Spindle, Roland EGX30\EGX30a (CS20) 1/8" Assy.

Spindle, Roland EGX350, 1164" Assy. with Belt 
Note: After you replace the spindle, you need to run it without any load with no tool or Collet installed for approximately 20 minutes. (90 Day Warranty)

Spindle, Roland EGX400/600, 1164" Assy. w/o Collet or Micrometer (90 Day Warranty)

Note: After you replace the spindle, you need to run it without any load with no tool or collet installed for approximately 20 minutes at 15000-RPM

• Six Wattages Available
• With Standard: Red Pointer
• Air Assist
• Automatic Focusing of Z Axis
• 2 Year Parts Warranty
• Work Area: 25" x 18" (640mm X 460 More Info
  Date Created

  12/17/2013
  Item code

  MGCCL-
  ISBN

  A3

Sprinkler, Flame Sprinkler System for: Spirit  Si, SLS, SGLSHYB, Mercury (MSRP $714)
Laser cutting and engraving operations using the flame sprinkler system protects the operator, machine, and the work products from potential fire hazards. During the engraving process, flaming may occur when working with combustible or easily-flammable materials, such as paper or wood. The flame sprinkler system is an optional item that automatically ejects gas to extinguish flames when they reach 68°C/155°F moments after the onset of the fire.

Response element and temperature: Fusible alloy@68°C (155°F)
Working pressure range: 0.1-1.2Mpa
Bulked coupling: 1/2” PT
Recommended Gas: CO2/N2/Dry Powder

Square Bar, Jaguar 101

SRM-20 Kit

Includes:

Vectric software SRM-20 , Diamond Drag , Tooling , V-Bit Tooling , 1/4” and 1/8” Collets , Bed Offset Hardware , Indexing Fixture , Centering Vise , AS-10 Sheets

AR-24 Stand

 290090440G Stand Assembly Including Package for the best choice in a beginner cutting plotter.

Spindle, Roland EGX30\EGX30a (CS20) 1/8" Assy.

Spindle, Roland EGX350, 1164" Assy. with Belt 
Note: After you replace the spindle, you need to run it without any load with no tool or Collet installed for approximately 20 minutes. (90 Day Warranty)

Spindle, Roland EGX400/600, 1164" Assy. w/o Collet or Micrometer (90 Day Warranty)

Note: After you replace the spindle, you need to run it without any load with no tool or collet installed for approximately 20 minutes at 15000-RPM

• Six Wattages Available
• With Standard: Red Pointer
• Air Assist
• Automatic Focusing of Z Axis
• 2 Year Parts Warranty
• Work Area: 25" x 18" (640mm X 460 More Info
  Date Created

  12/17/2013
  Item code

  MGCCL-
  ISBN

  A3

Sprinkler, Flame Sprinkler System for: Spirit  Si, SLS, SGLSHYB, Mercury (MSRP $714)
Laser cutting and engraving operations using the flame sprinkler system protects the operator, machine, and the work products from potential fire hazards. During the engraving process, flaming may occur when working with combustible or easily-flammable materials, such as paper or wood. The flame sprinkler system is an optional item that automatically ejects gas to extinguish flames when they reach 68°C/155°F moments after the onset of the fire.

Response element and temperature: Fusible alloy@68°C (155°F)
Working pressure range: 0.1-1.2Mpa
Bulked coupling: 1/2” PT
Recommended Gas: CO2/N2/Dry Powder

Square Bar, Jaguar 101

SRM-20 Kit

Includes:

Vectric software SRM-20 , Diamond Drag , Tooling , V-Bit Tooling , 1/4” and 1/8” Collets , Bed Offset Hardware , Indexing Fixture , Centering Vise , AS-10 Sheets

AR-24 Stand

 290090440G Stand Assembly Including Package for the best choice in a beginner cutting plotter.