Pre filter cyclone for dust collectors

Acts as a dust separator and pre filter cyclone that pushes debris and dust to the bottom container

Features:

• Easily Integrates Into Any Dust Collection System
• 5 Gallon Removable Debris Capture Bucket
• Highly Durable Molded Resin Design
• Scientifically Tested and Proven to Separate Dust
  • A 3M/Georgia Tech Study
• Up To 97% Cyclonic Separation Rate of Particles Down to .3 Microns
• 95% Effective at Precious Metal Reclamation
• Inlet/Outlet Ports – OD: 4″- ID: 3.75″

22801275G, Coverlid, Top Clear PV Lid for Spirit GE Laser, ROHS Std's (Window ONLY- NO hinges)

Bag, Vacuum Filter Bag (3-pk) for Chip Removal System
Filter bag (3-pk) for chip removal system
PRODUCT NUMBER: US-FLTRBAG-A3
This product #US-LN10 is a set of 3 replacement filter bags for the Chip Extraction System (Product #US-CHIPSYS-C). The Chip Extraction System is used with EGX-20/30/30A, EGC-350/360, EGX-400/600 and DE-3 engravers.

Bag, Vacuum Filter Bag (5-pk) for Chip Removal System
Filter bag (5-pk) for chip removal system
PRODUCT NUMBER: US-FLTRBAG-A5
This product #US-LN10 is a set of 5 replacement filter bags for the Chip Extraction System (Product #US-CHIPSYS-C). The Chip Extraction System is used with EGX-20/30A, EGC-350/360 and EGX-400/600 engravers.

Bag, Vacuum Filter Single Bag (1-pc) for Chip Removal System
Filter bag (1-pc) for chip removal system
This product single replacement filter bag for the Chip Extraction System (Product #US-CHIPSYS-C). The Chip Extraction System is used with EGX-20/30A, EGC-350/360 and EGX-400/600 engravers.

Bearing Assy. EGX30, EGX30a or CS-20, (3-Pack)

Bearing Kit, Six (6) Bearings for Meistergram\H2 Machines (4 End Carriage-X & Y-axis & 2-Z-Axiz, Savings of 25%+ with Kit) MSRP $108

Bearing, End Carriage, X & Y-axis, Ball-Radial, Flush, .875"OD, .312"ID, .343" THK Each (All Meistergram \ HSquare Machines)

Belt, Drive, Timing, 40 DP 230 Tooth, .250 WD (DM2818C)

Belt, Roland Spindle CS-20\EGX-20, EGX-30 (3*347K)

* Roland has discontinued support and spare parts for EGX-20 and EGX-30 Models.  Please call us as Jorlink will attempt to locate and assist with legacy products and parts needs.  Email us to support@jorlink.com with your company data, machine model and images of product required.​

Belt, Roland Spindle EGX30A (MARU3X314K)

Belt, X-axis Carriage Belt, Long-Open  (1036-2GT-10, Venus, 41"L)

Belt, X-axis Carriage Belt, Long-Open For: Spirit, S290, SGX-Y axis, BL01801A (2GT-1850-12, 72.8"L)

Belt, Y-axis Carriage Belt, Long-Open For: Venus (T382-2GT-12) BL01502B

Belt, Y-Axis Roland EGX600 (150S2M569LW-C)

Braille 2 Grade System Raster Pen License Kit

Video Links:
https://youtu.be/BSUGmVUt0zU
https://youtu.be/OfKhqOTKm2E?https://youtu.be/OfKhqOTKm2E?https://youtu.be/OfKhqOTKm2E?https://youtu.be/to4etQYO93k?list=PL2V2wMRPhoNPPFnrdBFvPWoFy8Pryegav

To register your ADA Braille Pen Device, click here.

Brushes, Motor, Roland Vacuum Chip Removal System

Burnisher, .005 Tip, 11/64" Dia. x 6.5" LG

Burnisher, .010 Tip, 1/8" Dia. x 4.5" LG For Roland Engravers, BT-125-010

Rotary Tools – Cutters Brochure Specs

Burnisher, .010 Tip, 11/64" Dia. x 6.5" LG

Burnisher, .015 Tip, 1/8" Dia. x 4.5" LG For Roland Engravers, BT-125-015

Rotary Tools – Cutters Brochure Specs

Burnisher, .015 Tip, 11/64" Dia. x 6.5" LG

Cable, Auto Focus Cable Flat Ribbon, 8 Pin For: Spirit GLS\X380\S400 (59" Long, 1.0mm - 1500mm),  Cable Info: E357637, AWM20798

Cable, Auto Focus Cable Flat Ribbon, 8 Pin For: X252 & Mercury III, 43"\1100mm Long -  FAC8-1100, Cable Info: 5/5/10/10, AWM2896 (Alternative Shorter Cable as 20901519G)

Cable, Auto Focus Cable, Braided 2S for Explorer for (CN00973) HTS 8466.93.9585

Cable, Auto Focus Cable, Braided 3S For  Spirit Si/LS/S290 (52" Long, before SN: K50114) HTS 8466.939585

Cable, Auto Focus Cable, Braided-2S  For: Mercury-ALL, X252 (39" Long) HTS: 8466.93.9585

Cable, Auto Focus Cable, Braided-2S For: Venus( 600mm, 23.6" Long), HTS: 8466-93-9585

Cable, Auto Focus Cable, Braided-3S For C180, HTS 8466.93.9585

Cable, Auto Focus Cable, Braided-3S, To AF Seat & PCB For Spirit Models (100mm,  4"  Long) HTS 8465.93.9585

Cable, Auto Focus Cable, Flat Ribbon, 8 Pin for C180-II (33.4" or 850mm "L) HTS 8466.93.9585

Cable, Auto Focus Cable, Flat Ribbon, 8 Pin, For: Spirit SLS , 48"L. 120mm long- After SN: K50114) FAC8-1220(05/5/10/10)(2896)

Cable, Auto Focus Cable,Braided-3S Spirit GX & GE / X380 (64" Long,) HTS 8466.93.9585

Cable, Parallel Communication Cable, MCB to Chassis Short 350mm, Mercury I

Cable, Ribbon, Laser Control Panel Wiring to MCB (Mercury I, CN00230)

Cable, X-Motor Flat Ribbon, 12 Pin (SLS, SGLS, Si, SGX, SGE, X380, S290, S400, H230, MG380HYB, 1/2"W x 33.75"L-850mm,  AWM 20624, E244054)

Cable, X-Motor Flat Ribbon, 12 Pin, 30"L-760mm (C180-I, C180-II, Mercury, X252)

Cable, Y-Axis Motor to PCB (X380, Spirit Models, SY003-631/0132-516-135)

Chain, X-Tube Chain Track for Explorer/Spirit GX, SGLS, Houses AFCable & Air Line

Chain, X-Tube Chain Track for Mercury, X252, Houses AFCable & Air Line (07.10.018-23L-060.10.12)

Chain, X-Tube Chain Track for Spirit Si, SLS
Specs: 045.10.028-35L-045.10.12 total 37 links, MZ01819A

Chain, X-Tube Chain Track for X380, Houses AFCable & Air Line

Chain, X-Tube Track Chain for Venus, Houses AFCable & Air Line (ZZ01501)

Clamp, Pivot For Roland or Other Manufacturers Rotary Engravers

Cone Set, Rotary Adaptors (5) for GCC Laser, Includes Rotary Cones:
1-Rotary Flange Adapter 6mm, Metal $150
1-Rotary Cone 2.18od x 1.87od, Blue $55
1-Rotary Cone 2.50od x 2.12od, Red $55
1-Rotary Cone 2.95od x 2.44od, Maroon $55
1-Rotary Cone 3.50od x 3.00od,White $55
1-Rotary Cone 4.00od x 3.25od, Orange $55

Cone, Rotary Attachment Large Cone

Cone, Rotary Attachment Small Cone

Control Panel, LCD Assy PCB (Mercury 1\Venus 1)
***Limited New Quantities - Discontinued Item***

April 2019- DISCONTINUED ITEM, Limited New Item Quantaties, CALL US to see if we may have a Refurbished Unit at a reduced cost of $245

Cover, LED's Fluorescent Plastic Cover for Lamps (All Mach.)

22802382G Coverlid, Top Clear Acrylic Lid for C180 Laser (Acrylic ONLY- NO hinges)

Cover-Lid, Top Clear Acrylic Lid for Spirit LS, Mercury-III Laser (Acrylic ONLY- NO hinges)

22802103G Coverlid, Top Clear PV  Lid for Spirit GLS Laser (Window ONLY- NO hinges)

Cover-Lid, Top Clear PV Lid for Spirit GLS, SGX, X380, Laser, ROHS Std's
Before Machine Serial #: Q53475/Q53433/Q53435/Q53463/Q53437 (Includes: Window Support Bracket, Nut, Flat washer, the top chassis (blue color) for PC window is not compatible with glass window)

22802392G Coverlid, Top Clear PV Lid for Spirit GLS, SGX , X380, Laser, ROHS Std's (Window ONLY- NO hinges)

(HS-171-005K High Speed Steel Metal)

Without Knob (Roland C2-171-010K)

Rotary Tools – Cutters Brochure Specs

CH1254.010 Cutter .010 Tip, 1/2 Round, 1/8" Dia. x 4.5" LG for Roland Engravers, C2-125-010K, ZEC-A2025

Our most frequently used tool for engraving plastics and metals. Our cutters are made from Micrograin carbide with our exclusive MicroEdge® 

Rotary Tools – Cutters Brochure Specs

Without Knob (Roland C2-171-015K)

CH1254.015 Cutter .015 Tip, 1/2 Round, 1/8 Dia. x 4.5 inches for Roland Engravers C2-125-015K

Our most frequently used tool for engraving plastics and metals. Our cutters are made from Micrograin carbide with our exclusive MicroEdge® 

Rotary Tools – Cutters Brochure Specs

CH1254.020 Cutter .020 Tip, 1/2 Round, 1/8" Dia. x 4.5" LG for Roland Engravers, C2-125-020K

Our most frequently used tool for engraving plastics and metals. Our cutters are made from Micrograin carbide with our exclusive MicroEdge® 

Rotary Tools – Cutters Brochure Specs

Without Knob (Roland C2-171-025K)

Rotary Tools – Cutters Brochure Specs

Without Knob (Roland C2-171-030K)

Application: Engraving on Acrylic Plexiglas, Lexan Material, Phenolic Brass, Aluminum

Rotary Tools – Cutters Brochure Specs

Without Knob (Roland C2-171-040K)

Rotary Tools – Cutters Brochure Specs

Without Knob (Roland C2-171-045K)

Rotary Tools – Cutters Brochure Specs

Without Knob (Roland C2-171-050K)

Rotary Tools – Cutters Brochure Specs

Roland Cutter .070 Tip, 1/2 Round, 11/64 Dia. x 6.5 inches  w/o Knob  

Roland Cutter .075 Carb. Tip, 1/2 Round, 11/64" Dia. x 6.5" LG  w/o Knob

 Roland Cutter .080 Carb. Tip, 1/2 Round, 11/64" Dia. x 6.5" LG  with Knob

Rotary Tools – Cutters Brochure Specs

Without Knob (Roland C2-171-090K)

Rotary Tools – Cutters Brochure Specs

Roland Cutter .100 Carb. Tip, 1/2 Round, 11/64" Dia. x 6.5" LG w/o knob

Rotary Tools – Cutters Brochure Specs

w/o Knob (C2-171-125K)

Rotary Tools – Cutters Brochure Specs

Roland Cutter .140 Carb. Tip, 1/2 Round, 11/64" Dia. x 6.5" LG  with Knob

Rotary Tools – Cutters Brochure Specs

Roland Cutter .150 Carb. Tip, 1/2 Round, 11/64" Dia. x 6.5" LG with knob

Rotary Tools – Cutters Brochure Specs

Roland Cutter .171 Carb. Tip, 1/2 Round, 11/64" Dia. x 6.5" LG with Knob

Rotary Tools – Cutters Brochure Specs

Cutter Knob 1/8" For Roland Engraver
Manuf. #: C2-125-KNOB

Rotary Tools – Cutters Brochure Specs

Cutter, ADA Braille Cut-Out 1/64 Dia. x 6.5 inches

CBR1254.CO Cutter, ADA Braille Cut-Out 1/8 Dia. x 4.5 inches For Roland Machine C171COL020

Rotary Tools – Cutters Brochure Specs

Cutter, Beveler, 11/64" Dia. x 6.5" LG, for 1/16" Material

Rotary Tools – Cutters Brochure Specs 

Cutter, Beveler, 11/64" Dia. x 6.5" LG, for 1/8" Material

Rotary Tools – Cutters Brochure Specs 

Cutter, Braille Raster-Grade 2, 11/64" Dia. x 6.5" LG (PAR Tip 0.061" Accent Sig.) w/o Knob

* Use the 11/64" Raster® Braille Cutter to create Braille holes in plastic materials for ADA Braille Signs.

Rotary Tools – Cutters Brochure Specs

Cutter, Parallel, .060 Tip, 11/64" Dia. x 6.5" LG, PAR-171-060K

Cutter, Parallel, .090" Tip, 1/8" Dia. x 4.5" LG (ZEC-A2230 \ 2.29mm Tip, 3.175mm Dia., 114mm L)

Rotary Tools – Cutters Brochure Specs

Cutter, Parallel, .100 Tip, 11/64" Dia. x 6.5" LG (AC-171-E.100)

Rotary Tools – Cutters Brochure Specs 

Cutter, Parallel, .125" Tip, 1/8" Dia. x 4.5" LG (ZEC-A2320 \ 3.175mm Tip, 3.175mm Dia., 114mm L)

Rotary Tools – Cutters Brochure Specs

Cutter, Parallel, .171 Tip, 11/64 Dia. x 6.5 inches

Rotary Tools – Cutters Brochure Specs 

Diamond, 1/8" Dia. x 5" LG, 120DG w/o Brass Knob for Roland Engravers (Std Marking, Replaces: C2-125-DGK - ZDC-A2000)

Rotary Tools – Cutters Brochure Specs

Diamond-Burnisher 4 Facet, .005 Tip, 1/8" Dia. x 5" LG

Rotary Tools – Cutters Brochure Specs

Diamond-Burnisher 4 Facet, .005 Tip, 11/64" Dia. x 7" LG

Rotary Tools – Cutters Brochure Specs