New-Demo X380-100\25-Watt Hybrid LaserPro SmartCut Laser (V100) w/ water chiller ... One (1) year Manufacturer's Limited Parts Warranty (90 days consumables) with Free Labor\Mainternance at Jorlink-HQ Depot Repairs, SRP $20,000 (Click Here for more)
 |
Synrad and RICI Laser Tubes
For versatility |
 |
RoHS Compliance
All GCC products are RoHS-compliant (the European Parliament Directive 2002/ 95/ EC, Restriction of Hazardous Substances) and lead-free (pb free). GCC will continue to concern and provide environmentally friendly products to protect the earth for our further generation. |
 |
Dual Laser Tubes (Patented)
Possesses the high engraving quality of RF driven laser tubes while taking advantage of low per-wattage cost of DC excited CO2 glass laser tubes to deliver clear cutting edge on thick materials. |
 |
Innovative Software Features
Simple step engraving and cutting laser parameters in GCC LaserPro driver, MG380Hybrid will automatically use different laser tubes to do its best output quality. A real smart laser engraver/ cutter ever. |
 |
Emergency Stop
Big red button located on the top of the machine allows operators to stop the laser and the motion carriage immediately to provide a highly safe operational environment. |
 |
Motion System with DC Servo Motor
The GCC LaserPro MG380Hybrid utilizes a high speed closed-loop DC servo motor for precise and fast carriage movement to ensure exceptionally accurate cutting outputs. |
 |
AutoFocus (Patented)
Patented Autofocus Gauge adjusts the laser engraver to the precise focal point on the engraving area automatically. The Autofocus is the most effective lens-focusing tool that prevents human error when exact measurement of distance from the surface of the working material is needed. |
 |
Programmable Origin
Easy-to-use position modes allow the operator an effortless way to setup a job with Drag-N-Engrave. Repetitive workflows can be drastically simplified by relocating the origin position to any desired location. |
 |
SmartBOX™ (Optional)
This innovative design is composed of a ventilation box, a honeycomb table and easily rearrange able magnetic supporting pieces. The SmartBOX™ provides great cutting quality and remarkably enhances air extraction. |
 |
Pass-Through Front and Rear Doors
This convenient front and rear door design enables operators to load extremely long working pieces. |
 |
Easy-to-use Control Panel
Embrace total solution in one machine. Innovative GCC LaserPro MG380Hybrid deliver superior engraving and cutting result by its high end technology. |
 |
Rigid and Reliable Construction
Solid machine structure ensures superior output quality and motion stability for superb performance. |
 |
Superb Engraving and Cutting Quality
Designed for simplifying complex tasks, the GCC LaserPro MG380Hybrid’s user-friendly interface is a great facilitator to provide powerful function settings. |
 |
AAS Contour Cutting Device (patented)(Optional)
Developed by LaserPro, AAS is an exceptionally user-friendly operation which offers accurate and faultless contour cutting by automatically tracking the position of graphics. |
 |
Job Preview Function
The GCC LaserPro laser engraver all series printer driver features a job preview function that previews graphics before the official laser printing process. One of the highlights of this feature is that it provides an estimated working time*. The estimated working time is an easy tool for operators to know in advance as how much time will be needed to finish the job for better job management; it is also convenient for a shop to provide a quotation for its laser services. |
More Info: MGX380-HYB DEMO-New or Certified REFURB. Machine
Description: X380-100\25-Watt Hybrid LaserPro SmartCut Laser (V100) w/ water chiller ... (MSRP $20,000)
Part#: MGL-X380HYB.DEMO
Serial #: R98181
Features Included: Red Pointer, Air Assist Ready , DC-Servo Motors, Drag-N-Play, Smart Center, Pass-Through Front & Rear Doors, Long-Life High-Speed Rail\Bearings, Automatic Focusing of Z Axis with an Expandable Work Area: Expandable to 38”x24”
Included with this unit:
(1) One (1) Year Jorlink Depot Warranty
(2) One (1) Year GoldCare Phone Support ($395)
(3) Free Demo\New Accessories (Honeycomb Table, Air Compressor, Blower)
* Warranty: One (1) Year Parts Warranty. Jorlink will pay for replacement parts and pay one way to client. Client is responsible for replacement of parts and for non-consumable parts returning defective parts to Jorlink. If a technician is required on-site client will be responsible for a Flat Fee of $495 for the day during the warranty period plus any major travel expenses (air\extended stay).
** Setup\Install is recommended and options at $1,200 Daily (Local clients, air travel may apply airfare).
*** Free Pick-Up at Jorlink-NC Facility or Shipping Available, Freight Charges Apply (Approx. $850+ USA Continental).
**** Satisfaction Guaranteed- 30 Day Trade-in period for upgrade credit to a new machine if client decides to upgrade unit.
Other Conditions:
• 100-Watt Glass Tube with a 25+ Watt Synrad Metal Tube
• Work Area: 38 x 24” in. (960 x 610 mm) with User Programmable Origin
• Windows Base Print Driver, Open Architecture Electronics allowing many graphics program such as EngraveLab Laser, CorelDraw, Adobe, AutoCAD
• Motion System with DC Servo Motor
• Pass-through Front and Rear Doors (Optional Interlock Bypass)
• Includes Industrial CW5000 Water Chiller
• Includes USA II-VI Optics with 2” Lens (Optional 1.5” or 3”)
• RoHS Compliance
• Optional accessories available (Honeycomb Table, Rotary Attachment, Air Compressor, SmartPrint Apple Driver and more…)
w/o AAS Work Area 960x610m, Speed 40ips
w/ AAS Work Area 790x580mm, Speed 32ips
Web Link: https://jorlink.com/machines/refurbished-machines/productid/10645
All Warranty & Service activities by either the manufacturer or support services from Jorlink shall be applicable to addresses based in the Continental United States.
For our Warranty, Terms and Conditions, please visit our website or the link below: https://www.jorlink.com/support/documentspolicieswarranties.aspx
DIM's: 990-Lbs 78"Lx49"Wx51"H (FOB Point: Greensboro-NC)
Entry-Level Fume Extraction System
In addition to Purex, GCC also offers a series of entry-level fume extraction units for customers who run for general purposes and relative light duty operation. GCC LaserPro PA-1500FS & PA-1000FS, CE-certified fume extraction systems, are designed to remove the hazardous fumes and dusts during laser processing to protect the health of operators, eliminate environmental pollution and enhance the laser cutting and engraving quality at the same time.
The GCC PA-1000FS fume extraction unit is suggested to work with Mercury, X252, or desktop engravers, while PA-15000FS works great on Spirit series, X380, and MG380Hybrid laser systems.
External Interface Control Board
The External Control Interface Board is an optional item that allows users to set up GCC laser machines for communication with external devices such as odor reduction units, robot arms and others via a 5V or 12V signal to form an automatic production line. Another useful practice applies in certain working environments when users are required to set up an extra remote interlock control or when laser machines are allowed to be switched off if a security device is triggered.
AAS Contour Cutting Device (Patented)
Developed by GCC LaserPro, AAS is an exceptionally user-friendly operation which offers accurate and faultless contour cutting by automatically tracking the position of graphics.
Note: Working area and engraving speed will be reduced when AAS module is installed.
SmartBOX™
An innovative technology that integrates the ventilation box with a honeycomb table or Aluminum grid cutting table. The result is not only a precise cut with sharp edges, but also a clean laser table to work on.
Rotary Attachment
Allows the laser system to perform at another level! By using the rotary attachment, engraving on cylindrical or round objects is now possible. This option uses a fourth axis to rotate your object 360° to allow engraving on cups, wine glasses or even a baseball with two types of conical fixture available. The minimum/maximum diameter and length of the working object is 90/180mm and 450mm respectively. Its maximum weight should not exceed 4kgs.
*Please note that the Rotary Attachment is not able to work with AAS module at the same time.
SmartAIR™ Fine Nozzle
The optional SmartAIR Fine Nozzle is recommended for engraving or cutting thin materials such as textile. The smaller caliber nozzle is positioned closer to the object for a concentrated blast directed over a small area to eliminate burning on the cutting edge. The perfectly-vertical design of the SmartAIR Fine Nozzle produces a concentrated airflow to blow away dust and unwanted residue, leaving a clean product surface.
Purex Fume Extraction System
GCC teams up with a UK company to offer the Purex fume extraction unit for its full-line LaserPro laser engraving and cutting systems. These Fume Extraction Systems are specifically designed to prevent personnel from inhaling hazardous fumes and dust generated during the process. Applicable to all GCC LaserPro engravers, the Purex Fume Extraction System represents the latest invention in the exhaust extraction and smoke reduction technology for all types of applications. Noise-free operation, high vacuum capacity, compact design and long life expectancy are just a few of its outstanding features. Powered by a maintenance-free, continuous-running turbine, the Fume Extraction System, which is CE-compliant, ensures personnel safety and legal compliance.
Air Compressor
A specially designed Air Compressor for laser engravers, by using an oil-less diaphragm, you help eliminate the harmful and damaging side effects of moisture on the laser optics. Also, provides the optimal air pressure your laser needs to blow away vaporized particles and helps prevents overheating. A must to keep lenses and mirrors clean to promote longer laser life.
SmartGUARD™ Fire Alarm (Patented)
Laser cutting and engraving operation using the SmartGUARD Fire Alarm assures optimum safety. When there is a malfunction, the alarm system will be active and shut-down the operation system immediately.
Honeycomb Table
The honeycomb table is an ideal tool for laser cutting, especially when cutting materials into small pieces. It lifts the work piece off the work table from hitting by laser reflection while supports it with honeycomb cell design. The dust and vapor created during laser cutting are then taken away effectively through the honeycomb cell by down vacuum funnel exhaust. Rather than handling rigid materials, honeycomb table also helps to fix flexible materials with the aid of down vacuum to keep constant focus distance and consistent cutting result. A clean and better cutting quality is achieved from this technique.
A Picture Conveys a Thousand Words
SYNRAD metal laser tube (top) vs. glass tube (bottom)
Twelve (12) Months Manufacturer's Warranty with Free Jorlink-HQ Depot Repairs
|
Warranty Policy is Effective from 01/01/2019
|
|
GCC, a global forefront equipment-manufacturing provider in the visual communication industry, is pleased to announce New Product Warranty Policy. The warranty period for new qualifying machine purchases will be counted from Installation Date provided the following conditions are met.
The condition and workflow have been displayed below :
- New Product Warranty Policy is applied to machine shipped from GCC in 2019.
- When the machine sold to end user, it is important to advise end user immediately to link to the GCC’s club http://gccf.gcc.com.tw/gccclub/login.aspx to sign up and input the machine Serial number and their basic data to activate the machine warranty. Then the warranty of this specific serial number of machine will be changed from the invoice date to data input date (i.e., Purchasing Date that end-user purchases machine)
- However, the max. Periods for end user to activate the machine warranty is 180 calendar days from invoice date. If machine fails to be registered within this 180 days period, there will be no any extended warranty and the machine warranty period will be by default still from the invoice date.
- Warranty for Consumable item, Optional item and Spare parts are counted from GCC Invoice Date without change.
|