Fluids

Cable, Laser Tube Power Cable Glass Tube  209021580G

GCC-209027610G Cable, Laser Tube Signal Cable, 80GT, 1730mm to MCB

Cable, LED Lamp Cable to DC12V – 160cm (0116-257-164) For: Spirit GE,GX, GLS

Cable, MCB to Laser Board on GAIA I/II Laser (RCA to RCA)

Power Cable ONLY for MPX95 AC Adaptor, Power Unit (#4)

* Note: Also good for Roland-FP-740 Cable-AC- 2P 100V 2.5M Tw-23495118 FP-740 Cable-AC, 2P 100V 2.5M Tw – 23495118 Cable-AC, 2P 100V 2.5M Tw is suitable for Roland FP-740 printers. This is the original Roland part (number 23495118). Roland-FP-740 Cable-AC- 2P 100V 2.5M Tw-23495118 is compatible for the following models: Roland CJ-540 | SJ-745ex | SP-300 | SP-300v | FJ-540 | FP-740 | SC-540 | SC-545ex | SJ-540 | SJ-640 | SJ-645ex | SJ-740

Cable, Quatro AE427
Universal Remote Cable

*Pin- Out Diagram download*

Cable, Rotary Connection Cable from Machine to Attachment PCB (155cm for Rotary Assy 29001051G and 290072190G)

Cable, USB Cable, Communication, Machine Frame Port, B type Cable MOLEX 5Pin 2.54mm, 40cm (Mercury II & III/C180 with 5206E and 5272 earlier V1 MB)

Cable, USB Cable, Communication, Machine Frame Port, B type Cable MOLEX 5Pin 2.54mm, 40+cm (X380-MG380, \MCB 5206E & early 5272V1)

Cable, USB to Serial Communication (Roland ME-US3, EGX400\EGX600, EGX30) with Online Setup & Installation

* Driver Download & Installation Required by Online Appt.

Cable, X-Motor Flat Ribbon, 12 Pin, 70.8"L-180mm (X500-II)

Cable, Fan PCB DC output to 12V PCB cable 1700mm (0116-9091-173-1) Spirit GX

SignLab CutPro Software

The ultimate vinyl cutting design and production sign software. SignLab CutPro is feature-rich in text composition, design, layout and production tools for the signmaker looking to create vinyl cut signage. Choose from hundreds of cutter drivers to install the one that you require and instantly have a complete vinyl cutting design and production workstation.

Compatible Machines 

Try our Subsciption based product at:
SignLab Print & Cut Monthly Subscription Version 
Download Trial Verion Here

SignLab Print & Cut Software

SignLab Print and Cut is the professional signmakers choice for everyday design and production of digitally printed, vinyl cut, print/cut signs, and graphics. It is used by thousands of Signmakers worldwide as the design and production hub of their business. While it enables today’s signmaker to design and produce every job in a single software package its true strength is in the integration of many other widely used design applications such as Corel, Illustrator and PhotoShop. SignLab Print and Cut is anchored by Visual Production Manager a simultaneous, multiple job queue that supports most printers, cutters and hybrid print/cut devices. Manufacturers supported include, Roland, Mutoh, Mimaki, Summa, Gerber, Graphtec, Epson, Hewlett Packard, Canon and many others. 

Compatible Machines 

Try our Subsciption based product at:
SignLab Print & Cut Subscription 

SignLab Print & Cut Software (2+ Lic.)

SignLab Print and Cut is the professional signmakers choice for everyday design and production of digitally printed, vinyl cut, print/cut signs and graphics. It is used by thousands of Signmakers worldwide as the design and production hub of their business. While it enables today’s signmaker to design and produce every job in a single software package its true strength is in the integration of many other widely used design applications such as Corel, Illustrator and PhotoShop. SignLab Print and Cut is anchored by Visual Production Manager a simultaneous, multiple job queue that supports most printers, cutters and hybrid print/cut devices. Manufacturers supported include, Roland, Mutoh, Mimaki, Summa, Gerber, Graphtec, Epson, Hewlett Packard, Canon and many others. 

Compatible Machines 

SignLab For VersaWorks™ Software

A specially configured version of SignLab that sends designs directly to your VersaWorks™ queues and your Roland™ printer. Print quickly and easily to either queue “A” or “B” directly from SignLab. Includes the VersaWorks™ color palette for easy color matchingSignLab for Versa Works with the VersaWorks™ swatch. Also includes all the great bitmap and vector design tools you need, complete professional text composition tools and most importantly, all the sign-specific layout and production tools you need to create signs and wide format graphics. No need to switch back and forth between different bitmap and vector design applications, do it all right from SignLab for VersaWorks™

Compatible Machines 

SignLab DesignPro

A complete stand-alone, signmaking-specific design station. Great for existing SignLab users if you want to add a design-only workstation to your shop or for signmakers currently using other software that may not be sign-specific.SignLab DesignPro. All of the bitmap/vector tools you need to create high-value,quality signage. Bring files from DesignPro into full-fledged SignLab packages that output to vinyl cutters or digital printers. Signmakers who don’t use SignLab but may be using RIP-only software to send jobs to their digital printers or print/cut devices, are able to leverage the design power within this package by simply exporting the completed file directly to their software RIP and then print or printing and cutting the file. SignLab DesignPro is loaded with all the text composition, design and layout tools you need in a single easy-to-use package.

Compatible Machines 

SignLab for Mimaki™

Enhance the utility of your Mimaki™ printer. SignLab for Mimaki™ sends jobs directly to your Rasterlink™ RIP software with an easy File>Print workflow. Reduce design and production time with tools specific to wide-format, digitally printed signage. Eliminate your dependence on multiple desktop design software packages and use a single signmaking-specific application to get all of your work done.

Compatible Machines 

SignLab VinylPro

An all-inclusive vinyl cut signage design and production software product but also supports the design of full color graphics that may be sourced out for wide format digitally printed signs. All the great tools included within SignLab Vinyl plus a complete feature set of advanced, yet easy to use color design tools required for large format printing or print and cut signs and graphics.

Compatible Machines 

SignLab VinylPro

An all-inclusive vinyl cut signage design and production software product but also supports the design of full color graphics that may be sourced out for wide format digitally printed signs. All the great tools included within SignLab Vinyl plus a complete feature set of advanced, yet easy to use color design tools required for large format printing or print and cut signs and graphics.

CADlink, Video Tutorial for SignLab (CD, 3 Vol.)

Carbon Media Refill for Quatro, QFAG097, Filter- Carbon Filled Complete Replacement for SPH-400/ SPH800 (without Pad Kit)

* Replacement Carbon Media , Same as AG119 but w/o pad

 AG097 Spec. Download

Carriage Assembly without PCB for GCC Expert 24

Carriage Assembly without PCB(EX-24 LX) for GCC Expert 24

For: GCC Models Spirit SLS\S290LS (Before Serial #: I50790)

For Models Spirit Si & SGE Before Serial #: I50790

For Models Spirit Si & SGE After Serial #: I50790

Carriage, Lens Carriage Assembly w/o Lens and Mirror (Before SN: I50790), Spirit GX

Kit Notes: Clean Air Feed Cowl 1500i/2000i
Machine Model: For 1500i/2000i
Export Notes: HTS Code #: 8421392090, Made in the UK-England

Collet, 1/4"(6.35mm) for: Roland DGA EGX350/EGX400/EGX600, MDX-40, SRM-10, JXW-10
This 6.35mm Collet (Product #ZC-23-635) is for use with bottom loading end mills. It is compatible with the following Roland DGA devices: JWX-10, EGX-300/400/600, MDX-40, and SRM-10.

Collet, 1/8", ZC-23-3 Solid Split Bottom Load Collet 3mm (.125") For: DE-3, EGX300/EGX350/EGX400/EGX600

This 3mm Collet (Product #ZC-23-3) is for use with bottom loading end mills. It is compatible with the following Roland devices: JWX-10, EGX-300/400/600, MDX-40, and SRM-10.

Collet, Split, Top Load Collet 3.175mm PNC2300A (1,8") For: EGX300/ EGX350/EGX360

This 3.175mm Collet (Product #ZC-23-3175) is for use with bottom loading end mills. It is compatible with the following Roland devices: JWX-10, EGX-300/400/600, MDX-40, and SRM-10.

Collet, 11/64", Solid Bottom Load Collet 4.36 MM (.171") 

For: DE3/EGX350/EGX400/EGX600, Half Round Cutters

This Collet Holder (Product #1000003391, alternative to discontinued # 21655242) is used with standard cutting tools in the EGX-350. It should not be used with pass-through collets. This holder prevents the cutting tool from dropping through the spindle and damaging the engraving material.

Collet, 11/64", ZC-E436 Solid Bottom Load Collet (.171") For EGX300\EGX350\PNC-2300A\EGX400\600, Burnishing - Diamond Guide

This Bottom Loading Burnished Guide (Product #ZC-E436) is intended for use with the Roland EGX-Series engravers. The guide is designed for diamond drag applications and must be used with diamond engraving burnishing tools.

Collet, 6mm for EGX-300/EGX350/EGX400/EGX600600, JWX-10, MDX-40

This 6mm Collet (Product #ZC-23-6) is for use with bottom loading end mills. It is compatible with the following Roland devices: JWX-10, EGX-300/400/600, MDX-40, and SRM-10.

Compressor for Air Assist-High Volume, 220Vac,3.18 CFM

A specially designed Air Compressor for laser engravers, by using an oil-less diaphragm, you help eliminate the harmful and damaging side effects of moisture on the laser optics. Also, provides the optimal air pressure your laser needs to blow away vaporized particles and helps prevents overheating. A must to keep lenses and mirrors clean to promote longer laser life. Recommended for production enviroments where laser will be operating eight (8) hours or more.

SPECS:
Voltage: 220vac
Power Consumption: 270 watts
Hz:50/60
Air capacity:86~95 L/min
Outlet pressure is 7~10 kg/cm2 (100~142psi)

Compressor for Air Assist, 115Vac-Low Volume, 58PSI

Low volume Air Compressor for laser engravers; help eliminate the harmful and damaging side effects of moisture on the laser optics. Also, provides the optimal air pressure your laser needs to blow away vaporized particles and helps prevents overheating. A must to keep lenses and mirrors clean to promote longer laser life. Recommended for LOW production enviroments where laser will be operating less than four (4) hours.

Speed Control, Purex Upgrade Pack-1
Export Notes: HTS Code: 8544.42.9090, Made in the UK-England
 

Kit Notes: 125mm - 80mm x 3.0m Connection kit

Machine Models: 400i/ 400i Dye Sub/ I Fume Orange,Violet,Green and Red 

Export Notes: HTS Code #: 8421392090, Made in the UK-England

• Diameter of customer's port = 125mm

• Length of hose = 3.0m

• Purex machine inlet diameter = 80mm

Notes: 100mm - 150mm, Hose Kit for 3 outlet laser

Export Notes: HTS Code: 8421392090, Made in the UK-England

Kit Notes: 75mm - 75mm x 1.5m Connection , Fume Buster

Export Notes: HTS Code #: 8421392090, Made in the UK-England

Switch, Remote ON\OFF For Purex Units, Foot Switch, 5M Cable

Machine Model:  Alpha / FumeCube
Export Notes: HTS Code: 8544.42.9090, Made in the UK-England
105114 Remote -Systems: Digital

*Interfacing Cables Brochure *

Notes: 50mm - 80 mm 
Machine Model: Xbase400

Export Notes: HTS Code: 8421392090, Made in the UK-England

Machine Model: 800i
Kit Notes: 3.25m x 100mm to 150 mm

Export Notes: HTS Code: 8421392090,  Made in the UK-England

Manuf # Contains: 1 x 100mm Female Coupling | 1 x 100mm Equal Tee | 4 x 90-120mm Hose Clips | 2 x 3m x 100mm Flexible Hose | 2 x 150-100mm Reducers | 2 x 0.25mm x 150mm Flexible Hose | 4 x 135-165mm Hose Clips

 

Kit Notes:  Antiistatic 50mm x 80mm,   CIJ 

Machine Model: 200/400/800i dual connection 

Export Notes: HTS Code #: 8421392090, Made in the UK-England

100027 Purex Fume Extractors

Kit Notes: 50mm S/S Flexible arm kit - clear hood cowl. Fume Cube Pro/ Fume Cube 1-2 Arms

Export Notes: HTS Code: 3917.39.0010, Made in the UK-England

Kit Notes: 125mm - 100mm x 3.0m Connection

Machine Models : 800i 2 Tier  / 800i 3Tier

Export Notes: HTS Code #: 8421392090, Made in the UK-England

Machines Model: : Purex 200 / 400 / 800i

Notes: 50mm pipe x 80mm x 3.0m ,Antistatic
Export Notes: HTS Code: 8421392090, Made in the UK-England

Kit Notes:

75mm Arm  (Does not come with the 840116 )

Machine Model:  650 Fume Extractor

Export Notes: HTS Code: 3917.39.0010, Made in the UK-England

Kit Notes: Black plenum cowl

Export Notes: HTS Code #: 8421392090, Made in the UK-England

Machine Model: FumeBuster
Kit Notes: Conical Cowl, Includes: 1 x 1.2m x 75mm flexible arms 1 x Conical cowl (840114) 
2 x 75mm Diam. Coupling (120707) 
Export Notes: HTS Code: 8421392090,  Made in the UK-England
 

Machine Model: FumeBuster
Kit Notes: Clean Cab Enclosed Hood (100183) 
Export notes: HTS Code: 8421392090,  Made in the UK-England
 

Filter Unit
Export Notes: HTS Code: 8421.99.0180, Made in the UK-England
Freight Class: 125, NMFC# 069100-03 

Kit notes: Clamped bench bracket

Export Notes: HTS Code #: 8421392090, Made in the UK-England

Kit Notes: 75mm Exhaust Port, complete Clean cab, Open hood (75 mm valve)
Export Notes: HTS Code #: 8421392090, Made in the UK-England

Kit Notes: Clean cab base downdraft with perforated steel plate

Export Notes: HTS Code #: 8421392090, Made in the UK-England

Kit Notes: Cleancab open hood (50mm valve)

Export Notes: HTS Code #: 8421392090, Made in the UK-England

KIt Notes: CleanCab, Top Lid Only, 75mm Exhaust Port 
Export Notes: HTS Code #: 8421392090, Made in the UK-England

Kit Notes: Clear Hood Cowl - Fits the 38mm Flexible Arm

Export Notes: HTS Code #: 8421392090, Made in the UK-England

Kit Notes: Complete cleancab, open hood, downdraft base

Export Notes: HTS Code #: 8421392090, Made in the UK-England

Notes: 95mm ID, 3 3/4"
Export Notes: HTS Code #: 8421392090, Made in the UK-England

Kit Notes: PVC Cuffs 51mm
Export Notes: HTS Code: 8544.42.9090, Made in the UK-England
 

Notes: Fits the 38mm Flexible Arm

Export Notes: HTS Code #: 8421392090, Made in the UK-England

Manifold, Dual Inlet Aluminium Manifold
(1 x 80mm to 2 x 50mm inlets)
Export Notes: HTS Code: 8544.42.9090, Made in the UK-England
 

Machine Model: X Base / Alpha / Laserex 200i / 400i / 400 / Ebase / 400i Dye Sub / 800i 3Tier/ 800i 2 Tier
Kit Notes: LinkBase, 2.3m x 100mm to 80mm,   (GCC 4")
Export Notes: HTS Code: 8421392090,  Made in the UK-England
 

Machine Model: Xbase
Kit Notes: 1.3m x 80mm to 80mm
Export Notes: HTS Code: 8421392090,  Made in the UK-England
 

Machine Model: 800i
Kit Notes: 2m x 200mm to 100mm (8" Port for GCC-X380)
Export Notes: HTS Code: 8421392090,  Made in the UK-England
 

Machine Model: Xbase / Pur 35 / Ebase
Kit Notes: 1.3m x 100mm to 80mm 
Export notes: HTS Code: 8421392090,  Made in the UK-England
 

Machine Models : 1500i/1750i/2000i
Kit Notes:1.5m x 150mm to 150mm
HTS Code: 8421392090,  Made in the UK-England

Item Code:120280

Machine Model:1500i/2000i/1750i
Kit Notes: 3m-Dual x 150mm to 100mm
Export Notes: HTS Code: 8421392090,  Made in the UK-England

Item Code: 120287- PUREX 

Kit Notes: 3m x 100mm
Machine Model: 800i
HTS Code: 8421392090,  Made in the UK-England
 

Notes: 150mm -80mm 3.3m
Machine Model: 200 / 200i / 400 / 400i

120289, Purex 

Machine Models : I Fume 400i Orange,Violet,Green,Red,PVC and Ozone./200/200i/400/400i/400i PVC and 400i Dye Sub
Kit Notes: 3m x 80mm
Export Notes: HTS Code: 8421392090,  Made in the UK-England

Purex 120299, 80mm Engraving Connection Kit  80mm Engraving Kit

Kit Notes:3m x 80mm to 51mm
Machine Model: 200/400/200i/400i/Alpha 
Export Notes: HTS Code: 8421392090,  Made in the UK-England
 

Machine Models: 400i/ 400i Dye Sub/ I Fume Orange,Violet,Green and Red 
Kit Notes: 100mm - 80mm x 2.0m Dual
Export Notes: HTS Code: 8421392090,  Made in the UK-England

Kit Notes: 50mm x80 mm x 2.0m. length

Machine Model: 200/200i/400/400i

Export Notes: HTS Code: 3917.39.0010, Made in the UK-England

Kit Notes: Coding Extension 50mm - 50mm x 6.0m
Machine Model: 200 /200i / 400 / 400i
Export Notes: HTS Code: 8421392090, Made in the UK-England