CerMark Laser Marking Supplies

GCC 24100253G Shift-Lever Cam (Black) , Jaguar 

Side Support Left(Black) for GCC Expert 24

Side Support Right(Black) for GCC Expert 24

Slide Bracket for simple stand (CS only) Expert 24

Spark Notes: 100mm In-Line Compact
Machine Model: Analog Series

Export Notes:  HTS Code #:  8421.39.8015, Made in the UK-England
Freight Class: 125, NMFC# 069100-03

Serie of baffles in the box… Air slows down inside the box as the cross-sectional duct area is increased to allow for larger particulate in the air stream to drop out. Air in the duct also turns through the baffles several times, this allows the largest particulate (those capable of carrying thermal energy) to transfer their energy to the cooler baffles and turn off

Spark Notes: In-Line Cabinet
Machine Model: For Digital Series (200i, 300i, 400i, 400i-PVC, 800i)
Export Notes:  HTS Code #:  8421.39.8015, Made in the UK-England
Freight Class: 125, NMFC# 069100-03

Spindle, Roland EGX20, 1/8" Assy. (90 Day Warranty)

Spindle, Roland EGX30\EGX30a (CS20) 1/8" Assy.

Spindle, Roland EGX350, 1164" Assy. with Belt 
Note: After you replace the spindle, you need to run it without any load with no tool or Collet installed for approximately 20 minutes. (90 Day Warranty)

Spindle, Roland EGX400/600, 1164" Assy. w/o Collet or Micrometer (90 Day Warranty)

Note: After you replace the spindle, you need to run it without any load with no tool or collet installed for approximately 20 minutes at 15000-RPM

Sprinkler, Flame Sprinkler System for: Spirit  Si, SLS, SGLSHYB, Mercury (MSRP $714)
Laser cutting and engraving operations using the flame sprinkler system protects the operator, machine, and the work products from potential fire hazards. During the engraving process, flaming may occur when working with combustible or easily-flammable materials, such as paper or wood. The flame sprinkler system is an optional item that automatically ejects gas to extinguish flames when they reach 68°C/155°F moments after the onset of the fire.

Response element and temperature: Fusible alloy@68°C (155°F)
Working pressure range: 0.1-1.2Mpa
Bulked coupling: 1/2” PT
Recommended Gas: CO2/N2/Dry Powder

Square Bar, Jaguar 101