Left Cover for GCC Expert 24

Right Cover for GCC Expert 24

GCC 241006540G Wheel for AR-24 Pinch Roller

GCC 241006690G Switch Cam, Puma IV (black)

Side Support Left(Black) for GCC Expert 24

Side Support Right(Black) for GCC Expert 24

For: GCC Expert 24/52 & Sable Vinyl Cutters

65W/2 Output Switching PS (24/2A 5V/3.5A, PD-65B)

For: Cutters/Laser excluding AR 24 & iCRAFT

26100003 GCC- Voltage Regulatory  for Lynx 30 60 and Puma I 30-60- Puma II 30)

GCC 26500059G Blade, 60 DEGREE, for standar sandblast GCB-460SO

Model: RX, Jaguar 1-4, Puma 1-3, Bengal, Sable, Expert series  

GCC Video:  Use of cutting blades (By Color)

GCC 26500060G Blade, 50 DEGREE, GCB-500, For Cutting Small Letters( 1pc)

Model: RX, Jaguar 1-4, Puma 1-3, Bengal, Sable, Expert series

GCC Video:  Use of cutting blades (By Color)

26500112G Pad, Cutting Pad, White, W 6mm, L 10m (for all cutters except i-Craft/AR-24)

All GCC Cutters excluding iCraft/AR24)

GCC 265012020G Blade, 60 DEGREE, Green-cap Blade 2.0mm diameter  for cutting thick material, Flock 8.5mm  thick (1 pc)

Model: RX, Jaguar 1-4, Puma 1-3, Bengal, Sable, Expert Series

GCC Video:  Use of cutting blades (By Color)

265016770G GCC-Pad

(W 6mm* L 10m) Black

Blades, GCC, 1 Pcs, 25 Deg., 2.5mm Diam., Yellow Cap, Std Force for Black Plate Holder

App\Models: Cutting Thin Materials or Window Ting \ AR-24/ i-Craft/EXII/Jaguar V/Puma IV

GCC Video:  Use of cutting blades (By Color)

GCC 265017540G Blade, 60 DEGREE, Green Blade 2.5mm diameter  (1pc)

Model: i-Craft / AR-24 / EXII / Puma IV / Jaguar V / RXII

GCC Video:  Use of cutting blades (By Color)

Blade, 60 DEGREE, Blue Cap Blade / 0.25 mm blade offset / 2.5 mm diameter (1pc)

For cutting thin sandblast mask and stencil with friction feed or sprocket feed machine 

Model: i-Craft/AR-24/ EXII/Puma IV/Jaguar V/RXII

GCC Video:  Use of cutting blades (By Color)

GCC 265017560G Blade, 50 DEGREE/ 0.175mm blade offset/ 2.5mm diameter (1pc) Black Cap Blade.

For cutting small text and fine detail. Sharp blade with smallest offset

Model: i-Craft/AR-24/ EXII/Puma IV/Jaguar V/RXII

GCC Video:  Use of cutting blades (By Color)

GCC 265019700G Blade, 45 DEGREE, Red Blade 2.5mm diameter 1pc/pk (w/package), for RXII & J5 series  (This blade is for black blade holder 2.5 it will not work for the gold holder)

GCC Video:  Use of cutting blades (By Color)

29000864  GCC -Mainboard for Lynx 60/30 and Puma I

29000866G-Pen Force PCB Assembly for Lynx and Puma I

29000869 GCC-Carriage PCB  for Lynx 60 -132  and Puma I -60

29000871G - Control panel PCB Assembly for Puma I & II

29001437G  Roller,Pinch Roller Assembly, Lynx/Bobcat/Expert Pro/Puma II/Puma III/Puma IV

PCB Board, Tool Carriage Board Assembly, Puma II - 30 & 60/Bengal (BK02062)

Pulley, Y-Axis Idler Pulley Assembly for GCC Expert 24

29001549G - Carriage PCB Assembly for Puma II

29002289-Main Board for Puma II 30 

GCC 29002348G Roller, Pinch Roller Assembly, All Jaguar series/Ultra

29002613G Carriage, Tool Carriage Assembly w/o PCB, Puma/Bengal/Expert Pro (BK02040), for Puma I and II

Carriage Assembly without PCB for GCC Expert 24

29003340- Carriage PCB Assembly for Puma 30

Pulley, Y-Axis Pulley Assembly

Motor, Y Motor Assembly, Sable 60 / EX-24 / EXII-24/ EX-24LX / EXII-24LX / EX-52 /EXII-52 / EX-52LX / EXII-52LX

Motor, X-axis For: GCC Expert 24 

Motor, Y-Axis Motor Assembly, Puma I/II/III 60 &132 /Expert Pro, Bobcat 60

Roller, Pinch Roller, Sable/Bengal/Expert/Expert LX

Limit switch Assembly - Sable for GCC Expert 24

AAASII Carriage Board Assembly for Expert 24LX  / Expert II 24LX  / Puma III

For: GCC Puma III

29004692G- Control panel Assembly for Puma III

29005210G  Carrier guide roller  Assembly For Puma I-III  (DU type) 

29005256G - Watch Dog-Interface Converter Board Assembly, Jaguar II/III/IV (no watch dog for J5 series)

The Watchdog is usually located on the side of the machine, where the white ribbon cable connects, the control panel and motor run through it.

Panel, Control Panel Board Assembly (LMC-STC2A20DRG-011)
For: Jaguar II,III,IV/Pume II, III/VOGUE/Expert Pro

29005344G -GCC  Watch dog board Assembly for Puma III

Sensor, AAS II Sensor Assembly w/Bracket for Puma III

29005383G- GCC 2 in 1 Cutter mainboard with Puma II firmware (for Service)

Control Panel Assembly, Expert-24

GCC 29005951G Holder, Ball Point Pen Holder Assembly w/Package