X

Laser & Rotary Machine Stock Material From IPI Plastics

Phenolics Vs. Innovative Plastics Impact Modified Acrylic

IPI’s ultimate laser engraving series, 55 stock products, in front and reverse engravable versions and a variety of colors and looks. UV-stable for exterior as well as interior use. Laserables have the most durable micro-surface in the industry, . 0025”, which allows user to laser engrave and/or profile cut with superior ease and quality.

UL Certified


The Laserables Series Laserables - Front Engravables.


A wide spectrum of the engraving industry's most popular colors, available in Matte finish. (Micro-satin or gloss available as custom only.)

 

 Material  Micro-surfaced ABS
 Sheet Size  24" x 48"
 Thickness  1/16"
 Usage  Interior Signage, Personal   Identification
 Cutter  Rotating carbide
 Cutting Depth  .003"
 Fabrication  Scores, Shears, Heat   bendable, No predrilling

 Other Features

 Bonds, Hot stamps,   Silkscreens, Permits detailed   engraving

 Products listed are readily available in 2-ply 1/16”.
Most products can be produced in 2-ply 1/32” or 1/8” and 3 ply 1/16” or 1/8”. Call for specific details on availability and/or minimum order.

Plastic cleaning Recommendations and Tips:

All IPI products are manufactured in the USA and are available only through your Authorized IPI distributor

Note: The information is given in good faith, but no warranty, express or implied, is given.

Distributed by: Jorlink USA, Inc. | Greensboro-NC USA | Tel: (336) 288-1613 | sales@jorlink.com | www.JORLINK.com
 

Cleaning Recommendations

Tips for cleaning Jorlink's Distributed IPI Plastic materials:

1. As a general rule, IPI recommends using mild soap and water whenever possible.

2. Test a piece of scrap or small area of the material before cleaning entire piece.

3. Use only soft cloths or sponges for cleaning. Do NOT use Brillo®/S.O.S.® pads or steel wool.

4. Use a Q-Tip® to clean small areas.

5. Rinse with warm water.

6. Ultrasonic cleaning is NOT RECOMMENDED for any IPI material.

7. To remove dust from engraved areas, try compressed air before any solvent cleaner.

8. Cleaners with abrasives, such as Comet® brand cleaner, are not recommended.

Some plastic materials such as Red on White are difficult to laser engrave because of the nature of laser heat

and the pigmentation bonding to the bottom lawyer; if the above recommendation fails try the following tips.

IPI Plastics cleaning tips:

Tip # 1: We recommend straight rubbing alcohol, after you should wipe off with damp soft cloth and wipe dry.

Tip # 2: Engrave from the bottom –up less residue, and the laser could be too hot, check setting. Our GCC

Print Driver as other drivers has option of PRINTING from Bottom to Top.

Tip #3: If the above tips do not work, you may need to attempt engraving a second pass on the material to

completely remove the pigments.
 

Go
200
200

product parts

10/10/2023
MPE-200-0LX2101D.120
0LX2101D, 0LX2100D, 081026D, 080026D,
0021
26"x28"x46" 68Kg, Packed
150 lbs
$4,056.00
2000i
12/17/2013
MPE-0LX2011D
0LX2011D, 0LX2010, 022120iD, 022121iD,
.0035
72 kg 33"x 34"x63"
158 lbs
$10,697.00
200225-Pre-Filter Pad
12/17/2013
MPEF-200225
PreFilter
Ship Dim´s: 31 x 28 x 26 cm, 0.5 kg.
Ship Dim´s: 12.2 "x 11"x 3.1 "
1.1 lbs
$65.00
20600036 Y axis carriage Belt for Puma 30 (2GT-T520-W9)
11/4/2020
MVG-20600036
20600036
order with 20600035
1 lbs
$41.20
20600037 Y axis carriage belt for Puma II 30 (2GT-T515-W9)
11/4/2020
MVG-20600037
20600037
order with 20600035
1 lbs
$41.20
20600038G Y axis carriage Belt for Puma II-132 / Puma III-132- 2GT-T1527-W9
11/4/2020
MVG-20600038G
20600038G
order with 20600035
1 lbs
$67.20
20900376 Flat Cable for Lynx 30 60 / Puma I 30 60 8 pin
11/4/2020
MVG-20900376
20900376
PC00053B
0.3 lbs
$19.95
21500021G Flash ROM (DIP) (A290021T-70F) for Puma
11/4/2020
MVG-21500021G
21500021G
LH02014C
0.06 lbs
$10.00
23400024G Control Panel Sticker for Puma 3
11/4/2020
MVG-23400024G
23400024G
0.06 lbs
$18.00
234000430G Control Panel Sticker for Puma 4
11/4/2020
MVG-234000430G
234000430G
0.06 lbs
$18.00
29000864 GCC -Mainboard for Lynx 60/30 and Puma I
11/3/2020
MVG-29000864
29000864
BK00060F
2 lbs
$599.00
29000866G-Pen Force PCB Assembly for Lynx and Puma I
11/3/2020
MVG-29000866G
29000866G
BK00063B
0.2 lbs
$15.00
29000869 GCC-Carriage PCB for Lynx 60 -132 and Puma I -60
11/3/2020
MVG-29000869
29000869
BK00064F
0.75 lbs
$42.00
29002289-Main Board for Puma II 30
11/3/2020
MVG-29002289
29002289
BK02132F
1 lbs
$627.20
29003340- Carriage PCB Assembly for Puma 30
11/3/2020
MVG-29003340
29003340
BK02109A
0.2 lbs
$68.00
29004690G Carriage Assembly For Puma III
11/3/2020
MVG-29004690G
29004690G
1 lbs
$225.00
Jorlink USA, Inc,
3714 Alliance Dr., Suite 100
Greensboro, NC 27407
TEL: (336) 288-1613
eMail: sales@jorlink.com

M-F 9am-5pm EST 
Facebook Linkedin twitter Instagram YouTube
Jorlink USA, Inc. BBB Business Review