X

There are currently no items in your shopping cart.
SRM-20, Engraving Accessory Kit for SRM-20
SRM-20, Engraving Accessory Kit for SRM-20
Seller: ( 0 ) Jorlink
Feedback: There are currently no ratings.
6/20/2023
MR-SRM20ACCKIT
5 lbs
$695.00

SRM-20 Kit

Includes:

Software: Vectric software improves SRM-20 engraving capabilities and ease of use.

   Diamond Drag Tooling :For Metal Scribing
Spring-loaded tool enables for scribing on metal, with pressure averaged across the material surface.

   V-Bit Tooling: For Rotary Engraving
Short reach tooling to fit the SRM-20 spindle, used in conjunction with the 1/8” collets.

  Collets: 1/4” and 1/8” collets are included to ensure compatibility of V-Bit tooling and diamond drag tooling.

  Bed Offset Hardware :Threaded offsets raise the surface bed height to allows for full Z-axis travel when using short reach tools.

  Indexing Fixture: Allows for easier material positioning

Centering Vise : Allows for easy loading and unloading of unconventional gift items.

 AS-10 Sheets: Adhesive hold-down sheets help keep material and fixtures in place during operation.

 

 

 

Data Sheet Engraving and Gift Making
 

 

MODEL SRM-20
Cuttable Material Modeling Wax, Chemical Wood, Foam, Acrylic, Poly acetate, ABS, PC board
X, Y, and Z Operation Strokes 8 (X) x 6 (Y) x 2.38 (Z) inches,
203.2 (X) x 152.4 (Y) x 60.5 (Z) mm
Workpiece table size 9.14 (X) x 6.17 (Y) inches,
232.2 (X) x 156.6 (Y) mm
Distance From Collet Tip to Table Maximum, 5.15 in
(130.75mm)
Loadable Workpiece Weight 4.4 lbs (2kg)
X-, Y-, and Z-Axis Drive System Stepping motor
Operating Speed 0.24 – 70.87inch/min,
6 – 1800mm/min
Software Resolution 0.000039 inches/step (RML-1), 0.000039 inches/step (NC code),
0.01 mm/step (RML-1), 0.001mm/step (NC code)
Mechanical Resolution 0.0000393 inches/step,
0.000998594 mm/step
Spindle Motor DC motor Type 380
Spindle Rotation Speed Adjustable 3,000 – 7,000 rpm
Cutting Tool Chuck Collet method
Interface USB
Control Command Sets RML-1, NC code
Power Requirements Machine: DC24V, 2.5A,
Dedicated AC adapter: AC 100-240V ±10%, 50/60Hz
Power Consumption Approx. 50W
Operating Noise During operation: 65 dB (A) or less (when not cutting),
during standby: 45 dB (A) or less
External Dimensions 17.76 (W) x 16.80 (D) x 16.78 (H) inches,
451.0 (W) x 426.6 (D) x 426.2 (H) mm
Weight 43.2 lbs, 19.6 kg
Installation Environment Temperature of 41 to 104 °F (5 to 40°C),
35 to 80% relative humidity (no condensation)
Included Items USB cable, AC adapter, Power cord, Collet (6mm, .236 inches), Collet set screw, Spanners (7,10mm / 0.28, 0.39 inches), Hexagonal wrench (size 2,3 mm / 0.059, 0.12 inches), Positioning pins, Double-sided tape, Start-up page guidance card, Cutting tools not included. Imperial sized collets and cutting tools not included.

 

System Requirements
Operating system (OS) Windows 7/8/8.1 (32-bit/64-bit edition)*
CPU Intel® Core 2 Duo or more (Core i5 or more recommended)
Memory (RAM) 1GB (2GB or more recommended)
Video card and monitor A resolution of 1,280x1,024 or more recommended
Free hard-disk space required
as a working space
100 megabytes or more recommended
Other requirements Internet connection and web browser,
Internet Explorer version 10 or more recommended

 

 

 

SRM-20 Engraver Accessories

MILLING

Part No. Description Price
EMB-125-2F-016 .016" Ball End Mill $38.99
EMB-125-2F-016L .016" Ball End, Mill Long $38.99
EMB-125-2F-031 .031" Ball End Mill $29.99
EMB-125-2F-031L .031" Ball End Mill Long $38.99
EMB-125-2F-063 .063" Ball End Mill $29.99
EMB-125-2F-063L .063" Ball End Mill Long $43.99
EMB-125-2F-125 .125" Ball End Mill $29.99
EMB-125-2F-125L .125" Ball End Mill Long $43.99
EMB-250-2F-250L .250" Ball End Mill Long $52.99
EMF-125-2F-016 .016" Flat End Mill $29.99
EMF-125-2F-016L .016" Flat End Mill Long $29.99
EMF-125-2F-031 .031" Flat End Mill $29.99
EMF-125-2F-031L .031" Flat End Mill Long $38.99
EMF-125-2F-063 .063" Flat End Mill $29.99
EMF-125-2F-063L .063" Flat End Mill Long $43.99
EMF-125-2F-125 .125" Flat End Mill $29.99
EMF-125-2F-125L .125" Flat End Mill Long $43.99
EMF-250-2F-250L .250in Flat End Mill Long $52.99
SM-20 SRM-20 Spindle Motor $104.99
SS-20 SRM-20 Spindle Unit $259.99
ZC-20-32 3.2mm- 1/8in SRM Collet $64.99
ZC-23-635 Collet, 1/4" for EGX-350, MDX-40/A, SRM-20, DE-3 $35.99

Make Your Purchase More Productive

 With A Support Plan

Carbon Media Refill for Quatro, QFAG097 for SPH-400/ SPH800 w/o Pad
QFAG097-NC-GPC
$199.50
11152
Belt, X Axis Carriage Long-Open For: X500-II & III (FHT-2" L300cm x W18x 130 L)
LGCC-206001860G
$195.00
10774
Cornermate Table, CM40A Model
MA2CM40A
$195.00
363
Board, USB Storage Disk Board Assembly with firmware (Red Board)
LGCC-290100500G
$195.00
11106
LEDs, Light Assy (Qty4) for: C180 (1&2), Explorer; Gaia (1&2)
LGCC-29004249G
$195.00
1019
Refurbished MCB, GCC Main Mother Board w/Firmware For Puma III-132 (52" Model)
MGV-290083180G.REF
$192.50
10686
Inside ring diamond drag cutter
RR-ZDC-N8000
$189.99
955
Nut, Leadscrew, 1/4P, 3S Anti-backlash, 2Pcs (PA912XY & 912S XY-axis)
R7009121
$189.20
Starting from: 2 items $179.74
713
Filter 111118, Purex Labyrinth Pre-filter
MPEF-111118
$187.00
10484
Connection Kit, Engraving
MPK-120206
$186.35
10864
Interfacing Kit
MPK-105108L
$186.23
8280
Filter, Water Filter, Activated Carbon for Roland EGX360
RR6700959010
$183.65
6153
Collet, 11/64" Solid Bottom For: DE3/EGX350/EGX400/EGX600
RR1000003391
$182.95
946
AM5253 AlumaMark Satin Brass- CO2 Laser Markable Aluminum .020", 20 x 24 Inch. Box 5 Sheets
ES-AM5253
$180.00
153
AM5271 AlumaMark - Matte Silver- CO2 Laser Markable Aluminum 20 x 24 Inch , Box 5 sheets
ES-AM5271
$177.00
147
Compressor for Air Assist-Low Volume, 115Vac, 1/5HP, Max. 58PSI
MGA-69434
$175.00
350
Connection Kit, 125mm/100mm x 3.0m
MPK-100172
$174.00
10483
Connection Kit, Stainless Steel Arm
MPK-120750
$174.00
10511
Connection Kit, Pipework
MPK-120270
$174.00
203
Connection Kit, Pipework 100170
MPK-100170
$174.00
210
Connection Kit, Engraving
MPK-120280
$174.00
207
Connection kit
MPK-100171
$174.00
10501
Plenum Cowl (Anti Static), Capture Kit Fumebuster
MPEA-100182
$171.00
734
Quatro AG169-Blue/White Pre-filter Pad (Pack of 25 Pre-filter F166)
QFAG169
$169.95
10749
Motor, Y Motor Assembly, P4-60; P4-60LX; P4-132; P4-132LX, Puma I/II/III 60 & 132 /Expert Pro
MGV-290096820G
$169.00
10978
Control Board, Laser MG380Hybrid Board (with MG380Hybrid installation program)
LGCC-290082180G
$169.00
11145
Motor, Y-Axis Motor Assembly, Puma I/II/III 60 & 132 /Expert Pro
MGV-29003812G
$169.00
10547
Nut, Leadscrew, 1/4P, 2S Anti-backlash (New Style)
R7009123
$168.00
720
Mirror, #1/#2/#3, 1.0" Diam. (X380\X252\MG380HYB\X500II/III\GAIA)
LGCC-290076790G
$165.00
617
LGCC-290077670G
$165.00
8263
Mirror, #4, 1" Dia.(X252/X380/MG380HYB/Mercury1,2,3,Venus 1&2)
LGCC-290069500G
$165.00
622
Raspberry Pi 3 Module B+ Model: E200
LGCC-216000980G
$161.00
11072
Connection Kit, Cleancab Open Hood
MPK-840159
$160.32
10524
Mirror, #1, 0.75" Diam. (C180 I-II)
LGCC-29002529G
$160.00
1018
Mirror 4, Carriage Mirror Holder Assy For E200
LGCC-290116710G
$160.00
11069
Mirror, #1, 1.0" Diam. (Explorer II-DEOS Tube)
LGCC-29000613G
$160.00
2063
Mirror #1, 0.75" Dia. for M/V/S/J/and E1 (Rev. 1)
LGCC-29001126G
$160.00
614
Connection Kit, Pipework
MPK-120262
$157.40
226
Power Supply, Board Aux.-Yellow 12vdc, 150w, LPP-150-12GC
LGCC-24500037G
$156.00
960
Filter 200262, Pre-Filter Absorbent Pad
MPEF-200262
$154.00
10979
Blades, Roland, 60 Degree/.50 Offset Premium Blade, 5 ea. - Sandblast
RVZEC-U3050
$151.99
11042
Connection kit, Stainless Steel Arm
MPK-120144
$151.58
10510
Blades, Roland, 60 Degree/1.00 Offset Premium Blade, 5 ea. - Thick Materials
RVZEC-U3100
$151.00
11043
Switch, Emergency Stop for EGX-350/EGX-300
RR13129111
$151.00
9373
Blades, Roland, 45 Degree/.25 Offset Premium Blade, 5 ea. - Standard Materials
RVZEC-U5025
$150.99
11045
Spindle, Roland EGX30\EGX30a (CS20) 1/8" Assy.
RR22805162
$149.95
892
Loom, Wire Hardness & Interface Switch ( 0 / 1) Purex System: FumeCube
MPEA-105085
$149.50
1022
Belt, X-Axis Roland EGX400 & EGX600
RR11929132
$149.50
11156
Jig, Set, Pen & Seal
MAJ4503.1
$148.50
528

 

If you need any assitance: 336-288-1613 
Email: sales@jorlink.com

FRAUD ALERT NOTICE

  1. Direct Delivery Only Service (Packages can NOT be redirected)
  2. Signature Required Deliveries (Adult I.D. and signature will be required)
  3. Jorlink will be calling to confirm new orders and ask additional information.

 

Secure Checkout

 

NOTE: Thank you for your order.  Orders will normally be shipped within 24-hours or less. 
RUSH orders will be shipped the same day if placed before 2pm EST and if in-stock.

If your equipment is down, please let us know as we will do our best to get you the product ASAP.

Read\Click Here for DAMAGE CLAIM POLICY 

  UPS Delivery Times from NC Zip Code 27407-Click Her for UPS Ground Delivery Link

 

 

TAX- The States in red require sales tax  for Roland Drop Shipped orders.  
Those charges will not be reflected in the checkout area however you will be contacted for payment of those charges. 
(CA, CO, FL, GA, IL, MA, MI, NJ, NY, PA, TN, TX, WA, WI, MN)
Our Checkout System Has Been Updated to Serve You Better
For personal assistance please use our contact form or call us at: (336)288-1613


 
 

 

 

 

Jorlink USA, Inc,
3714 Alliance Dr., Suite 100
Greensboro, NC 27407
TEL: (336) 288-1613
eMail: sales@jorlink.com

M-F 9am-5pm EST 
Facebook Linkedin twitter Instagram YouTube
Jorlink USA, Inc. BBB Business Review