CERMARK® ULTRA LASER MARKING

DM5975-DuraBlack, Matte Black .020"- 12"x20"  With Adh. 
* Call us about GOV-GSA Discount if you are a military or Government agency
With DuraBlack™ Marking on Laser Markable Aluminum is possible without a protective topcoat. DuraBlack™ is the long-term solution to protecting your government or business assets for the entire life cycle of your equipment even in harsh operating environments.

• Matte Black
• With Performance Adhesive backing
• .020 Inch Thick
• 12 x 20 Inch Sheets
• 5 Sheets Per Box

OUTDOOR DURABLE CO2 LASER MARKABLE ALUMINUM.

DuraBlack is CO2 laser markable aluminum for durable, on-demand marking for harsh operating environments. In side-by-side tests, DuraBlack outperforms black anodized aluminum and laser markable acrylic tape in select applications. DuraBlack is resistant to sunlight (UV-radiation), abrasion, high-temperatures, salt-spray and chemical exposure. Because of its ability to perform across a range of challenging environments, DuraBlack meets several government, industrial and military specifications including MIL-STD 130N, A-A-50271 (≈MIL-P-514D) and MIL-STD-15024F, Type L.

Composed of a multi-level coating on anodized aluminum, DuraBlack can be attached to either curved or flat surfaces with adhesive, rivets or screws. It is imaged with any CO₂ marking laser to produce a durable, high-resolution barcode or human-readable image.

DM05976-DuraBlack, Matte Black .020"- 20"x24" No Adh.

DM05977-DuraBlack, Matte Black .020"- 20"x24" With Adh.

Premium Black, 250grams
Use: Marking Material for Glass and Ceramics

NOTE: By the conclusion of 2024, the LMC-6044P Paste will be substituted with the ULTRA Paste. The ULTRA Paste is specifically designed for marking on ceramic substrates and has been utilized for laser marking ceramics for the past three years with excellent results.

LMC6044P is recommended for creating black marks on glass and ceramic substrates. It makes darker black marks on these substrates than the older LMC12. LMC6044P dries quickly as a dark grey powder-like coat and is easy to wash after marking. The coat can be smudged or wiped off prior to laser marking, however, so LMC6044P should be marked shortly after application. 

SDS CerMark LMC6044P

CerMark LMC6044P
Premium Black, 1000grams
Use: Marking Material for Glass and Ceramics

NOTE: By the conclusion of 2024, the LMC-6044P Paste will be substituted with the ULTRA Paste. The ULTRA Paste is specifically designed for marking on ceramic substrates and has been utilized for laser marking ceramics for the past three years with excellent results.

Recommended substrates:

LMC6044P material can mark a range of glass and ceramic substrates. It has previously been used to mark many different types of glass in industrial applications such as vehicle windshields, laboratory instruments, plate glass, and glass ampoules. It can also be used for decorative work on bottles, wine glasses and awards. Additionally, it has found uses on ceramic products such as porcelain sanitary ware, electronic substrates, and for decorating wall and floor tiles.

LMC6044P is recommended for creating black marks on glass and ceramic substrates. It makes darker black marks on these substrates than the older LMC12. LMC6044P dries quickly as a dark grey powder-like coat and is easy to wash after marking. The coat can be smudged or wiped off prior to laser marking, however, so LMC6044P should be marked shortly after application.

SDS CerMark LMC6044P

 LMC6044P coverage

60-Min. 1-On-1 Diagnostic Troubleshooting Phone Call (Hardware\Electronics\Laser Tube Issues)

(After your purchase, a Jorlink representative will be in touch to arrange the meeting time and to provide you with a meeting link. Please be sure to select a preferred timeframe)

Disclaimer: (a) We will do our best to troubleshoot and evaluate the problem and attempt to reach a solution. This will require clients to adjust and repairs on their own with our remote assistance and instructions. Parts may need to be purchased with a no-returns policy unless you have an active membership in our yearly 365-Support program.

(b) A per event/case call will be limited to fifty minutes (60 min Max); if the problem has not been resolved within this time, we will provide other suggestions for on-site service or additional paid services.

(c) We recommend having a person on-site with experience in the Electro-Mechanical field assist as there is electrical testing with a digital voltage meter that may be required.  CAUTION MUST be taken when around electricity or working to measure laser tube power, use protective eyewear or any other safeguards.

(e) REPAIRS ARE NOT GUARANTEED, please discuss with your Sales Rep. on upgrades and credits for our services with any trade-in equipment.

Compressor for Air Assist-Medium Volume Laser Engraving Applications, 115Vac, 1/6HP Oil Free Twin Cylinder, Max. 80PSI (Working Pressure: 0-60PSI, Flow: 1.14CFM)
One (1) Year Manufacturer's Warranty if purchased.