Rotary Accessories

Lubrication, 1.75oz, DS-ES For Teflon Coated Leadscrews (Servo & Stepper Meistergram\HSquare Engraving Machines, GCC LaserPro & Others)

Lubricant, Super Lube 51010, Lubrication for Engraving Machines (Laser, Z-Axis Table Leadscrews)

Micrometer, Ring Dial Set-Spindle for EGX350, DE3

Motor, Replacement Motor – 97047 (Replaced Blue Dot # 97005 & 97038)
For: RRUSCHIPSYSC 

Motor, Servo Assy, X,Y, Z-axis 48V (DM2412, DM2818)

Motor, Stepper, 1.88 Amps, 6vdc, 1.8d, 1612-2412-WB2818  X-Y Axis (Same as R6009014 & R4610017, PH2610-01)

RR22435425 Motor, XY Axis EGX400 / EGX600 24DCv

RR22435426 Motor, Z Axis EGX400 / EGX600, Roland Rotary

Roland DGA EGX350

Z-axis Motor

MultiMat-Seklema-White, 12"x12" (30.5cm) DOUBLE Sided, Engraving Table Hold Down Mat

MultiMat, SEKLEMA Engraving Table Hold Down MAT, 12"x24" Double Sided

Nut, Leadscrew, 1/4P, 2S Anti-backlash, New Syle Nut One pc, 2" L, Triangle-Black (1912XY, 1612XY, 2412XY, 2818XY)
* Previous\original nut was 2 piece Orange, this is no longer available.

Nut, Leadscrew, 1/4P, 2S, Anti-backlash, Flanged Mount, 2Pc's Nut, 2" L, Triangle-Orange (1912H2XY, 2818H2XY)

Nut, Leadscrew, 1/4P, 3S Anti-backlash, 2Pc's (PA912XY  & 912S XY-axis, Requires Rental Special Nut TOOL to remove and Install, rental fee $25)

Nut, Leadscrew, Threaded, 1/2P, 4S (1612Z, 2412Z, WB2818Z, C2818Z, Servo Z)

Nut, Leadscrew, Z-axis 1/2P, 4S, Flange Mount (912Z, PA9Z, WB2818Z-Old)-New Style

This Ring Chuck (Product #ZRC-36) is used to securely fasten rings in the EGX-360. The chuck ensures accuracy while engraving on the inside and outside of rings.

Sensor, PCB Assy, Home Switch X-Y Axis for Meistergram\H2 Servo

Roland SRM-20 Compact Mill \ Engraver
Working Area: 8"x6"x2.38", Spindle: 1/8" & 1/4"

SRM-20 Kit

Includes:

Vectric software SRM-20 , Diamond Drag , Tooling , V-Bit Tooling , 1/4” and 1/8” Collets , Bed Offset Hardware , Indexing Fixture , Centering Vise , AS-10 Sheets

Swatch Book, IPI Plastics Sample Book

Includes: Sample Chips (1" Squares) of Each IPI Rotary and Laser Color Options, Engraved Samples

Switch, DE3 Top Cover Limit Switch 1000022198

Switch, Limit, Straight Lever, (912XYZ, 19XYZ, 2818XY)

This T-Slot Table (Product # ZTT-35) is an optional accessory for use with third party vises and fixture. This table is compatible with the EGX-350 an DE3

Table, Vacuum Table (Product # ZV-23A) is an optional accessory for use with the Chip Extraction System (Product #US-CHIPSYS-C). This table is used as an alternative to adhesive sheets for holding down flat plastic material and is compatible with the EGX-350 engraver

Instructions

Vacuum, Chip Extraction Sys. UltraQuiet, 1/2hp w/accumulator

Key Features

• This chip removal system is quiet and efficient to use in any shop.
• The vacuum not only keeps your works space clear of debris, but it also filters 99.99% of dust out of the air!
• The systems are also self-contained so it can be used to reclaim precious metals.
• The vacuum hose supplied slips onto the vacuum connection on top of the unit and the other end connects to the collection device desired.
• The ideal location for the US-CHIPSYS-C is under the bench where the user works.

US-CHIPSYS-C Specifications

• Usage: Single station use for collecting dust at 1.5” diameter workstation
• Speeds: Single Speed
• Size: 14.Lx10.Wx12.H
• Power Requirement: 115 VAC 5A
• Overload Protection: Resettable circuit breaker included.
• Sound rating: 53db on High
• Dust Collection: Collects 99.99% of all dust (filter rated at 95% @ 1 micron)
• Motor Rating: High-Performance ½ Horsepower Motor

Wrench, EGX-350 Spanner Wrench Tool (2 sided)

* This Tool Spanner (Product #21935111) is used to install and tighten collets within the spindle. This spanner is intended for use with the EGX-350 and EGX-400/600 engravers.

Wrench, Tool Spanner 6-14 CS-20/EGX-30/EGX30a/EGX20

* This Tool Spanner (Product #21935115) is used to install and tighten collets within the spindle. This spanner is intended for use with the EGX-20 engraver.