For GCC Laser Models Mercury I, II, III (5206e / 5272 v1, v2 MB)  (Before 29001191G)

* Includes Top DU Rollers and Bottom Wheels
** DOES NOT include optics

For: GCC Models Spirit SLS\S290LS (Before Serial #: I50790)

For Models Spirit Si & SGE Before Serial #: I50790

For Models Spirit Si & SGE After Serial #: I50790

Carriage, Lens Carriage Assembly w/o Lens and Mirror (Before SN: I50790), Spirit GX

CerMark LMC6044P
Premium Black, 1000grams
Use: Marking Material for Glass and Ceramics

NOTE: By the conclusion of 2024, the LMC-6044P Paste will be substituted with the ULTRA Paste. The ULTRA Paste is specifically designed for marking on ceramic substrates and has been utilized for laser marking ceramics for the past three years with excellent results.

Recommended substrates:

LMC6044P material can mark a range of glass and ceramic substrates. It has previously been used to mark many different types of glass in industrial applications such as vehicle windshields, laboratory instruments, plate glass, and glass ampoules. It can also be used for decorative work on bottles, wine glasses and awards. Additionally, it has found uses on ceramic products such as porcelain sanitary ware, electronic substrates, and for decorating wall and floor tiles.

LMC6044P is recommended for creating black marks on glass and ceramic substrates. It makes darker black marks on these substrates than the older LMC12. LMC6044P dries quickly as a dark grey powder-like coat and is easy to wash after marking. The coat can be smudged or wiped off prior to laser marking, however, so LMC6044P should be marked shortly after application.

SDS CerMark LMC6044P

 LMC6044P coverage

Premium Black, 250grams
Use: Marking Material for Glass and Ceramics

NOTE: By the conclusion of 2024, the LMC-6044P Paste will be substituted with the ULTRA Paste. The ULTRA Paste is specifically designed for marking on ceramic substrates and has been utilized for laser marking ceramics for the past three years with excellent results.

LMC6044P is recommended for creating black marks on glass and ceramic substrates. It makes darker black marks on these substrates than the older LMC12. LMC6044P dries quickly as a dark grey powder-like coat and is easy to wash after marking. The coat can be smudged or wiped off prior to laser marking, however, so LMC6044P should be marked shortly after application. 

SDS CerMark LMC6044P

Weight: 1000grams
Use: Stainless Steel, Aluminum, Brass & Other Hard Metals
HTS Code: 320710000000

LMM14 is one of TherMark’s two general-purpose laser marking inks and is recommended for creating a black mark on most metals. The combination of its flexible process window and wide range of applicable substrates makes LMM14 an extremely easy product to use. In general, if you are looking for one laser marking product to keep on your shelf, we recommend LMM14.

LMM14 dries quickly as a light-gray powder coat and is extremely easy to wash after laser marking. This coat should not be extensively handled prior to laser marking, however, so LMM14 should be marked shortly after application.

 SDS For Cermark LMM14 Paste

 LMM14  coverage

Weight: 250grams-.55Lbs
Use: Stainless Steel, Aluminum, Brass & Other Hard Metals, ~5000SQ" Coverage
HTS Code: 320710000000

 SDS For Cermark LMM14 Paste

 LMM14  coverage