Vinyl Cutters

GCC-245000990G Power Supply 150W 40V/3.8A (HRP-150-40GC) Model E200

Power Supply Unit, Roland EGX400\600, ZWS150PAF-36/J SP-300/VP-540/JWX-10 (Schematic Part# 38, Previous # 12429114)

For: GCC Expert 24/52 & Sable Vinyl Cutters

65W/2 Output Switching PS (24/2A 5V/3.5A, PD-65B)

Power Supply,  Board Aux.-Yellow 12vdc, 150w, LPP-150-12GC,  (Spirit SI,SGE, SGX, Gaia, Explorer For Fans, Red LED, LED's)

Power Supply, HY-DY13 High Voltage Power Supply (for 100W CO2 Glass tube, X380RX, X500RX)

Power Supply, Laser Tube PS (Rici Tube 130w-150w, Positive High Voltage DY-20, X500RX)

* Previous part #: LGCC-245000940G

Power Supply, Laser Tube PS RSP-2400-48 2400W 48V/50A ( for Ti100, SN after K51416) , S400 80GT-120GT

Power Supply, Laser Tube PS SLS60w, C180-I 40w Coherent (RSP-1000-48, Synrad Ti60, Machine After Serial #: K51416) 

Power Supply, Laser Tube PS X252 80w Co2 Glass Tube (HY-DY10 High Voltage)

Power Supply, Laser Tube PS, 30vdc (Synrad T-series T60, T100 for Gaia/Explorer/SGX, Machines After Serial # J50682, RSP-1500-27, ) with 2 Cables

Power Supply, Main Board, 40/5v (Spirit Models SGLS/SGLSHYB/SLS/SI/SGX/GE/S290/Explorer, PW00026A, Meanwell, Same as LGCC-29002226G) 3 Month Warranty

Power Supply, Main Board (Explorer\Compucon, BK014L7A, same as LGCC-24500022 ), New Style w/Housing

Power Unit, AC-ADP, DCP-A11, Power Switching Adapter

Pulley, 30 Teeth Gear for X-Rail, Explorer, Spirit GX (Smaller, ID=18mm, OD=22mm H=14.3mm)-DISCONTINUED

Pulley, 36 Teeth Gear for X-Rail, Explorer, Spirit GX (Larger, ID=22mm, OD=27mm H=14.3)

Pulley, X-axis (Right-Sprockets\Active), Mercury III, X252

Pulley, X-axis (Right-Sprockets\Active), Venus

For: Spirit Si, SGE

Pulley, X-axis Tension Idle Pulley Assy. For: Explorer\Spirit GX (Left Side)

Machine Model S400

GCC-290102022G

Pulley, X-Axis Tension Idle Pulley Assy. For: S400 (Left Side)

Pulley, X-axis Tension Idle Pulley Assy.
For: Venus-II\Mercury-III\X252\X380\MG380 (Left Side)

Pulley, Y-Axis idle Pulley Assembly (X380\X252)

Pulley, Y-Axis Idler Pulley Assembly for GCC Expert 24

Pulley, Y-Axis Pulley Assembly

Pulley, Z-axis Idle Pulley For: Mercury, X252, Spirit

Pulley, Z-axis Lead Screw Pulley For: Mercury, X252, Explorer (LH01312)

1704002 Purex , IFume 400I - Orange

Purex Commercial Grade Fume Extraction System for Hand or Machine Soldering
 

Purex , IFume 400I - PVC used  1704122

Second-hand 5000i Digital Fume Extractor (0LX5551D), 220v.

MPE-072095-2 Purex, FumeCube 120vac, Dual port with 2 Arms  For 2-Users (Before 072160-2)

 *Note: 230 VAC units take 4 to 6 weeks when are not in stock. Please request a quote and ask for delivery time.

Main Filter Type (SELECT): Std-HEPA/Chemical 110536 (or) Chemical 110537 (or) Cleanroom 110538

2 x 51mm x 2m Flexible Hose (Black)

4 x Connecting Cuffs (Black)

2 X Clamped Bracket

2 x 38mm Stainless Steel Flexible Arm & Valve

2 x 38mm Pen Nib Nozzle & 2 x Conical Cowl

HTS Code: 8421 39 8015

Previous # 072160-2 (Multi-Volt), New 2022 Part # 072095-2

Quatro AG111 -Carbon Filled Complete Replacement Module 14" GPC

Quatro AG128 (Type F128, Yellow, 5/Per Box)
Pre-Filter for Machine Model :CSA626L-S4S4-EA-8
Pack of 5 Yellow Bags per Box (CSA-626 I-Series)

HTS#: 8421.39.8015, Origin: CND

AG128 Spec.Download

Note: AG134 is a kit of 6 yellow bags (F128) per box, Special Order, Call us for Quote

Quatro AG128-25 (Type F128, Yellow, 25/Per Box)
Pre-Filter for Machine Model :CSA626L-S4S4-EA-8
Pack of 25 Yellow Bags per Box (CSA-626 I-Series)

HTS#: 8421.39.8015, Origin: CND

AG128 Spec.Download

Note: AG134 is a kit of 6 yellow bags (F128) per box, Special Order, Call us for Quote

Quatro AG168 -Blue/White Pre-Filter pad  (Pack of 12 Pre-filter Pad F166)

* Alternative QFAG169 Pack of 25

 AG168 Spec.Download 

Quatro AG169-Blue/White Pre-filter Pad (Pack of 25 Pre-filter F166)

* Alternative QFAG168 Pack of 12

• Bottom Side Discharge / brushless motor

• The CSA is the workhorse fume extractor of the laser industry; designed to operate in a heavy duty environment.  A large pre-filter bag that is easily accessed to change via a convenient side panel eliminates much of the debris that might otherwise clog the more expensive HEPA filters.  A huge chemical bed of 66Lb. (30kg) provides significant odor and VOC protection for much longer than the light duty units again providing a solution that can withstand a heavy workload.  Chemical compounds can be customized based on specific applications
• With large collection bag, HEPA Filter & Deepbed Odor filters
• LaserBlue Gel seal guarantees NO BYPASS
• Dual hi-speed turbine for high suction, pressure & airflow
• Whisper quiet operation is office friendly
• Universal design allows for 2.5", 3", 4" inlet along with discharge
• 120 volt, 4" inlet,
• F166 PAD, F071,F074,AG097 Filters
• variable speed control, (2)
• AB045-25 Brushless  motors,
• 8' of HD hose

• Bottom Grill Discharge 

• ​AB045-25 Brushless  motor

• The CSA is the workhorse fume extractor of the laser industry; designed to operate in a heavy duty environment.  A large pre-filter bag that is easily accessed to change via a convenient side panel eliminates much of the debris that might otherwise clog the more expensive HEPA filters.  A huge chemical bed of 66Lb. (30kg) provides significant odor and VOC protection for much longer than the light duty units again providing a solution that can withstand a heavy workload.  Chemical compounds can be customized based on specific applications
• With large collection bag, HEPA Filter & Deepbed Odor filters
• LaserBlue Gel seal guarantees NO BYPASS
• Dual hi-speed turbine for high suction, pressure & airflow
• Whisper quiet operation is office friendly
• Universal design allows for 2.5", 3", 4" inlet along with discharge
• 120 volt, 4" inlet,
• Filters: F166 PAD, F071,F074,AG097
• variable speed control, (2)
• 8' of HD hose

Quatro CSA626L-S4G-EA w/NA HD PowerCord + 8ft Hose
8Ft 4" HD Hose, (2) 4" Hose Clamps, E500 Power Cord
Specs: 120 volt, 4" Inlet, (2) F128, F073,F074,AG111, Variable Speed Control
HTS#: 8421.39.8015, Origin: CND

LPH426 LASER FUME EXTRACTION

• Large reinforced table top (28”x 26”). Custom sizes available.
• Telescopic legs for extra stability
• Front door filter access, No-Tools filter maintenance
• Designed for medium duty applications
• Multi-stage filtration system: pre-filter, HEPA and chemical filter
• LaserBlue gel seal guarantees ZERO FILTER BYPASS
• Dual high speed turbine for high suction, pressure and airflow
• Whisper quiet operation
• Digital control panel
• Also available: brushless units and custom filter configurations

• CFM:  280 (482m³ / hr)

• AMPS:  12.8   (120v.)  /  6.6  (240v.)

• High Speed Turbine

• FILTERS:  F166-125 , (AG168), (AG169), F069-071, F071, F074, AG09

Bottom side discharge 

• Our most popular unit for small to medium duty laser applications
• Designed to fit into an application where direct capture from the source is possible
• The SPH uses high power blower motors to pull the air through  3 stages of filtration consisting of a pre-filter for large particulate, a certified HEPA filter to capture 99.97% of all particulate greater than 0.3 micron and a chemical filter with up to 40 lbs. (18kg) of odour and VOC treatment
• LaserBlue Gel seal guarantees NO BYPASS
• This unit is available in brushed and brushless versions
• This unit has many options and can be customized for OEM applications
• We offer single or dual inlet lids with multiple diameter inlets as well as extended lids with either top or bottom intakes for customers using these units under tables. In total we have 18 different lids, ask us about your application!

• Filters:  F166 PAD, F071,F074,AG097

• 120 volt

• 4" INLET

• variable speed control,

• AR175 Brush motors

• 8" of HD hose

   

Bottom Side Discharge

• Our most popular unit for small to medium duty laser applications
• Designed to fit into an application where direct capture from the source is possible
• The SPH uses high power blower motors to pull the air through  3 stages of filtration consisting of a pre-filter for large particulate, a certified HEPA filter to capture 99.97% of all particulate greater than 0.3 micron and a chemical filter with up to 40 lbs. (18kg) of odour and VOC treatment
• LaserBlue Gel seal guarantees NO BYPASS
• This unit is available in brushed and brushless versions
• This unit has many options and can be customized for OEM applications

• 120 volt 

• 4" INLET

• bottom grill discharge

• F166 PAD, F071,F074,AG097, 

• variable speed control

• AB045-25 Brushless  motors

• 8' of HD hose

• We offer single or dual inlet lids with multiple diameter inlets as well as extended lids with either top or bottom intakes for customers using these units under tables. In total we have 18 different lids, ask us about your application!

Bottom Grill Discharge 

High pressure Brushless Motor

Twice as powerful as the SPH 400, this is our most powerful unit for medium to heavy duty laser applicationsSPH 800 series

• Designed to fit into an application where direct capture from the source is possible the SPH uses high power blower motors to pull the air through 3 stages of filtration consisting of a pre-filter for large particulate, a certified HEPA filter to capture 99.97% of all particulate greater than 0.3 micron and a chemical filter with up to 80 lbs. (36kg) of odour and VOC treatment
• LaserBlue Gel seal guarantees NO BYPASS
• This unit is available in brushed and brushless versions with up to 560cfm.
• This unit has many options and can be customized for OEM applications
  Compact installation requiring no bulky and expensive ductwork
• Filters easily accessed and changed in less then 1 minute ( no tools required )
• Powder coated durable welded cabinet
• Recirculating purified air reduces heating and air conditioning cost

• Filters: (2) F166 PAD, (2) F071, (2) F074, (2) AG097

• 230 volt, 2 x  4" inlets

• bottom grill discharge 

•  variable speed control

• AB045-25 Hi Airflow Brushless

•  8' of HD hose

Bottom Side Discharge 

Brush Motor

SPH 800 

• Twice as powerful as the SPH 400, this is our most powerful unit for medium to heavy duty laser applications
• Designed to fit into an application where direct capture from the source is possible the SPH uses high power blower motors to pull the air through 3 stages of filtration consisting of a pre-filter for large particulate, a certified HEPA filter to capture 99.97% of all particulate greater than 0.3 micron and a chemical filter with up to 80 lbs. (36kg) of odour and VOC treatment
• LaserBlue Gel seal guarantees NO BYPASS
• This unit is available in brushed and brushless versions with up to 560cfm.
• This unit has many options and can be customized for OEM applications
  Compact installation requiring no bulky and expensive ductwork
• Filters easily accessed and changed in less then 1 minute ( no tools required )
• Powder coated durable welded cabinet
• Recirculating purified air reduces heating and air conditioning cost

• Filters:  (2) F166 PAD, (2) F071, (2) F074, (2) AG097

• 230 volt, 2 x  4" inlets

• bottom grill discharge 

•  variable speed contro

•  (3) AR176 Brush motors

•  8' of HD hose

SPH400, Series, Medium-Heavy Duty Filtration System
Specs: 120 volt, 4" Inlet, Bottom Grill Discharge  F166 PAD, F071,F074,AG097, Variable Speed Control, (2) AR175 Brush Motors, 8' of HD Hose
HTS#: 8421.39.8015, Origin: CND

Bottom grill discharge 

• Our most popular unit for small to medium duty laser applications
• Designed to fit into an application where direct capture from the source is possible
• The SPH uses high power blower motors to pull the air through  3 stages of filtration consisting of a pre-filter for large particulate, a certified HEPA filter to capture 99.97% of all particulate greater than 0.3 micron and a chemical filter with up to 40 lbs. (18kg) of odour and VOC treatment
• LaserBlue Gel seal guarantees NO BYPASS
• This unit is available in brushed and brushless versions
• This unit has many options and can be customized for OEM applications
• We offer single or dual inlet lids with multiple diameter inlets as well as extended lids with either top or bottom intakes for customers using these units under tables. In total we have 18 different lids, ask us about your application!

• Filters:  F166 PAD, F071,F074,AG097

• 120 volt

• 4" INLET

• variable speed control,

• AR175 Brush motors

• 8" of HD hose

   

Bottom Grill Discharge

• Our most popular unit for small to medium duty laser applications
• Designed to fit into an application where direct capture from the source is possible
• The SPH uses high power blower motors to pull the air through  3 stages of filtration consisting of a pre-filter for large particulate, a certified HEPA filter to capture 99.97% of all particulate greater than 0.3 micron and a chemical filter with up to 40 lbs. (18kg) of odour and VOC treatment
• LaserBlue Gel seal guarantees NO BYPASS
• This unit is available in brushed and brushless versions
• This unit has many options and can be customized for OEM applications

• 120 volt 

• 4" INLET

• bottom grill discharge

• F166 PAD, F071,F074,AG097, 

• variable speed control

• AB045-25 Brushless  motors

• 8' of HD hose

• We offer single or dual inlet lids with multiple diameter inlets as well as extended lids with either top or bottom intakes for customers using these units under tables. In total we have 18 different lids, ask us about your application!

Quatro SPH82B5i-T44G-EA c/w HD NA 230V Twist Lock Power Cord
Medium-Heavy Duty Filtration System
Specs: 230 volt, (2) F166-125, (2) F071 + (2) 2" Filter Support, (2) F074, (2) AG097 "Brushless" Motors, E519 Power Cord, 1 Port Capped, 16Ft 4" HD Hose + 4 Hose Clamps
HTS#: 8421.39.8015, Origin: CND

Bottom Side Discharge 

High pressure Brushless Motor

Twice as powerful as the SPH 400, this is our most powerful unit for medium to heavy duty laser applicationsSPH 800 series

• Designed to fit into an application where direct capture from the source is possible the SPH uses high power blower motors to pull the air through 3 stages of filtration consisting of a pre-filter for large particulate, a certified HEPA filter to capture 99.97% of all particulate greater than 0.3 micron and a chemical filter with up to 80 lbs. (36kg) of odour and VOC treatment
• LaserBlue Gel seal guarantees NO BYPASS
• This unit is available in brushed and brushless versions with up to 560cfm.
• This unit has many options and can be customized for OEM applications
  Compact installation requiring no bulky and expensive ductwork
• Filters easily accessed and changed in less then 1 minute ( no tools required )
• Powder coated durable welded cabinet
• Recirculating purified air reduces heating and air conditioning cost

• Filters: (2) F166 PAD, (2) F071, (2) F074, (2) AG097

• 230 volt, 2 x  4" inlets

• bottom grill discharge 

•  variable speed control

• AB045-25 Hi Airflow Brushless

•  8' of HD hose

SPHm1163B Mini Deluxe.  Multi-Purpose Dust Collector 

• Capture fumes and particulate debris at source
• Multiple filter arrangement allows for disposable bag, HEPA cartridge and gas phase filter
• Quiet (52 dBA) with built in whisper quiet features
• Portable design can be installed anywhere
• Specialty chemical filters can be incorporated to deal with toxic and/or nuisance odors, contact us for custom applications
• Automated controls available
• AMP:  7 (120V.)  3 (240v.)
• CFM 141 m³ / min
• FILTERS :  AG162, AG140, F180