Premium Black, 250grams
Use: Marking Material for Glass and Ceramics

NOTE: By the conclusion of 2024, the LMC-6044P Paste will be substituted with the ULTRA Paste. The ULTRA Paste is specifically designed for marking on ceramic substrates and has been utilized for laser marking ceramics for the past three years with excellent results.

LMC6044P is recommended for creating black marks on glass and ceramic substrates. It makes darker black marks on these substrates than the older LMC12. LMC6044P dries quickly as a dark grey powder-like coat and is easy to wash after marking. The coat can be smudged or wiped off prior to laser marking, however, so LMC6044P should be marked shortly after application. 

SDS CerMark LMC6044P

Weight: 1000grams
Use: Stainless Steel, Aluminum, Brass & Other Hard Metals
HTS Code: 320710000000

LMM14 is one of TherMark’s two general-purpose laser marking inks and is recommended for creating a black mark on most metals. The combination of its flexible process window and wide range of applicable substrates makes LMM14 an extremely easy product to use. In general, if you are looking for one laser marking product to keep on your shelf, we recommend LMM14.

LMM14 dries quickly as a light-gray powder coat and is extremely easy to wash after laser marking. This coat should not be extensively handled prior to laser marking, however, so LMM14 should be marked shortly after application.

 SDS For Cermark LMM14 Paste

 LMM14  coverage

Weight: 250grams-.55Lbs
Use: Stainless Steel, Aluminum, Brass & Other Hard Metals, ~5000SQ" Coverage
HTS Code: 320710000000

 SDS For Cermark LMM14 Paste

 LMM14  coverage

LMM6000- 1000grams is on backorder until Nov. 18th 2022

Weight: 1000grams
Use: Stainless Steel  & Pewter

LMM6000, a CerMark™ product, is one of TherMark’s two general-purpose laser marking inks and is recommended for creating black marks on a variety of metals. LMM6000 has been specially designed to dry in a hard coat which can be handled prior to laser marking without rubbing off. This allows parts coated with LMM6000 to be stored, moved, or stacked prior to laser marking. 

SDS For Cermark LMM6000

 LMM-6000 coverage

Weight: 250grams
Use: Stainless Steel  & Pewter

LMM6000, a CerMark™ product, is one of TherMark’s two general-purpose laser marking inks and is recommended for creating black marks on a variety of metals. It has been specially designed to dry in a hard coat which can be handled prior to laser marking without rubbing off. This allows parts coated with the product to be stored, moved or stacked prior to laser marking.

SDS For Cermark LMM6000

SDS (Spanish Doc). For Cermark LMM6000  

 LMM-6000 coverage

Tape Notes: Black Marking, for Metal, 2"x 6"  Sheet  2.0 oz
Export Notes: HTS#: 3824.99.9297

LMM6018 instructions Download

Cermark Tape SDS Document

Tape Notes: Black Marking, for Metal, 3"x 6"  Sheet  2.0 oz
Export Notes: HTS#: 3824.99.9297

LMM6018 instructions Download

Cermark Tape SDS Document