• 4" INLET

• bottom grill discharge

• F166 PAD, F071,F074,AG097, 

• variable speed control

• AB045-25 Brushless  motors

• 8' of HD hose

• We offer single or dual inlet lids with multiple diameter inlets as well as extended lids with either top or bottom intakes for customers using these units under tables. In total we have 18 different lids, ask us about your application!

Quatro SPH82B5i-T44G-EA c/w HD NA 230V Twist Lock Power Cord
Medium-Heavy Duty Filtration System
Specs: 230 volt, (2) F166-125, (2) F071 + (2) 2" Filter Support, (2) F074, (2) AG097 "Brushless" Motors, E519 Power Cord, 1 Port Capped, 16Ft 4" HD Hose + 4 Hose Clamps
HTS#: 8421.39.8015, Origin: CND

Bottom Side Discharge 

High pressure Brushless Motor

Twice as powerful as the SPH 400, this is our most powerful unit for medium to heavy duty laser applicationsSPH 800 series

• Designed to fit into an application where direct capture from the source is possible the SPH uses high power blower motors to pull the air through 3 stages of filtration consisting of a pre-filter for large particulate, a certified HEPA filter to capture 99.97% of all particulate greater than 0.3 micron and a chemical filter with up to 80 lbs. (36kg) of odour and VOC treatment
• LaserBlue Gel seal guarantees NO BYPASS
• This unit is available in brushed and brushless versions with up to 560cfm.
• This unit has many options and can be customized for OEM applications
  Compact installation requiring no bulky and expensive ductwork
• Filters easily accessed and changed in less then 1 minute ( no tools required )
• Powder coated durable welded cabinet
• Recirculating purified air reduces heating and air conditioning cost

• Filters: (2) F166 PAD, (2) F071, (2) F074, (2) AG097

• 230 volt, 2 x  4" inlets

• bottom grill discharge 

•  variable speed control

• AB045-25 Hi Airflow Brushless

•  8' of HD hose