Main Board for Roland SV-12 & SV 8 Vinyl Cutter Stika
MODEL | SV-15 | SV-12 | SV-8 | |
---|---|---|---|---|
Cutting method | Media-moving method | |||
Maximum cutting area | 13-3/8 (X) x 39-5/16” (Y) [340 (X) x 1000mm (Y)] |
9-13/16 (X) x 39-5/16” (Y) [250 (X) x 1000mm (Y)] |
6-1/4 (X) x 39-5/16” (Y) [160 (X) x 1000mm (Y)] |
|
Acceptable sheet size* | Width: 14-1/8 to 15” (360 to 381 mm) Length: 43-1/4” (1100mm) or less |
Width: 11 to 12” (280 to 305mm) Length: 43-1/4” (1100mm) or less |
Width: 7-13/16 to 8-7/16” (200 to 215mm) Length: 43-1/4” (1100mm) or less |
|
Cutting speed | 7/16 to 3-7/8ips. (12 to 100 mm/sec.) |
7/16 to 1-9/16ips (12 to 40 mm/sec.) |
7/16 to 1-9/16ips (12 to 40 mm/sec.) |
|
Acceptable material | PVC or label material of 0.004” (0.1 mm) or less in thickness. Total material thickness including the backing of0.012” (0.3 mm) or less | |||
Interface** | >USB 1.1 | |||
Power supply | Dedicated AC adapter input: AC 100V +/- 10%, 50/60Hz 1.7A Output: DC 19 V 2.1 A | |||
External dimensions | 20-5/8(W) x 8-1/8(D) x 4-1/2”(H) [522(W) x 205(D) x 115(H)mm] |
17-3/8(W) x 8-1/8(D) x 4-1/2”(H) [440(W) x 205(D) x 115(H)mm] |
13-3/8(W) x 8-1/8(D) x 4-1/2”(H) [340(W) x 205(D) x 115(H)mm] |
|
Power consumption | Aprox. 20W (including AC adapter) | |||
Weight (unit only) | 7.3 lb [3.3 kg] | 6 lb. [2.7 kg] | 4.9 lb. [2.2kg]< | |
Acoustic noise level | 60 dB (A) or less (According to ISO 7779) | |||
Operating environment | Temperature: 41 to 104 °F [5 to 40 °C] Humidity: 35 to 80% non-condensing |
|||
Included items | AC adapter, power cord, USB cable, replaceable blade protector, blade, blade holder, pin, material for test cuts, application tape for test cuts, Roland Software Package CD-ROM (CutStudio design software, plug-ins for CorelDraw 10, 11,12 and Adobe Illustrator 9, 10, CS, Stika Windows Navi utility), SV-15/12/8 user's manual |
*Depending on the type of material, lengths longer than 19-5/8” [500mm] may shift during cutting.
**Compatible with Windows 98 SE/Me/2000/XP and Mac OS 9 or later.
Three STIKAs
The STIKA comes in three models. The SV-8 accepts 8.5-inch wide media and cuts up to 6.2 inches wide. The SV-12 accepts 12-inch wide media and cuts up to 9.8 inches wide. The SV-15 accepts 12- or 15-inch media and cuts up to 13.3 inches wide. They all handle vinyl, paint mask, reflective vinyls, twill, heat transfer, and etching material.
Print/Cut Solution
In addition to cutting vinyl and other materials, the new STIKA makes an easy-to-use and cost-effective print/cut solution. Users print registration marks with their desktop printer, load the printed graphic into the cutter, send the file to the STIKA and it contour cuts the graphics. It's perfect for creating colorful POP displays, and iron ons.
CutStudio Software
Every STIKA ships with Roland CutStudio. This powerful design software lets you reduce, re-position, rotate, tile and mirror images. It enlarges images as crisp as original size and cuts TrueType fonts without outlining. CutStudio also supports BMP, JPG, STX, AI, and EPS file formats. Plugins for Adobe Illustrator (Mac and PC) and Corel Draw (PC) are also included.
Easy to Use
Making professional-looking graphics is a snap with the STIKA. Simply design your graphics with bundled Roland CutStudio software, peel away the excess vinyl, and apply. It’s that easy. You can even contour cut printed graphics using your desktop printer and the STIKA driver.
Connectivity
With a convenient USB port, the STIKA offers plug-and-play capabilities for both Mac and PC systems. The USB cable is included!
Roland Reliability
Roland cutters have earned worldwide reputation for reliable performance and outstanding results. Today, like all Roland products, they come with an international ISO certification. This signals Roland’s commitment to offering top quality products backed up with first-rate customer service and a wide variety of supplies and accessories.
Over the past 17 years, Roland has sold more than a quarter million vinyl cutters worldwide. Most of them are still in production today.
One-Year Limited Warranty
Every STIKA Desktop Vinyl Cutter is backed up by a one-year limited warranty covering manufacturer’s defects and malfunctions attributed to premature failure of individual components or the entire device. For complete terms and conditions, please visit theRoland Care page.
Application/ Software Guides |
|
|
This is an HTML-based product guide for CAMM-1 Pro and CutStudio functions. This .exe file can be unzipped and installed to your desktop. |
3.51 MB |
|
This zip file includes the installer for the Roland GX-24 operation manuals. Manuals include the CutStudio Plugin setup guide, print and cut guide and a general reference guide for the GX-24. |
3.74 MB |
|
This is an installer for STIKA Windows Advanced Guide. Follow the instruction of "readme.txt" for installation instructions. |
3.36 MB |
|
This is a cutting guide for Macintosh. Follow the instruction of "readme.txt" for installation. |
190 KB |
|
|
|
|
Drivers |
|
|
Windows 2000 |
|
|
[Model] : STX-7, STX-8, SX-8, SX-12, SX-15, SV-8, SV-12, SV-15 [OS] : Windows2000, WindowsXP |
26 KB |
|
Windows 7 |
|
|
[Model] : SV-15, SV-12, SV-8 [OS] : Windows7 This driver is a beta version, not an officially released version. |
26 KB |
|
[Model] : SV-15/12/8 [OS] : Windows7(x64), Vista(x64), XP(x64) This driver is a beta version, not an officially released version. |
26 KB |
|
Windows 8 |
|
|
Stika Driver for Windows 8, ver 1.10 (32-bit ONLY) Models: SV-8/12/15 Please use "SETUP.exe" in the extracted folder. Please refer to "readme.txt" for installation. |
5.05 MB |
|
Stika Driver for Windows 8, ver 1.10 (64-bit ONLY) Models: SV-8/12/15 Please use "SETUP64.exe" in the extracted folder. Please refer to "readme.txt" for installation. |
5.6 MB |
|
Windows 95/98 |
|
|
[Model] : STX-7, STX-8, SX-8, SX-12, SX-15, SV-8, SV-12, SV-15 [OS] : Windows95, Windows98, WindowsMe Please follow the instruction described in "readme.txt" for installation. |
26 KB |
|
Windows Me |
|
|
[Model] : STX-7, STX-8, SX-8, SX-12, SX-15, SV-8, SV-12, SV-15 [OS] : Windows95, Windows98, WindowsMe Please follow the instruction described in "readme.txt" for installation. |
26 KB |
|
Windows <st1:place w:st="on">Vista |
|
|
[Model] : SV-15/12/8 [OS] : Windows7(x64), Vista(x64), XP(x64) This driver is a beta version, not an officially released version. |
26 KB |
|
[Model] : SX-8, SX-12, SX-15, SV-8, SV-12, SV-15 [OS] : WindowsVista |
26 KB |
|
Windows XP |
|
|
[Model] : STX-7, STX-8, SX-8, SX-12, SX-15, SV-8, SV-12, SV-15 [OS] : Windows2000, WindowsXP |
26 KB |
|
[Model] : SV-15/12/8 [OS] : Windows7(x64), Vista(x64), XP(x64) This driver is a beta version, not an officially released version. |
26 KB |
|
|
|
|
Extended warranty |
|
|
Protection Plus Extended Warranty Enduser Price Guide_Specialty_RCare |
Pricing as of 5/3/2012 |
283 KB |
|
|
|
Owner/ User Manual |
|
|
SV-15-12-8 Manual del Usuario. SV-15-12-8 User's Manual, Espanol. |
2.08 MB |
|
Users manual for Stika vinyl cutter models SV-8, SV-12 and SV-15 |
1.4 MB |
|
|
|
|
Setup/ Install Guides |
|
|
This document covers CutStudio Driver Installation, CutStudio Software Installation, CutStudio Plug-in Installation and CutStudio Software Overview |
1.82 MB |
|
The following document outlines how to setup the proper permissions for the Roland CutStudio to output Adobe Illustrator cut data properly for users who are not the primary accounts on a Macintosh or who do not have administrative permissions. |
284 KB |
|
Stika Port Test Guide for Roland Stika Vinyl Cutters |
82 KB |
|
This document outlines the procedures to install a Roland driver in Windows 7 and Windows Vista. |
239 KB |
|
|
|
|
Software Updates |
|
|
This is a plug-in for Roland CutStudio on Adobe Illustrator CC/CS6/CS5/CS4. Download the exe file, and extract it. Follow the instruction described in "readme.txt" in the extracted folder. |
2.6 MB |
|
Download the exe file, and extract it. Follow the instructions described in "readme.txt" in the extracted folder. This plug-in works with CorelDRAW version X3, X4, X5 and X6. |
12 KB |
|
CutStudio plugins installer for Windows operating system. Adobe Illustrator and CorelDraw plugins included. Please use "PluginSetup.exe" |
443 KB |
|
CutStudio_AI-PlugIn_for_Mac_ver170 This is a plug-in for Roland CutStudio in Adobe Illustrator CC/CS6/CS5/CS4. Download the file, and extract it. Follow the instruction described in "readme.txt" in the extracted folder |
4.94 MB |
|
CutStudio_ver151 Updater |
4.78 MB |
|
Dr. Stika Plus sign software package. |
1.92 MB |
|
This file is for updating CutStudio to the latest version. You need to have Roland CutStudio already installed. Download the exe file, and extract it, then, click "updater.exe" to follow the instruction as displayed. |
3.63 MB |
|
|
|
|
Training videos |
|
|
Using the CutStudio plugin with Adobe Illustrator for print/cut applications with a 3rd party RIP and/or 3rd party printer. Designed for use with a GX cutter. |
28 KB |
|
Follow this link to the Roland Academy Webinar Series. Once there you can sign up for any of our upcoming webinars or view our recorded archive library! |
25 KB |
|
The following video outlines how to install a Windows 7 compatible USB driver via the plug and play method. |
23 KB |
|
The following video outlines how to install a true Windows 7 print driver using the pre-installation method. |
23 KB |