RAM, Chip, 32MB Memory, SIMM, 72-Pin, (Explorer/Spirit)
RAM, Chip, 32MB Memory, SIMM, 72-Pin, (Explorer/Spirit)
More Info
Sorry, you have entered an invalid value !
|
Sorry, you have entered an invalid value !
|
Sorry, you have entered an invalid value !
|
Rotary Attachment for GCC C180-I & II Laser
Rotary Attachment for GCC C180-I & II Laser
Engraving on cylindrical or spherical objects has always been considered to be complicated and problematic. These objects are difficult to pinpoint, and cannot rotate freely when engraving takes place, given that engraving is only possible in small or restricted areas. However, now through LaserPro's Rotary Attachment device, engraving on cylindrical and sphere-shaped objects will become simple and effortless.
|
LaserPro Application Lab had previously introduced Rotary Attachment in the showcase titled Sip A Drink From Your Own Personalized Glass Cup, but there are still users who are not familiar with the Rotary Attachment's capabilities. Therefore we will attempt to simplify the setup process and clarify positioning modes, advocating to ease the initialization phase for our users. |
Moreover, we will exhibit steps to apply the Position Mode and demonstrate how to utilize its Driver functions to efficiently complete all settings. Users are no longer required to spend unwarranted time so as to modify required and precise positioning; they will be able to engrave on demand. We believe that all users will love this new and thoughtful addition. |
|
Click Here to see C180 Rotary Attachment Setup.
Click Here to see Tennis Ball rotary laser engraved.
|
C180II’s rotary attachment.
Work Piece Limitations
|
|
Maximum Length
|
|
250mm (9.8 inches)
|
|
Maximum Loading Weight
|
|
3 kg (6.6 lbs.)
|
|
Minimum Diameter (Small Conical Fixture)
|
|
12 mm (0.5" inches)
|
|
Maximum Diameter (Small Conical Fixture)
|
|
50 mm (1.9" inches)
|
|
Minimum Diameter (Large Conical Fixture)
|
|
90 mm (3.5" inches)
|
|
Maximum Diameter (Large Conical Fixture)
|
|
120 mm (4.7" inches)
|
|
Maximum Outer Diameter
|
|
176 mm (6.9 inches)
|
|
Exchange the Conical Fixtures:
Depending on the shape of the workpiece, you can exchange different designs of front and back fixtures to fit the materials as below illustration.
More Info
Sorry, you have entered an invalid value !
|
Rotary Attachment for Mercury, Explorer or Spirit Si\LS\SGX\SGE \ X-Series
Rotary Attachment for Mercury, Explorer or Spirit Si\LS\SGX\SGE\ X-Series Lasers
WORKPIECE LIMITATIONS:
Max. Length: 450 mm (17.71 inches) for 29001051G
Max. Loading Weight: 7 kg (15 lbs.)
Minimum Diameter (Small conical fixture) 12 mm (0.5 inches)
Maximum Diameter (Small conical fixture) 50 mm (1.9 inches)
Minimum Diameter (Large conical fixture) 90 mm (3.5 inches)
Maximum Diameter (Large conical fixture) 120 mm (4.7 inches)
More Info
Sorry, you have entered an invalid value !
|
Rotary Attachment For T500 with 45 Deg. Tilt
Rotary Attachment For T500 with 45 Deg. Tilt,
Specification information:
Maximum Length: 1000 mm (39.2")
Maximum Loading Weight: 4 kg (8.8 lbs.)
Minimum Diameter: 0.5 mm (0.02 inches)
Maximum Diameter: 120 mm (4.7 inches)
More Info
Sorry, you have entered an invalid value !
|
Rotary Attachment for X500-III Laser
Rotary Attachment For GCC: X500-III
Max Length: 1020mm (40inch)
Max Loading Weight: 4 kg (8.8 lbs.)
Min Diameter: 7 mm (0.27")
Max Diameter: 120 mm (4.33")
Allows the laser system to perform at another level! By using the rotary attachment, engraving on cylindrical or round objects is now possible. This option uses a fourth axis to rotate your object 360° to allow engraving on cups, wine glasses or even a baseball with two types of conical fixture available. The minimum inner/maximum outer diameter and length of the working object is 7 mm / 120 mm and 1020 mm respectively. Its maximum weight should not exceed 4kgs.
HTS#: 8466.93.5385
More Info
Sorry, you have entered an invalid value !
|
Sorry, you have entered an invalid value !
|
Sorry, you have entered an invalid value !
|
Sorry, you have entered an invalid value !
|