X

 

SUPPORT TICKET

 
 

Specials

Go
dn
Collar, Clamp, Large Collar, Clamp, Large, 11/64 Spindle-3 Pulley More Info
12/17/2013
R5005004.1
$75.50
Collar, Clamp, Spindle Collar, Clamp, 11/64 Spindle-1 Pulley (912, OD=1.25, ID=0.75) More Info
12/17/2013
R5014025.1
$75.50
Collar, Clamp, Spindle Collar, Clamp, Spindle 1/4 More Info
12/17/2013
R5005014.1
$75.50
Collet, 1/4”, ZC-23-635 Solid Bottom Load Collet (.250")
Collet, 1/4”, ZC-23-635 Solid Bottom Load Collet (.250")

Collet, 1/4"(6.35mm) for: Roland DGA EGX350/EGX400/EGX600, MDX-40, SRM-10, JXW-10
This 6.35mm Collet (Product #ZC-23-635) is for use with bottom loading end mills. It is compatible with the following Roland DGA devices: JWX-10, EGX-300/400/600, MDX-40, and SRM-10.

More Info
1/16/2015
RR-ZC23635
ZC-23-635
0.5 lbs
$44.95
Collet, 1/8", ZC-23-3 Solid Split Bottom Load Collet 3mm (.125")
Collet, 1/8", ZC-23-3 Solid Split Bottom Load Collet 3mm (.125")

Collet, 1/8", ZC-23-3 Solid Split Bottom Load Collet 3mm (.125") For: DE-3, EGX300/EGX350/EGX400/EGX600

This 3mm Collet (Product #ZC-23-3) is for use with bottom loading end mills. It is compatible with the following Roland devices: JWX-10, EGX-300/400/600, MDX-40, and SRM-10.

More Info
1/15/2015
RRZC233
ZC-23-3
0.5 lbs
$74.95
Collet, 1/8", ZC-23-3175 Solid Bottom Load Collet 3mm (.125")
Collet, 1/8", ZC-23-3175 Solid Bottom Load Collet 3mm (.125")

Collet, Split, Top Load Collet 3.175mm PNC2300A (1,8") For: EGX300/ EGX350/EGX360

This 3.175mm Collet (Product #ZC-23-3175) is for use with bottom loading end mills. It is compatible with the following Roland devices: JWX-10, EGX-300/400/600, MDX-40, and SRM-10.

More Info
1/16/2015
RRZC233175
ZC-23-3175
0.5 lbs
$74.95
Collet, 11/64" Solid Bottom For: DE3/EGX350/EGX400/EGX600
Collet, 11/64" Solid Bottom For: DE3/EGX350/EGX400/EGX600

Collet, 11/64", Solid Bottom Load Collet 4.36 MM (.171") 

For: DE3/EGX350/EGX400/EGX600, Half Round Cutters

This Collet Holder (Product #1000003391, alternative to discontinued # 21655242) is used with standard cutting tools in the EGX-350. It should not be used with pass-through collets. This holder prevents the cutting tool from dropping through the spindle and damaging the engraving material.

More Info
1/16/2015
RR1000003391
1000003391
0.5 lbs
$182.95
Collet, 11/64", ZC-E436 Solid Bottom Load Collet (.171")
Collet, 11/64", ZC-E436 Solid Bottom Load Collet (.171")

Collet, 11/64", ZC-E436 Solid Bottom Load Collet (.171") For EGX300\EGX350\PNC-2300A\EGX400\600, Burnishing - Diamond Guide

This Bottom Loading Burnished Guide (Product #ZC-E436) is intended for use with the Roland EGX-Series engravers. The guide is designed for diamond drag applications and must be used with diamond engraving burnishing tools.

More Info
1/16/2015
RRZCE436
ZC-E436
1 lbs
$44.95
Collet, 6mm for EGX-300/EGX350/EGX400/EGX600600, JWX-10, MDX-40
Collet, 6mm for EGX-300/EGX350/EGX400/EGX600600, JWX-10, MDX-40

Collet, 6mm for EGX-300/EGX350/EGX400/EGX600600, JWX-10, MDX-40

This 6mm Collet (Product #ZC-23-6) is for use with bottom loading end mills. It is compatible with the following Roland devices: JWX-10, EGX-300/400/600, MDX-40, and SRM-10.

More Info
1/16/2015
RR-ZC236
ZC-23-6
$45.00
Compressor for Air Assist-High Volume, 110Vac,3.18 CFM
Compressor for Air Assist-High Volume, 110Vac,3.18 CFM

Compressor for Air Assist-High Volume, 110Vac,3.18 CFM

A specially designed Air Compressor for laser engravers, by using an oil-less diaphragm, you help eliminate the harmful and damaging side effects of moisture on the laser optics. Also, provides the optimal air pressure your laser needs to blow away vaporized particles and helps prevents overheating. A must to keep lenses and mirrors clean to promote longer laser life. Recommended for production enviroments where laser will be operating eight (8) hours or more.

SPECS:
Voltage:100~115vac
Power Consumption:270Watt
Hz:50/60
Air capacity:86~95 L/min
Outlet pressure is 7~10 kg/cm2 (100~142psi)

More Info
12/17/2013
MGA-29001054G
29001054G
1.2
21 lbs
$600.00
up
Jorlink USA, Inc,
3714 Alliance Dr., Suite 100
Greensboro, NC 27407
TEL: (336) 288-1613
eMail: sales@jorlink.com

M-F 9am-5pm EST 
Facebook Linkedin twitter Instagram YouTube
Jorlink USA, Inc. BBB Business Review