X

 

SUPPORT TICKET

 
 

 

Beauty Salon Fume Removal Systems

Nail Salon Fume Removel

Nail polishes, polish remover and solvents put off odors and fumes which can cause discomfort and headaches.  Additionally, particulate for trimming and polishing nails and cuticles can become airborne and are mixed with respirable air.  From small units to centralized systems we can help remove these conditions making the environment healthier and more comfortable

Hair Salon Fume Removal

Hair treatment products for coloring, straightening and other processes can be very caustic and irritating. Both the stylist and the client alike can suffer from headaches, burning eyes, breathing issues and irritating odors which permeate throughout the salon.  Our extraction systems can filter the odors and vapor caused by these processes. Contact us for more information on what options are available.

Laser Cosmetics Clinic Fume Removal

When using a laser for cosmetics odors such as burning skin or hair can fill the air of the treatment room. Additionally, the skin and hair turn to air born particulate which become respirable.  Using a Purex fume extractor your treatment room becomes more comfortable for the doctor or technician as well as the client.

Salon fume removal machine quotes

 

All functions are fully automatic; all the user has to do is set the appropriate airflow on installation.
A dedicated control, monitoring and display system unique to Purex fume extractors.
Purex filter monitor units are in all our digital units; which is highly recommended for gases and chemicals emitted.
See all system features below:

  • Automatic Electronic Flow Control – Maintains A Constant Extraction Rate Even If The Filter Blocks
  • Adjustable Airflow
  • Clear And Informative Graphic Display
  • Gas And Particle Sensors On The Exhaust
  • Low Capital And Running Costs
  • Quick Change Patented Labyrinth Pre-Filters Deliver Longer Filter Life
  • Submicronic (Hepa) Filtration Removes 99.997% Of Particles Down To 0.3 Microns
  • Activated Carbon Filtrationremoves Harmful Gas
  • Interface With Other Equipment; i.e. Lasers
  • Simple To Install And Quiet In Operation
  • Easy To Relocate And Precision Made From Stainless Steel
  • High Performance Brushless Motors
  • Includes One 75Mm Ss Arm And One Clear Hood 420Mm X 320 mm
  • Additional Arm Item # 120197
  • Cabinetht. (Incl. Castors) 720 mm
  • Cabinet Depth 610 mm
  • Cabinet Width 445 mm
  • Cabinet Weight 50 Kg
  • Wattage 0.36kW; Frequency 50Hz/60Hz

Contact our team for more information about features and operation!

Purex Beauty Salon Fume Removal System

Custom Multi Station Systems Available 
Salon Fume Removal Systems

Brochure

 

 

Go
dn
Collar, Clamp, Large Collar, Clamp, Large, 11/64 Spindle-3 Pulley More Info
12/17/2013
R5005004.1
$75.50
Collar, Clamp, Spindle Collar, Clamp, 11/64 Spindle-1 Pulley (912, OD=1.25, ID=0.75) More Info
12/17/2013
R5014025.1
$75.50
Collar, Clamp, Spindle Collar, Clamp, Spindle 1/4 More Info
12/17/2013
R5005014.1
$75.50
Collet, 1/4”, ZC-23-635 Solid Bottom Load Collet (.250")
Collet, 1/4”, ZC-23-635 Solid Bottom Load Collet (.250")

Collet, 1/4"(6.35mm) for: Roland DGA EGX350/EGX400/EGX600, MDX-40, SRM-10, JXW-10
This 6.35mm Collet (Product #ZC-23-635) is for use with bottom loading end mills. It is compatible with the following Roland DGA devices: JWX-10, EGX-300/400/600, MDX-40, and SRM-10.

More Info
1/16/2015
RR-ZC23635
ZC-23-635
0.5 lbs
$44.95
Collet, 1/8", ZC-23-3 Solid Split Bottom Load Collet 3mm (.125")
Collet, 1/8", ZC-23-3 Solid Split Bottom Load Collet 3mm (.125")

Collet, 1/8", ZC-23-3 Solid Split Bottom Load Collet 3mm (.125") For: DE-3, EGX300/EGX350/EGX400/EGX600

This 3mm Collet (Product #ZC-23-3) is for use with bottom loading end mills. It is compatible with the following Roland devices: JWX-10, EGX-300/400/600, MDX-40, and SRM-10.

More Info
1/15/2015
RRZC233
ZC-23-3
0.5 lbs
$74.95
Collet, 1/8", ZC-23-3175 Solid Bottom Load Collet 3mm (.125")
Collet, 1/8", ZC-23-3175 Solid Bottom Load Collet 3mm (.125")

Collet, Split, Top Load Collet 3.175mm PNC2300A (1,8") For: EGX300/ EGX350/EGX360

This 3.175mm Collet (Product #ZC-23-3175) is for use with bottom loading end mills. It is compatible with the following Roland devices: JWX-10, EGX-300/400/600, MDX-40, and SRM-10.

More Info
1/16/2015
RRZC233175
ZC-23-3175
0.5 lbs
$74.95
Collet, 11/64" Solid Bottom For: DE3/EGX350/EGX400/EGX600
Collet, 11/64" Solid Bottom For: DE3/EGX350/EGX400/EGX600

Collet, 11/64", Solid Bottom Load Collet 4.36 MM (.171") 

For: DE3/EGX350/EGX400/EGX600, Half Round Cutters

This Collet Holder (Product #1000003391, alternative to discontinued # 21655242) is used with standard cutting tools in the EGX-350. It should not be used with pass-through collets. This holder prevents the cutting tool from dropping through the spindle and damaging the engraving material.

More Info
1/16/2015
RR1000003391
1000003391
0.5 lbs
$182.95
Collet, 11/64", ZC-E436 Solid Bottom Load Collet (.171")
Collet, 11/64", ZC-E436 Solid Bottom Load Collet (.171")

Collet, 11/64", ZC-E436 Solid Bottom Load Collet (.171") For EGX300\EGX350\PNC-2300A\EGX400\600, Burnishing - Diamond Guide

This Bottom Loading Burnished Guide (Product #ZC-E436) is intended for use with the Roland EGX-Series engravers. The guide is designed for diamond drag applications and must be used with diamond engraving burnishing tools.

More Info
1/16/2015
RRZCE436
ZC-E436
1 lbs
$44.95
Collet, 6mm for EGX-300/EGX350/EGX400/EGX600600, JWX-10, MDX-40
Collet, 6mm for EGX-300/EGX350/EGX400/EGX600600, JWX-10, MDX-40

Collet, 6mm for EGX-300/EGX350/EGX400/EGX600600, JWX-10, MDX-40

This 6mm Collet (Product #ZC-23-6) is for use with bottom loading end mills. It is compatible with the following Roland devices: JWX-10, EGX-300/400/600, MDX-40, and SRM-10.

More Info
1/16/2015
RR-ZC236
ZC-23-6
$45.00
Compressor for Air Assist-High Volume, 110Vac,3.18 CFM
Compressor for Air Assist-High Volume, 110Vac,3.18 CFM

Compressor for Air Assist-High Volume, 110Vac,3.18 CFM

A specially designed Air Compressor for laser engravers, by using an oil-less diaphragm, you help eliminate the harmful and damaging side effects of moisture on the laser optics. Also, provides the optimal air pressure your laser needs to blow away vaporized particles and helps prevents overheating. A must to keep lenses and mirrors clean to promote longer laser life. Recommended for production enviroments where laser will be operating eight (8) hours or more.

SPECS:
Voltage:100~115vac
Power Consumption:270Watt
Hz:50/60
Air capacity:86~95 L/min
Outlet pressure is 7~10 kg/cm2 (100~142psi)

More Info
12/17/2013
MGA-29001054G
29001054G
1.2
21 lbs
$600.00
up
Jorlink USA, Inc,
3714 Alliance Dr., Suite 100
Greensboro, NC 27407
TEL: (336) 288-1613
eMail: sales@jorlink.com

M-F 9am-5pm EST 
Facebook Linkedin twitter Instagram YouTube
Jorlink USA, Inc. BBB Business Review