CerMark Laser Marking Supplies

Tape Notes: Black Marking, for Metal, 2"x50 ft Roll  10 oz
Export Notes: HTS#: 3824.99.9297

LMM6018 instructions Download

Cermark Tape SDS Document

Tape Notes: Black Marking, for Metal, 2"x 6"  Sheet  2.0 oz
Export Notes: HTS#: 3824.99.9297

LMM6018 instructions Download

Cermark Tape SDS Document

Tape Notes: Black Marking, for Metal, 3"x 6"  Sheet  2.0 oz
Export Notes: HTS#: 3824.99.9297

LMM6018 instructions Download

Cermark Tape SDS Document

Tape Notes: Black Marking, for Metal, 3"x50 ft Roll 1 lb
Export Notes: HTS#: 3824.99.9297

LMM6018 instructions Download

Cermark Tape SDS Document

DM5975-DuraBlack, Matte Black .020"- 12"x20"  With Adh. 
* Call us about GOV-GSA Discount if you are a military or Government agency
With DuraBlack™ Marking on Laser Markable Aluminum is possible without a protective topcoat. DuraBlack™ is the long-term solution to protecting your government or business assets for the entire life cycle of your equipment even in harsh operating environments.

• Matte Black
• With Performance Adhesive backing
• .020 Inch Thick
• 12 x 20 Inch Sheets
• 5 Sheets Per Box

OUTDOOR DURABLE CO2 LASER MARKABLE ALUMINUM.

DuraBlack is CO2 laser markable aluminum for durable, on-demand marking for harsh operating environments. In side-by-side tests, DuraBlack outperforms black anodized aluminum and laser markable acrylic tape in select applications. DuraBlack is resistant to sunlight (UV-radiation), abrasion, high-temperatures, salt-spray and chemical exposure. Because of its ability to perform across a range of challenging environments, DuraBlack meets several government, industrial and military specifications including MIL-STD 130N, A-A-50271 (≈MIL-P-514D) and MIL-STD-15024F, Type L.

Composed of a multi-level coating on anodized aluminum, DuraBlack can be attached to either curved or flat surfaces with adhesive, rivets or screws. It is imaged with any CO₂ marking laser to produce a durable, high-resolution barcode or human-readable image.

DM05977-DuraBlack, Matte Black .020"- 20"x24" With Adh.

Premium Black, 250grams
Use: Marking Material for Glass and Ceramics

NOTE: By the conclusion of 2024, the LMC-6044P Paste will be substituted with the ULTRA Paste. The ULTRA Paste is specifically designed for marking on ceramic substrates and has been utilized for laser marking ceramics for the past three years with excellent results.

LMC6044P is recommended for creating black marks on glass and ceramic substrates. It makes darker black marks on these substrates than the older LMC12. LMC6044P dries quickly as a dark grey powder-like coat and is easy to wash after marking. The coat can be smudged or wiped off prior to laser marking, however, so LMC6044P should be marked shortly after application. 

SDS CerMark LMC6044P

CerMark LMC6044P
Premium Black, 1000grams
Use: Marking Material for Glass and Ceramics

NOTE: By the conclusion of 2024, the LMC-6044P Paste will be substituted with the ULTRA Paste. The ULTRA Paste is specifically designed for marking on ceramic substrates and has been utilized for laser marking ceramics for the past three years with excellent results.

Recommended substrates:

LMC6044P material can mark a range of glass and ceramic substrates. It has previously been used to mark many different types of glass in industrial applications such as vehicle windshields, laboratory instruments, plate glass, and glass ampoules. It can also be used for decorative work on bottles, wine glasses and awards. Additionally, it has found uses on ceramic products such as porcelain sanitary ware, electronic substrates, and for decorating wall and floor tiles.

LMC6044P is recommended for creating black marks on glass and ceramic substrates. It makes darker black marks on these substrates than the older LMC12. LMC6044P dries quickly as a dark grey powder-like coat and is easy to wash after marking. The coat can be smudged or wiped off prior to laser marking, however, so LMC6044P should be marked shortly after application.

SDS CerMark LMC6044P

 LMC6044P coverage

See all LBT products

Liquid Ink for Blackening

Laser Marked Surfaces

* Satisfaction Guarantee

LaserBond™ 100 Liquid Ink is a concentrated formulation for application using manual brush-on techniques, air brushing, industrial spraying, pad printing or screen printing. It is a water-based product and should be diluted 1:1 with ethanol for brush-on application using either a foam or bristle brush and for pad or screen printing. For application with air brushing or industrial spraying equipment, it should be diluted 2:1 with ethanol to provide the proper consistency.

AlumaMark, Satin Brass .020" - 12"x20" With Adh. (5 Sheets per Box, 1 Box)

Laser Markable Aluminum in Satin-Brass, 5 Sheets Per Piece Ordered

• Thickness 0.020 Inches
• Size 12x20 Inches
• Adhesive Backed

Brass, Black Laserable Brass Gloss 12" X 24" .016" (Black Front\Gold Background)

Laserable Brass is recommended for laser engraving, although diamond drag or burnishing will also work. Lettering will be gold.

Recommended laser settings: Speed ~ 100 Power ~ 60 (35 watt laser)

Engraveable? Yes
Sublimatable? NO
Laserable? YES
For Outdoor Use? NO

• Thickness 0.016" Inches
• Size 12"x20" Inches
• No Adhesive Backed

A2033 Satin, Anodized Black Aluminum 12" X 24" .025" Sheet (1pc)

 Laser Markable Aluminum Satin-Bronze

• 5 Sheets Per Piece Ordered
• Thickness 0.020 Inches
• Size 12x20 Inches
• No Adhesive Backed

AlumaMark, Satin Silver .005" - 10"x12" With Adh. (5 sheets per Box, 1 Box)

• 5 Sheets Per Piece Ordered
• Thickness 0.005 Inches
• Size 10x12 Inches
• Adhesive Backed

DM5973-DuraBlack, Matte Black .005" - 10"x12" With Adh.