Vinyl Cutters

Carriage Assembly without PCB for GCC Expert 24

Carriage Assembly without PCB(EX-24 LX) for GCC Expert 24

For GCC Laser Models Mercury I, II, III (5206e / 5272 v1, v2 MB)  (Before 29001191G)

* Includes Top DU Rollers and Bottom Wheels
** DOES NOT include optics

For: GCC Models Spirit SLS\S290LS (Before Serial #: I50790)

For Models Spirit Si & SGE Before Serial #: I50790

For Models Spirit Si & SGE After Serial #: I50790

Carriage, Lens Carriage Assembly w/o Lens and Mirror (Before SN: I50790), Spirit GX

CerMark LMC6044P
Premium Black, 1000grams
Use: Marking Material for Glass and Ceramics

NOTE: By the conclusion of 2024, the LMC-6044P Paste will be substituted with the ULTRA Paste. The ULTRA Paste is specifically designed for marking on ceramic substrates and has been utilized for laser marking ceramics for the past three years with excellent results.

Recommended substrates:

LMC6044P material can mark a range of glass and ceramic substrates. It has previously been used to mark many different types of glass in industrial applications such as vehicle windshields, laboratory instruments, plate glass, and glass ampoules. It can also be used for decorative work on bottles, wine glasses and awards. Additionally, it has found uses on ceramic products such as porcelain sanitary ware, electronic substrates, and for decorating wall and floor tiles.

LMC6044P is recommended for creating black marks on glass and ceramic substrates. It makes darker black marks on these substrates than the older LMC12. LMC6044P dries quickly as a dark grey powder-like coat and is easy to wash after marking. The coat can be smudged or wiped off prior to laser marking, however, so LMC6044P should be marked shortly after application.

SDS CerMark LMC6044P

 LMC6044P coverage

Premium Black, 250grams
Use: Marking Material for Glass and Ceramics

NOTE: By the conclusion of 2024, the LMC-6044P Paste will be substituted with the ULTRA Paste. The ULTRA Paste is specifically designed for marking on ceramic substrates and has been utilized for laser marking ceramics for the past three years with excellent results.

LMC6044P is recommended for creating black marks on glass and ceramic substrates. It makes darker black marks on these substrates than the older LMC12. LMC6044P dries quickly as a dark grey powder-like coat and is easy to wash after marking. The coat can be smudged or wiped off prior to laser marking, however, so LMC6044P should be marked shortly after application. 

SDS CerMark LMC6044P

Weight: 1000grams
Use: Stainless Steel, Aluminum, Brass & Other Hard Metals
HTS Code: 320710000000

LMM14 is one of TherMark’s two general-purpose laser marking inks and is recommended for creating a black mark on most metals. The combination of its flexible process window and wide range of applicable substrates makes LMM14 an extremely easy product to use. In general, if you are looking for one laser marking product to keep on your shelf, we recommend LMM14.

LMM14 dries quickly as a light-gray powder coat and is extremely easy to wash after laser marking. This coat should not be extensively handled prior to laser marking, however, so LMM14 should be marked shortly after application.

 SDS For Cermark LMM14 Paste

 LMM14  coverage

Weight: 250grams-.55Lbs
Use: Stainless Steel, Aluminum, Brass & Other Hard Metals, ~5000SQ" Coverage
HTS Code: 320710000000

 SDS For Cermark LMM14 Paste

 LMM14  coverage

Cermark LMM14, Thermark Black 50grams-1.75oz
Use: Stainless Steel, Aluminum, Brass & Other Hard Metals, ~800SQ" Coverage

 SDS For Cermark LMM14 Paste

 LMM14  coverage

Cermark LMM14, Thermark Black 500 Grams-1.1lbs

 SDS for Cermark LMM14

 LMM14  coverage

Weight: 100gram
Use: Stainless Steel  & Pewter

LMM6000, a CerMark™ product, is one of TherMark’s two general purpose laser marking inks and is recommended for creating black marks on a variety of metals. It has been specially designed to dry in a hard coat which can be handled prior to laser marking without rubbing off. This allows parts coated with the product to be stored, moved or stacked prior to laser marking.

SDS For Cermark LMM6000

 LMM 6000  coverage

LMM6000- 1000grams is on backorder until Nov. 18th 2022

Weight: 1000grams
Use: Stainless Steel  & Pewter

LMM6000, a CerMark™ product, is one of TherMark’s two general-purpose laser marking inks and is recommended for creating black marks on a variety of metals. LMM6000 has been specially designed to dry in a hard coat which can be handled prior to laser marking without rubbing off. This allows parts coated with LMM6000 to be stored, moved, or stacked prior to laser marking. 

SDS For Cermark LMM6000

 LMM-6000 coverage

Weight: 250grams
Use: Stainless Steel  & Pewter

LMM6000, a CerMark™ product, is one of TherMark’s two general-purpose laser marking inks and is recommended for creating black marks on a variety of metals. It has been specially designed to dry in a hard coat which can be handled prior to laser marking without rubbing off. This allows parts coated with the product to be stored, moved or stacked prior to laser marking.

SDS For Cermark LMM6000

SDS (Spanish Doc). For Cermark LMM6000  

 LMM-6000 coverage

Weight: 50gram
Use: Stainless Steel  & Pewter

LMM6000, a CerMark™ product, is one of TherMark’s two general purpose laser marking inks and is recommended for creating black marks on a variety of metals. It has been specially designed to dry in a hard coat which can be handled prior to laser marking without rubbing off. This allows parts coated with the product to be stored, moved or stacked prior to laser marking.

SDS For Cermark LMM6000

 LMM-6000 coverage

Weight: 50gr.
Use: Stainless Steel  & Pewter
HTS Code: 3207.10.0000

Is a specifically formulated water-based product designed to perform the same as the LMM-6000, The LMM-6060 is an all-in-one metal marking product.  The LMM-6060 will not work on metals with a lacquered coating. The LMM-6060 has improved adhesion for difficult to stick to surfaces such as high polished aluminum or stainless and chrome.  Dries to a tough film that can be handled. Coated parts can be stacked. Recommend starting point for settings
CO2: 90-100% Power (35 Watt Laser), 15-30% speed, 500 DPI / 500 PPI.  Fiber: 10-25 Watts, 10-20 Inches/Sec Speed.

Tape Notes: Black Marking, for Metal, 2"x 6"  Sheet  2.0 oz
Export Notes: HTS#: 3824.99.9297

LMM6018 instructions Download

Cermark Tape SDS Document

Tape Notes: Black Marking, for Metal, 3"x 6"  Sheet  2.0 oz
Export Notes: HTS#: 3824.99.9297

LMM6018 instructions Download

Cermark Tape SDS Document

Tape Notes: Black Marking, for Metal, 2"x50 ft Roll  10 oz
Export Notes: HTS#: 3824.99.9297

LMM6018 instructions Download

Cermark Tape SDS Document

Tape Notes: Black Marking, for Metal, 1"x50 ft Roll  6 oz
Export Notes: HTS#: 3824.99.9297

Spray 12 Oz.
Use: Metals, Ceramics, Glass and More
HTS Code: 320710000000

CerMark Ultra will mark at up to 80% faster speed compared to LMM 6000 on stainless steel.  The coating will also make marks on all metal types as well as glass, ceramic, stone, slate, brick and other hard surface items.

For use directly on a bare materials surface.  May not work correctly on painted or coated surfaces. Not intended for use on plastics or wood.

SHIP NOTE: This product SHIPS UPS\FEDEX GROUND ONLY to the 48 contiguous states. Products shipped via air to Hawaii or international destinations will be subject to additional hazardous materials charges. This is due to regulations on shipping pressurized cans on aircraft.Shelf Life And storage Information Production Date: Click On Image

 New Ultra coverage

Weight: 1000-Grams
Use: Metals, Ceramics, Glass and More
HTS Code: 320710000000

CerMark Ultra will mark at up to 80% faster speed compared to LMM 6000 on stainless steel.  The coating will also make marks on all metal types as well as glass, ceramic, stone, slate, brick and other hard surface items.

For use directly on a bare material's surface.  May not work correctly on painted or coated surfaces. Not intended for use on plastics or wood.

  
Data Sheet

 New Ultra coverage

Cermark Ultra Black
Weight:  250-Grams
Use: Metals, Ceramics, Glass and More
HTS Code: 320710000000

CerMark Ultra will mark at up to 80% faster speed compared to LMM 6000 on stainless steel.  The coating will also make marks on all metal types as well as glass, ceramic, stone, slate, brick and other hard surface items.

For use directly on a bare material's surface.  May not work correctly on painted or coated surfaces. Not intended for use on plastics or wood.

  
Data Sheet

 New Ultra coverage

Cermark Ultra Black 500-Grams

CerMark LMM6000, Black Use: Stainless Steel  & Pewter, 500gram.

CerMark Ultra will mark at up to 80% faster speed compared to LMM 6000 on stainless steel.  The coating will also make marks on all metal types as well as glass, ceramic, stone, slate, brick, and other hard surface items.

For use directly on a bare material's surface.  May not work correctly on painted or coated surfaces. Not intended for use on plastics or wood.

  
Data Sheet

 New Ultra coverage

Weight: 50-Grams
Use: Metals, Ceramics, Glass and More
HTS Code: 320710000000

CerMark Ultra will mark at up to 80% faster speed compared to LMM 6000 on stainless steel.  The coating will also make marks on all metal types as well as glass, ceramic, stone, slate, brick and other hard surface items.

For use directly on a bare materials surface.  May not work correctly on painted or coated surfaces. Not intended for use on plastics or wood.

   Data Sheet

 New Ultra coverage

Kit Notes: Clean Air Feed Cowl 1500i/2000i
Machine Model: For 1500i/2000i
Export Notes: HTS Code #: 8421392090, Made in the UK-England

Collet, 1/4"(6.35mm) for: Roland DGA EGX350/EGX400/EGX600, MDX-40, SRM-10, JXW-10
This 6.35mm Collet (Product #ZC-23-635) is for use with bottom loading end mills. It is compatible with the following Roland DGA devices: JWX-10, EGX-300/400/600, MDX-40, and SRM-10.

Collet, 1/8", ZC-23-3 Solid Split Bottom Load Collet 3mm (.125") For: DE-3, EGX300/EGX350/EGX400/EGX600

This 3mm Collet (Product #ZC-23-3) is for use with bottom loading end mills. It is compatible with the following Roland devices: JWX-10, EGX-300/400/600, MDX-40, and SRM-10.

Collet, Split, Top Load Collet 3.175mm PNC2300A (1,8") For: EGX300/ EGX350/EGX360

This 3.175mm Collet (Product #ZC-23-3175) is for use with bottom loading end mills. It is compatible with the following Roland devices: JWX-10, EGX-300/400/600, MDX-40, and SRM-10.

Collet, 11/64", Solid Bottom Load Collet 4.36 MM (.171") 

For: DE3/EGX350/EGX400/EGX600, Half Round Cutters

This Collet Holder (Product #1000003391, alternative to discontinued # 21655242) is used with standard cutting tools in the EGX-350. It should not be used with pass-through collets. This holder prevents the cutting tool from dropping through the spindle and damaging the engraving material.

Collet, 11/64", ZC-E436 Solid Bottom Load Collet (.171") For EGX300\EGX350\PNC-2300A\EGX400\600, Burnishing - Diamond Guide

This Bottom Loading Burnished Guide (Product #ZC-E436) is intended for use with the Roland EGX-Series engravers. The guide is designed for diamond drag applications and must be used with diamond engraving burnishing tools.

Collet, 6mm for EGX-300/EGX350/EGX400/EGX600600, JWX-10, MDX-40

This 6mm Collet (Product #ZC-23-6) is for use with bottom loading end mills. It is compatible with the following Roland devices: JWX-10, EGX-300/400/600, MDX-40, and SRM-10.

Compressor for Air Assist-High Volume, 110Vac,3.18 CFM

A specially designed Air Compressor for laser engravers, by using an oil-less diaphragm, you help eliminate the harmful and damaging side effects of moisture on the laser optics. Also, provides the optimal air pressure your laser needs to blow away vaporized particles and helps prevents overheating. A must to keep lenses and mirrors clean to promote longer laser life. Recommended for production enviroments where laser will be operating eight (8) hours or more.

SPECS:
Voltage:100~115vac
Power Consumption:270Watt
Hz:50/60
Air capacity:86~95 L/min
Outlet pressure is 7~10 kg/cm2 (100~142psi)

Compressor for Air Assist-High Volume, 220Vac,3.18 CFM

A specially designed Air Compressor for laser engravers, by using an oil-less diaphragm, you help eliminate the harmful and damaging side effects of moisture on the laser optics. Also, provides the optimal air pressure your laser needs to blow away vaporized particles and helps prevents overheating. A must to keep lenses and mirrors clean to promote longer laser life. Recommended for production enviroments where laser will be operating eight (8) hours or more.

SPECS:
Voltage: 220vac
Power Consumption: 270 watts
Hz:50/60
Air capacity:86~95 L/min
Outlet pressure is 7~10 kg/cm2 (100~142psi)

Compressor for Air Assist, 115Vac-Low Volume, 58PSI

Low volume Air Compressor for laser engravers; help eliminate the harmful and damaging side effects of moisture on the laser optics. Also, provides the optimal air pressure your laser needs to blow away vaporized particles and helps prevents overheating. A must to keep lenses and mirrors clean to promote longer laser life. Recommended for LOW production enviroments where laser will be operating less than four (4) hours.

Compressor for Air Assist-Medium Volume Laser Engraving Applications, 115Vac, 1/6HP Oil Free Twin Cylinder, Max. 80PSI (Working Pressure: 0-60PSI, Flow: 1.14CFM)
One (1) Year Manufacturer's Warranty if purchased.

Speed Control, Purex Upgrade Pack-1
Export Notes: HTS Code: 8544.42.9090, Made in the UK-England
 

Kit Notes: 125mm - 80mm x 3.0m Connection kit

Machine Models: 400i/ 400i Dye Sub/ I Fume Orange,Violet,Green and Red 

Export Notes: HTS Code #: 8421392090, Made in the UK-England

• Diameter of customer's port = 125mm

• Length of hose = 3.0m

• Purex machine inlet diameter = 80mm

Kit Notes: 75mm - 75mm x 1.5m Connection , Fume Buster

Export Notes: HTS Code #: 8421392090, Made in the UK-England

Notes: 100mm - 150mm, Hose Kit for 3 outlet laser

Export Notes: HTS Code: 8421392090, Made in the UK-England

Switch, Remote ON\OFF For Purex Units, Foot Switch, 5M Cable

Machine Model:  Alpha / FumeCube
Export Notes: HTS Code: 8544.42.9090, Made in the UK-England
105114 Remote -Systems: Digital

*Interfacing Cables Brochure *