Laser Equipment Ideal For The Hobbyist

GCC-290120540G - 5272 Driver Board in Common Assembly with Interlock for Touch Screen  for E200

60-Min. 1-On-1 Diagnostic Troubleshooting Phone Call (Hardware\Electronics\Laser Tube Issues)

(After your purchase, a Jorlink representative will be in touch to arrange the meeting time and to provide you with a meeting link. Please be sure to select a preferred timeframe)

Disclaimer: (a) We will do our best to troubleshoot and evaluate the problem and attempt to reach a solution. This will require clients to adjust and repairs on their own with our remote assistance and instructions. Parts may need to be purchased with a no-returns policy unless you have an active membership in our yearly 365-Support program.

(b) A per event/case call will be limited to fifty minutes (60 min Max); if the problem has not been resolved within this time, we will provide other suggestions for on-site service or additional paid services.

(c) We recommend having a person on-site with experience in the Electro-Mechanical field assist as there is electrical testing with a digital voltage meter that may be required.  CAUTION MUST be taken when around electricity or working to measure laser tube power, use protective eyewear or any other safeguards.

(e) REPAIRS ARE NOT GUARANTEED, please discuss with your Sales Rep. on upgrades and credits for our services with any trade-in equipment.

630340 Knob, Flow Control Adj. 23mm w/Arrow, Purex System: FumeCube Dual

Cascade, in-line filter for 400i/800i comes with 100186 (100mm) connection kit, includes filter 111107 ~F7 (Reusable) or 111117 F8/F9 (Single use).

Note: The Cascade Box is fitted with a silicone vacuum sensing tube. The tube should be connected to the inlet on all vacuum machines. It should not be connected to volume machines.

Length: 430mm, Width: 430mm, Height: 1063mm, Weight: 30Kg
DIM's: Box on a Pallet  95Lbs\35Kg, 25"x25"x51" (66x66x130cm)

MUST ship Truck Freight

90-Minutes, 1-On-1 Diagnostic Troubleshooting Phone Call, Level II Tech.  (Hardware\Electronics\Laser Tube Issues\Software, Firmware, Driver Troubleshooting)

(After your purchase, a Jorlink representative will be in touch to arrange the meeting time and to provide you with a meeting link. Please be sure to select a preferred timeframe)

Disclaimer: (a) We will do our best to troubleshoot and evaluate the problem and attempt to reach a solution. This will require clients to adjust and repairs on their own with our remote assistance and instructions. Parts may need to be purchased with a no-returns policy unless you have an active membership in our yearly 365-Support program.

(b) A per event/case call will be limited to ninety minutes (90 min Max); if the problem has not been resolved within this time, we will provide other suggestions for on-site service or additional paid services.

(c) We recommend having a person on-site with experience in the Electro-Mechanical field assist as there is electrical testing with a digital voltage meter that may be required.  CAUTION MUST be taken when around electricity or working to measure laser tube power, use protective eyewear or any other safeguards.

(e) REPAIRS ARE NOT GUARANTEED, please discuss with your Sales Rep. on upgrades and credits for our services with any trade-in equipment.

A2033 Satin, Anodized Black Aluminum 12" X 24" .025" Sheet (1pc)

AAASII Carriage Board Assembly for Expert 24LX  / Expert II 24LX  / Puma III