Vinyl Cutters

Machine Model: GCC Jaguar Series (Jaguar II, III,IV,V)

GCC 29002348G Roller, Pinch Roller Assembly, All Jaguar series/Ultra

29001437G  Roller,Pinch Roller Assembly, Lynx/Bobcat/Expert Pro/Puma II/Puma III/Puma IV

29006194G Roller, Pinch Roller Assembly, RX &RXII

For:  GCC Vinyl Cutter AR-24

Roller, Pinch Roller, Sable/Bengal/Expert/Expert LX

GCC 290067750G PPF Pinch Roller Assembly, All Jaguar

Roller, Small Black Roller, Pack of 2 Set (Mercury/Venus/X252,X380, J/L & Vision LaserPro, BK01321) Bottom X-axis or Side Y-Axis

For: C180-II\Spirit Models, Pack of 2 (X-axis Bottom, BK01836A)

Roller, Small-Black for X500-II, III

Rollers, CAM Roller Puma, Lynx (PL02021A)

Rotary Attachment for GCC LaserPro Spirit GLS\GLS-HYB\X380R\MG380X

WORKPIECE LIMITATIONS:

Max. Length: 650mm(25.59inches)
Max. Loading Weight: 7 kg (15 lbs.) 
Min. Diameter: 90 mm (3.54 inches)
Max. Diameter 180 mm (7.09 inches)
Max. Loading 4Kg

Screw, for DU Roller Assembly, X-Axis (Gaia, X500-I)

Screw, For Retainer, X-axis Belt Retainer Screw to Rail, 90° dish flat head machine screw M3*8L

* Image shows Retainer and two (2) screws that are needed. This is part is ONLY for screws and sold individual.

Screw, Honeycomb Table Bolts for: Explorer/Mercury/C-180/Spirits 

LGCC-22800914G – Screw, Mirror screw with O-Ring (24700044G)

Screw, Roller Bearing, X-axis (Mercury, X252, X380)

Screw, Rotary Attachment Base Plate Set Screw (M6*16, each)

Screw, Seat-Auto Focus Screws (Qty 2, M2*3L)

Screw, Stopper, Adjust Nose EGX-350, DE3, See RR1000003307.SUB

Adjust Nose Stopper (Product #1000003307) is intended for use with the EGX-350. The stopper tightens and keeps the micro-dial calibrated.

Screw, Thumb Plastic Screw for Carriage\Lens Assy (Cover, Optics)

RR31049175AS Screw, wire pin locking screw (M4*20 NI) EGX350

Roland Notes: This machine has been discontinued

Screw, Z Axis Table LeadScrews, Each (Spirit GX/Mercury/X252/X380)

Stopper, Adjust Nose EGX-350, DE3
Substitude Allen Screw, M3-.5-8

Original part RR1000003307 Discontinued as of 09/2022

Sensor, AAS II Sensor Assembly w/Bracket for Puma III

Sensor, PCB Board, X-axis Motor,  For Spirit GE/Spirit Si before K50319, Spirit LS BEFORE K50114 (MCB-5206 Parallel, Braided AF Cable, PCB-Marking 23800142G)
* Note: MCB-5206 will have a Parallel Connection Input

Sensor, PCB Board, X-axis Motor, For X252/X380/X500/Venus II-Mercury II, Mercury III (4-Amp, MCB-5206, Replaces 290065220G, 238003430G, 23800225G), Braided Cable, with AAS I/O

* See image of 5206 Main Board with USB & Parallel Port

Sensor, PCB Board, X-axis Motor, (4-Amp, MCB-5206), For Braided Cable, with AAS I/O Re. 2 Kit Assembly (X252/X380/Mercury I,  II & III)

Includes AF Cable (20900628) & AF PCB (29000305G)

Sensor, PCB Board, X-axis Motor, For C180-I (4-Amp, MCB-5206, Replaces 29004513G & 23800235G)

Sensor, PCB Board, X-axis Motor, For C180-II (4-Amp, MCB-5206E, Replaces 290077850G & 238003710G)

Sensor, PCB Board, X-axis Motor, For Explorer, Braided Cable,  Rev. 2

Sensor, PCB Board, X-axis Motor, For Mercury-III\X252\X380\X500-III (5-Amp, New MCB-5272 Red, Replaces 290090960G), Flat Ribbon Cable
* Note: MCB-5272 will have a USB & Ethernet Connection Input (See attached image with Red Main Board)

Sensor, PCB Board, X-axis Motor, For Spirit Si\SGE\LS\GLS (4-Amp, MCB-5206, Replaces 29005107G & 29002511G, 23800226G Rev. 2-2017), Flat Ribbon Cable, AAS I
* Note: MCB-5206 will have a Parallel Connection Input

29004086G  Sensor, PCB Board, X-axis Motor, For: Gaia\X500          

Sensor, PCB, Rotary Attachment Sensor PCB

For GCC LaserPro X-Series Models X380, X252, MG-X380HYB

For GCC LaserPro X500 Series

Shear, 12" Modular- Combo (Plastics & Metals)

* Select between Metric or Imperial Guide Rullers

GCC 24100253G Shift-Lever Cam (Black) , Jaguar 

Side Support Left(Black) for GCC Expert 24

Side Support Right(Black) for GCC Expert 24

Slide Bracket for simple stand (CS only) Expert 24

GCC LaserPro Unveils SmartEYES™ CCD for S400

As one of the leading manufacturers of equipment for the visual communication industry, GCC is thrilled to launch GCC SmartEYES CCD for S400 laser engraving machine.

Spark Notes: 100mm In-Line Compact
Machine Model: Analog Series

Export Notes:  HTS Code #:  8421.39.8015, Made in the UK-England
Freight Class: 125, NMFC# 069100-03

Serie of baffles in the box… Air slows down inside the box as the cross-sectional duct area is increased to allow for larger particulate in the air stream to drop out. Air in the duct also turns through the baffles several times, this allows the largest particulate (those capable of carrying thermal energy) to transfer their energy to the cooler baffles and turn off

Spark Notes: In-Line Cabinet
Machine Model: For Digital Series (200i, 300i, 400i, 400i-PVC, 800i)
Export Notes:  HTS Code #:  8421.39.8015, Made in the UK-England
Freight Class: 125, NMFC# 069100-03