290096810G  X-Axis Motor Assembly for Puma4-60; Puma4-60LX

Motor, Y-Axis Motor Assembly, Puma I/II/III 60 &132 /Expert Pro

GCC Vinyl Cutter Puma 4-60, P4-60LX; P4-132; P4-132LX 52

3-Months Manufacturer's Warranty

HTS#: 8466.93.9585

290096840G  X-Axis Motor Assembly for Puma4-132; Puma4-132LX

290096900G Cover-Lid, Top Green  PV, Lid for Spirit, GLS Laser, CO2/ Fiber Hybrid

GCC-290096940G  Mirror 4, (Carriage Mirror)
Machine Models:  Spirit: Hybrid CO2+Fiber Lasers,

HTS#: 8466.93.9585

GCC-290096950G Lens, 2" FD, Std  Spot Size: .005"

Machine Models:  Spirit: Hybrid CO2+Fiber Lasers,

GCC-290096960G Lens, 4" FD, Std  Spot Size: .012"

Machine Models:  Spirit: Hybrid CO2+Fiber Lasers,

GCC-290096970G Mirror 2 or #3,

Machine Models:  Spirit: Hybrid CO2+Fiber Lasers,

HTS#: 8466.93.9585

GCC-290096980G Mirror 1,  

Machine Models:  Spirit: Hybrid CO2+Fiber Lasers,

GCC-290097290G Lens, 3" FD, Std  Spot Size: .008"

Machine Models:  Spirit: Hybrid CO2+Fiber Lasers,

GCC 290097910G Holder, Plastic Blade Holder Assembly, with Package (Black)(for i-Craft /AR /Expert II)

GCC 290098460G Holder, Metallic Blade Holder 2.5mm (Black)(with Package), RXII/Jaguar V / AR / EXII / i-Craft / Puma IV

Slide Bracket for simple stand (CS only) Expert 24

290099990G  Touch Key sensor control board to Mainboard Cable Assembly for Puma 4

Pass-Through Door Switch Module (Bypass Magnets, Includes Switch & Warning Light) For Models: Mercury III/Spirit/Spirit LS/GLS/GLS Hybrid/X252EX/X380RX/X500III/MG380Hybrid/S400

Sensor, PCB Board, X-axis Motor, For C180-II/E200 (5-Amp, MCB-5272v2 Red, Replaces 290090970G)

Sensor, PCB Board, X-axis Motor, For C180-II (4-Amp, MCB-5206E, Replaces 290077850G & 238003710G)

Sensor, PCB Board, X-axis Motor, For X252/X380/X500/Venus II-Mercury II, Mercury III (4-Amp, MCB-5206, Replaces 290065220G, 238003430G, 23800225G), Braided Cable, with AAS I/O

* See image of 5206 Main Board with USB & Parallel Port

Machine Model S400

GCC-290102022G

Pulley, X-Axis Tension Idle Pulley Assy. For: S400 (Left Side)

GCC 290102280G Holder, Auto-Adjusted Blade Holder 2.5mm (w/package), i-Craft and i-Craft 2.0 (Grey)

LED, Stack Light & Black Buzzer Alarm Set, For Machines with MainBoard 5272-V3, Models: Spirit LS/GLS/GLS Hybrid/S400

MCB, GCC Main Mother Board Type 5272-v3 +v2 Driver Blue, (Spirit GLS-HYBrid, After Serial #: R55001>) w/USB & Ethernet Port

For GCC Spirit LS Model After Serial #: R98001

Rail, X-axis Linear Guide with Bearing Block, PCB(4A) for 5206E MB (Spirit SGLS/HYB)

Includes: Linear rail and bearing block, Auto Focus Pin, wire-hardness with the track, Mirror #4, bearings along with assisted air hose

* We require confirmation of Machine Serial # to match electronics
** ETD: 1-2 Weeks, call for availability 

290105810G Flat Cable Assembly Puma4-132; Puma4-132LX  (Before S/N:T84000)  190cm

290105820G Flat Cable Assembly for  Puma4-60; Puma4-60LX (BeforeT84000) 118cm

For GCC X252 Model After Serial #: R98001

For GCC MG380HYBRID Model After Serial #: R98001

For GCC X380RX Model After Serial #: R98001

Tool, Belt Tension Check Fixture (Service- XY Small Belt) For GCC Models: Spirit's / Mercury  / X-Series / S400 / C180II

GCC-290107980G Rail, X-axis Linear Guide with Bearing Block Assembly

 (X PCB-4A, for 5206E MB)

Includes: Linear rail and bearing block, Auto Focus Pin, wire-hardness with track, bearings along assisted air hose

Cover For S400

X-axis Dust Prevention

290110090G   PCB Assembly (ESD) for Puma4-60; Puma 4-132  (From T84000)

Tube, Laser Tube, 100w Laser Glass Tube Yongli 100w Y-Type for GCC Laser Model: X380
* w/1-Year Parts Limited Warranty  (Up to 50% Power)

Pallet DIM's: 35-Lbs\\66"Lx17"Wx26"H
EST Freight Cost $475-$575

GCC-290116710G Mirror 4, Carriage Mirror Holder Assy For E200

GCC-290116720G Lens, 1.5" FD-Black, Spot Size: .003", Models: E200

GCC-290117070G Board, Power On/Off Control Board Assembly for E200 

GCC-290117240G Board, 5272v3 Main Board in Common Assembly with 5272v3 firmware for E200

GCC-290117250G Board, Touch Panel Board With E200 Touch Screen Firmware 

E200 Model

MCB, GCC Main Mother Board Type 5272v2 Blue, (Spirit GLS-HYBrid, After Serial #: R55001>) w/USB & Ethernet Port

GCC 2290119360G Torque Hinge for S400 (1 hinge per pack)

GCC-290119370G Board, Raspberry Disk Board Assembly with Raspberry OS for E200

GCC 290119890G Hinge Assembly for S400 (3 hinges per pack)

GCC-290120540G - 5272 Driver Board in Common Assembly with Interlock for Touch Screen  for E200

GCC LaserPro Unveils SmartEYES™ CCD for S400

As one of the leading manufacturers of equipment for the visual communication industry, GCC is thrilled to launch GCC SmartEYES CCD for S400 laser engraving machine.

GCC-290121640G Rail, X-axis Complete Assy. for Mercury III 25~60w 

Old type carriage 

Includes: motor, belts, pulleys
For: 4A Fuse PCB and
ME-25 Before SN: T90095
ME-30 Before SN: U90196
ME-40 Before SN: T90128
ME-40i Before SN: U90260
ME-60ti Before SN: U90204

GCC, 290122470G, Switch, Power Switch ON/OFF w/ Cable Assembly 150mm For: E200

Model: E200

For GCC  Jaguar IV & V, RX, Ultra

Previous Motor #: 29001804G