​ SRM-ENG-ACC, SRM-20 Kit, SRM20, Vectric software SRM-20 (MR-SRM20ACCKIT) | SRM-ENG-ACC, SRM-20 Kit, SRM20, Vectric software SRM-20 (MR-SRM20ACCKIT) | SRM-ENG-ACC, SRM-20 Kit, SRM20, Vectric software SRM-20 (MR-SRM20ACCKIT) | SRM-ENG-ACC, SRM-20 Kit, SRM20, Vectric software SRM-20 (MR-SRM20ACCKIT) | Laser Machines | Engraving | Cutting | Marking
X

Laser Machines

Jorlink sells and offers technical and training support for a wide variety of lasers to meet your companies needs
Each category of laser machines is listed below.  Please contact us for help choosing the right laser for your company.

Lasers By Application:

 Laser Cutting  >   Laser Marking  >   Laser Engraving  >   Hybrid Lasers With Metal and Glass Laser Tubes  >   Production Speed Laser Marking  >   Large Industrial Lasers

SRM-20, Engraving Accessory Kit for SRM-20
SRM-20, Engraving Accessory Kit for SRM-20
6/20/2023
MR-SRM20ACCKIT
send a quote request
Add To Cart Buy It Now Add To Wish List

SRM-20 Kit

Includes:

Software: Vectric software improves SRM-20 engraving capabilities and ease of use.

   Diamond Drag Tooling :For Metal Scribing
Spring-loaded tool enables for scribing on metal, with pressure averaged across the material surface.

   V-Bit Tooling: For Rotary Engraving
Short reach tooling to fit the SRM-20 spindle, used in conjunction with the 1/8” collets.

  Collets: 1/4” and 1/8” collets are included to ensure compatibility of V-Bit tooling and diamond drag tooling.

  Bed Offset Hardware :Threaded offsets raise the surface bed height to allows for full Z-axis travel when using short reach tools.

  Indexing Fixture: Allows for easier material positioning

Centering Vise : Allows for easy loading and unloading of unconventional gift items.

 AS-10 Sheets: Adhesive hold-down sheets help keep material and fixtures in place during operation.

 

 

 

Data Sheet Engraving and Gift Making
 

 

MODEL SRM-20
Cuttable Material Modeling Wax, Chemical Wood, Foam, Acrylic, Poly acetate, ABS, PC board
X, Y, and Z Operation Strokes 8 (X) x 6 (Y) x 2.38 (Z) inches,
203.2 (X) x 152.4 (Y) x 60.5 (Z) mm
Workpiece table size 9.14 (X) x 6.17 (Y) inches,
232.2 (X) x 156.6 (Y) mm
Distance From Collet Tip to Table Maximum, 5.15 in
(130.75mm)
Loadable Workpiece Weight 4.4 lbs (2kg)
X-, Y-, and Z-Axis Drive System Stepping motor
Operating Speed 0.24 – 70.87inch/min,
6 – 1800mm/min
Software Resolution 0.000039 inches/step (RML-1), 0.000039 inches/step (NC code),
0.01 mm/step (RML-1), 0.001mm/step (NC code)
Mechanical Resolution 0.0000393 inches/step,
0.000998594 mm/step
Spindle Motor DC motor Type 380
Spindle Rotation Speed Adjustable 3,000 – 7,000 rpm
Cutting Tool Chuck Collet method
Interface USB
Control Command Sets RML-1, NC code
Power Requirements Machine: DC24V, 2.5A,
Dedicated AC adapter: AC 100-240V ±10%, 50/60Hz
Power Consumption Approx. 50W
Operating Noise During operation: 65 dB (A) or less (when not cutting),
during standby: 45 dB (A) or less
External Dimensions 17.76 (W) x 16.80 (D) x 16.78 (H) inches,
451.0 (W) x 426.6 (D) x 426.2 (H) mm
Weight 43.2 lbs, 19.6 kg
Installation Environment Temperature of 41 to 104 °F (5 to 40°C),
35 to 80% relative humidity (no condensation)
Included Items USB cable, AC adapter, Power cord, Collet (6mm, .236 inches), Collet set screw, Spanners (7,10mm / 0.28, 0.39 inches), Hexagonal wrench (size 2,3 mm / 0.059, 0.12 inches), Positioning pins, Double-sided tape, Start-up page guidance card, Cutting tools not included. Imperial sized collets and cutting tools not included.

 

System Requirements
Operating system (OS) Windows 7/8/8.1 (32-bit/64-bit edition)*
CPU Intel® Core 2 Duo or more (Core i5 or more recommended)
Memory (RAM) 1GB (2GB or more recommended)
Video card and monitor A resolution of 1,280x1,024 or more recommended
Free hard-disk space required
as a working space		 100 megabytes or more recommended
Other requirements Internet connection and web browser,
Internet Explorer version 10 or more recommended

 

 

 

SRM-20 Engraver Accessories

MILLING

Part No. Description Price
EMB-125-2F-016 .016" Ball End Mill $38.99
EMB-125-2F-016L .016" Ball End, Mill Long $38.99
EMB-125-2F-031 .031" Ball End Mill $29.99
EMB-125-2F-031L .031" Ball End Mill Long $38.99
EMB-125-2F-063 .063" Ball End Mill $29.99
EMB-125-2F-063L .063" Ball End Mill Long $43.99
EMB-125-2F-125 .125" Ball End Mill $29.99
EMB-125-2F-125L .125" Ball End Mill Long $43.99
EMB-250-2F-250L .250" Ball End Mill Long $52.99
EMF-125-2F-016 .016" Flat End Mill $29.99
EMF-125-2F-016L .016" Flat End Mill Long $29.99
EMF-125-2F-031 .031" Flat End Mill $29.99
EMF-125-2F-031L .031" Flat End Mill Long $38.99
EMF-125-2F-063 .063" Flat End Mill $29.99
EMF-125-2F-063L .063" Flat End Mill Long $43.99
EMF-125-2F-125 .125" Flat End Mill $29.99
EMF-125-2F-125L .125" Flat End Mill Long $43.99
EMF-250-2F-250L .250in Flat End Mill Long $52.99
SM-20 SRM-20 Spindle Motor $104.99
SS-20 SRM-20 Spindle Unit $259.99
ZC-20-32 3.2mm- 1/8in SRM Collet $64.99
ZC-23-635 Collet, 1/4" for EGX-350, MDX-40/A, SRM-20, DE-3 $35.99

Reviews

SRM-20, Engraving Accessory Kit for SRM-20
SRM-20, Engraving Accessory Kit for SRM-20
Seller: ( 0 ) Jorlink
Feedback: There are currently no ratings.
6/20/2023
MR-SRM20ACCKIT
SRM-ENG-ACC
2 SRM-20
5 lbs
send a quote request
Add To Cart Buy It Now Add To Wish List

SRM-20 Kit

Includes:

Software: Vectric software improves SRM-20 engraving capabilities and ease of use.

   Diamond Drag Tooling :For Metal Scribing
Spring-loaded tool enables for scribing on metal, with pressure averaged across the material surface.

   V-Bit Tooling: For Rotary Engraving
Short reach tooling to fit the SRM-20 spindle, used in conjunction with the 1/8” collets.

  Collets: 1/4” and 1/8” collets are included to ensure compatibility of V-Bit tooling and diamond drag tooling.

  Bed Offset Hardware :Threaded offsets raise the surface bed height to allows for full Z-axis travel when using short reach tools.

  Indexing Fixture: Allows for easier material positioning

Centering Vise : Allows for easy loading and unloading of unconventional gift items.

 AS-10 Sheets: Adhesive hold-down sheets help keep material and fixtures in place during operation.

 

 

 

Data Sheet Engraving and Gift Making
 

 

MODEL SRM-20
Cuttable Material Modeling Wax, Chemical Wood, Foam, Acrylic, Poly acetate, ABS, PC board
X, Y, and Z Operation Strokes 8 (X) x 6 (Y) x 2.38 (Z) inches,
203.2 (X) x 152.4 (Y) x 60.5 (Z) mm
Workpiece table size 9.14 (X) x 6.17 (Y) inches,
232.2 (X) x 156.6 (Y) mm
Distance From Collet Tip to Table Maximum, 5.15 in
(130.75mm)
Loadable Workpiece Weight 4.4 lbs (2kg)
X-, Y-, and Z-Axis Drive System Stepping motor
Operating Speed 0.24 – 70.87inch/min,
6 – 1800mm/min
Software Resolution 0.000039 inches/step (RML-1), 0.000039 inches/step (NC code),
0.01 mm/step (RML-1), 0.001mm/step (NC code)
Mechanical Resolution 0.0000393 inches/step,
0.000998594 mm/step
Spindle Motor DC motor Type 380
Spindle Rotation Speed Adjustable 3,000 – 7,000 rpm
Cutting Tool Chuck Collet method
Interface USB
Control Command Sets RML-1, NC code
Power Requirements Machine: DC24V, 2.5A,
Dedicated AC adapter: AC 100-240V ±10%, 50/60Hz
Power Consumption Approx. 50W
Operating Noise During operation: 65 dB (A) or less (when not cutting),
during standby: 45 dB (A) or less
External Dimensions 17.76 (W) x 16.80 (D) x 16.78 (H) inches,
451.0 (W) x 426.6 (D) x 426.2 (H) mm
Weight 43.2 lbs, 19.6 kg
Installation Environment Temperature of 41 to 104 °F (5 to 40°C),
35 to 80% relative humidity (no condensation)
Included Items USB cable, AC adapter, Power cord, Collet (6mm, .236 inches), Collet set screw, Spanners (7,10mm / 0.28, 0.39 inches), Hexagonal wrench (size 2,3 mm / 0.059, 0.12 inches), Positioning pins, Double-sided tape, Start-up page guidance card, Cutting tools not included. Imperial sized collets and cutting tools not included.

 

System Requirements
Operating system (OS) Windows 7/8/8.1 (32-bit/64-bit edition)*
CPU Intel® Core 2 Duo or more (Core i5 or more recommended)
Memory (RAM) 1GB (2GB or more recommended)
Video card and monitor A resolution of 1,280x1,024 or more recommended
Free hard-disk space required
as a working space		 100 megabytes or more recommended
Other requirements Internet connection and web browser,
Internet Explorer version 10 or more recommended

 

 

 

SRM-20 Engraver Accessories

MILLING

Part No. Description Price
EMB-125-2F-016 .016" Ball End Mill $38.99
EMB-125-2F-016L .016" Ball End, Mill Long $38.99
EMB-125-2F-031 .031" Ball End Mill $29.99
EMB-125-2F-031L .031" Ball End Mill Long $38.99
EMB-125-2F-063 .063" Ball End Mill $29.99
EMB-125-2F-063L .063" Ball End Mill Long $43.99
EMB-125-2F-125 .125" Ball End Mill $29.99
EMB-125-2F-125L .125" Ball End Mill Long $43.99
EMB-250-2F-250L .250" Ball End Mill Long $52.99
EMF-125-2F-016 .016" Flat End Mill $29.99
EMF-125-2F-016L .016" Flat End Mill Long $29.99
EMF-125-2F-031 .031" Flat End Mill $29.99
EMF-125-2F-031L .031" Flat End Mill Long $38.99
EMF-125-2F-063 .063" Flat End Mill $29.99
EMF-125-2F-063L .063" Flat End Mill Long $43.99
EMF-125-2F-125 .125" Flat End Mill $29.99
EMF-125-2F-125L .125" Flat End Mill Long $43.99
EMF-250-2F-250L .250in Flat End Mill Long $52.99
SM-20 SRM-20 Spindle Motor $104.99
SS-20 SRM-20 Spindle Unit $259.99
ZC-20-32 3.2mm- 1/8in SRM Collet $64.99
ZC-23-635 Collet, 1/4" for EGX-350, MDX-40/A, SRM-20, DE-3 $35.99
SRM-20, Engraving Accessory Kit for SRM-20
SRM-20, Engraving Accessory Kit for SRM-20
Seller: ( 0 ) Jorlink
Feedback: There are currently no ratings.
6/20/2023
MR-SRM20ACCKIT
SRM-ENG-ACC
2 SRM-20
5 lbs
send a quote request
Add To Cart Buy It Now Add To Wish List

SRM-20 Kit

Includes:

Software: Vectric software improves SRM-20 engraving capabilities and ease of use.

   Diamond Drag Tooling :For Metal Scribing
Spring-loaded tool enables for scribing on metal, with pressure averaged across the material surface.

   V-Bit Tooling: For Rotary Engraving
Short reach tooling to fit the SRM-20 spindle, used in conjunction with the 1/8” collets.

  Collets: 1/4” and 1/8” collets are included to ensure compatibility of V-Bit tooling and diamond drag tooling.

  Bed Offset Hardware :Threaded offsets raise the surface bed height to allows for full Z-axis travel when using short reach tools.

  Indexing Fixture: Allows for easier material positioning

Centering Vise : Allows for easy loading and unloading of unconventional gift items.

 AS-10 Sheets: Adhesive hold-down sheets help keep material and fixtures in place during operation.

 

 

 

Data Sheet Engraving and Gift Making
 

 

MODEL SRM-20
Cuttable Material Modeling Wax, Chemical Wood, Foam, Acrylic, Poly acetate, ABS, PC board
X, Y, and Z Operation Strokes 8 (X) x 6 (Y) x 2.38 (Z) inches,
203.2 (X) x 152.4 (Y) x 60.5 (Z) mm
Workpiece table size 9.14 (X) x 6.17 (Y) inches,
232.2 (X) x 156.6 (Y) mm
Distance From Collet Tip to Table Maximum, 5.15 in
(130.75mm)
Loadable Workpiece Weight 4.4 lbs (2kg)
X-, Y-, and Z-Axis Drive System Stepping motor
Operating Speed 0.24 – 70.87inch/min,
6 – 1800mm/min
Software Resolution 0.000039 inches/step (RML-1), 0.000039 inches/step (NC code),
0.01 mm/step (RML-1), 0.001mm/step (NC code)
Mechanical Resolution 0.0000393 inches/step,
0.000998594 mm/step
Spindle Motor DC motor Type 380
Spindle Rotation Speed Adjustable 3,000 – 7,000 rpm
Cutting Tool Chuck Collet method
Interface USB
Control Command Sets RML-1, NC code
Power Requirements Machine: DC24V, 2.5A,
Dedicated AC adapter: AC 100-240V ±10%, 50/60Hz
Power Consumption Approx. 50W
Operating Noise During operation: 65 dB (A) or less (when not cutting),
during standby: 45 dB (A) or less
External Dimensions 17.76 (W) x 16.80 (D) x 16.78 (H) inches,
451.0 (W) x 426.6 (D) x 426.2 (H) mm
Weight 43.2 lbs, 19.6 kg
Installation Environment Temperature of 41 to 104 °F (5 to 40°C),
35 to 80% relative humidity (no condensation)
Included Items USB cable, AC adapter, Power cord, Collet (6mm, .236 inches), Collet set screw, Spanners (7,10mm / 0.28, 0.39 inches), Hexagonal wrench (size 2,3 mm / 0.059, 0.12 inches), Positioning pins, Double-sided tape, Start-up page guidance card, Cutting tools not included. Imperial sized collets and cutting tools not included.

 

System Requirements
Operating system (OS) Windows 7/8/8.1 (32-bit/64-bit edition)*
CPU Intel® Core 2 Duo or more (Core i5 or more recommended)
Memory (RAM) 1GB (2GB or more recommended)
Video card and monitor A resolution of 1,280x1,024 or more recommended
Free hard-disk space required
as a working space		 100 megabytes or more recommended
Other requirements Internet connection and web browser,
Internet Explorer version 10 or more recommended

 

 

 

SRM-20 Engraver Accessories

MILLING

Part No. Description Price
EMB-125-2F-016 .016" Ball End Mill $38.99
EMB-125-2F-016L .016" Ball End, Mill Long $38.99
EMB-125-2F-031 .031" Ball End Mill $29.99
EMB-125-2F-031L .031" Ball End Mill Long $38.99
EMB-125-2F-063 .063" Ball End Mill $29.99
EMB-125-2F-063L .063" Ball End Mill Long $43.99
EMB-125-2F-125 .125" Ball End Mill $29.99
EMB-125-2F-125L .125" Ball End Mill Long $43.99
EMB-250-2F-250L .250" Ball End Mill Long $52.99
EMF-125-2F-016 .016" Flat End Mill $29.99
EMF-125-2F-016L .016" Flat End Mill Long $29.99
EMF-125-2F-031 .031" Flat End Mill $29.99
EMF-125-2F-031L .031" Flat End Mill Long $38.99
EMF-125-2F-063 .063" Flat End Mill $29.99
EMF-125-2F-063L .063" Flat End Mill Long $43.99
EMF-125-2F-125 .125" Flat End Mill $29.99
EMF-125-2F-125L .125" Flat End Mill Long $43.99
EMF-250-2F-250L .250in Flat End Mill Long $52.99
SM-20 SRM-20 Spindle Motor $104.99
SS-20 SRM-20 Spindle Unit $259.99
ZC-20-32 3.2mm- 1/8in SRM Collet $64.99
ZC-23-635 Collet, 1/4" for EGX-350, MDX-40/A, SRM-20, DE-3 $35.99
SRM-20, Engraving Accessory Kit for SRM-20
SRM-20, Engraving Accessory Kit for SRM-20
Seller: ( 0 ) Jorlink
Feedback: There are currently no ratings.
6/20/2023
MR-SRM20ACCKIT
SRM-ENG-ACC
2 SRM-20
5 lbs
send a quote request
Add To Cart Buy It Now Add To Wish List

SRM-20 Kit

Includes:

Software: Vectric software improves SRM-20 engraving capabilities and ease of use.

   Diamond Drag Tooling :For Metal Scribing
Spring-loaded tool enables for scribing on metal, with pressure averaged across the material surface.

   V-Bit Tooling: For Rotary Engraving
Short reach tooling to fit the SRM-20 spindle, used in conjunction with the 1/8” collets.

  Collets: 1/4” and 1/8” collets are included to ensure compatibility of V-Bit tooling and diamond drag tooling.

  Bed Offset Hardware :Threaded offsets raise the surface bed height to allows for full Z-axis travel when using short reach tools.

  Indexing Fixture: Allows for easier material positioning

Centering Vise : Allows for easy loading and unloading of unconventional gift items.

 AS-10 Sheets: Adhesive hold-down sheets help keep material and fixtures in place during operation.

 

 

 

Data Sheet Engraving and Gift Making
 

 

MODEL SRM-20
Cuttable Material Modeling Wax, Chemical Wood, Foam, Acrylic, Poly acetate, ABS, PC board
X, Y, and Z Operation Strokes 8 (X) x 6 (Y) x 2.38 (Z) inches,
203.2 (X) x 152.4 (Y) x 60.5 (Z) mm
Workpiece table size 9.14 (X) x 6.17 (Y) inches,
232.2 (X) x 156.6 (Y) mm
Distance From Collet Tip to Table Maximum, 5.15 in
(130.75mm)
Loadable Workpiece Weight 4.4 lbs (2kg)
X-, Y-, and Z-Axis Drive System Stepping motor
Operating Speed 0.24 – 70.87inch/min,
6 – 1800mm/min
Software Resolution 0.000039 inches/step (RML-1), 0.000039 inches/step (NC code),
0.01 mm/step (RML-1), 0.001mm/step (NC code)
Mechanical Resolution 0.0000393 inches/step,
0.000998594 mm/step
Spindle Motor DC motor Type 380
Spindle Rotation Speed Adjustable 3,000 – 7,000 rpm
Cutting Tool Chuck Collet method
Interface USB
Control Command Sets RML-1, NC code
Power Requirements Machine: DC24V, 2.5A,
Dedicated AC adapter: AC 100-240V ±10%, 50/60Hz
Power Consumption Approx. 50W
Operating Noise During operation: 65 dB (A) or less (when not cutting),
during standby: 45 dB (A) or less
External Dimensions 17.76 (W) x 16.80 (D) x 16.78 (H) inches,
451.0 (W) x 426.6 (D) x 426.2 (H) mm
Weight 43.2 lbs, 19.6 kg
Installation Environment Temperature of 41 to 104 °F (5 to 40°C),
35 to 80% relative humidity (no condensation)
Included Items USB cable, AC adapter, Power cord, Collet (6mm, .236 inches), Collet set screw, Spanners (7,10mm / 0.28, 0.39 inches), Hexagonal wrench (size 2,3 mm / 0.059, 0.12 inches), Positioning pins, Double-sided tape, Start-up page guidance card, Cutting tools not included. Imperial sized collets and cutting tools not included.

 

System Requirements
Operating system (OS) Windows 7/8/8.1 (32-bit/64-bit edition)*
CPU Intel® Core 2 Duo or more (Core i5 or more recommended)
Memory (RAM) 1GB (2GB or more recommended)
Video card and monitor A resolution of 1,280x1,024 or more recommended
Free hard-disk space required
as a working space		 100 megabytes or more recommended
Other requirements Internet connection and web browser,
Internet Explorer version 10 or more recommended

 

 

 

SRM-20 Engraver Accessories

MILLING

Part No. Description Price
EMB-125-2F-016 .016" Ball End Mill $38.99
EMB-125-2F-016L .016" Ball End, Mill Long $38.99
EMB-125-2F-031 .031" Ball End Mill $29.99
EMB-125-2F-031L .031" Ball End Mill Long $38.99
EMB-125-2F-063 .063" Ball End Mill $29.99
EMB-125-2F-063L .063" Ball End Mill Long $43.99
EMB-125-2F-125 .125" Ball End Mill $29.99
EMB-125-2F-125L .125" Ball End Mill Long $43.99
EMB-250-2F-250L .250" Ball End Mill Long $52.99
EMF-125-2F-016 .016" Flat End Mill $29.99
EMF-125-2F-016L .016" Flat End Mill Long $29.99
EMF-125-2F-031 .031" Flat End Mill $29.99
EMF-125-2F-031L .031" Flat End Mill Long $38.99
EMF-125-2F-063 .063" Flat End Mill $29.99
EMF-125-2F-063L .063" Flat End Mill Long $43.99
EMF-125-2F-125 .125" Flat End Mill $29.99
EMF-125-2F-125L .125" Flat End Mill Long $43.99
EMF-250-2F-250L .250in Flat End Mill Long $52.99
SM-20 SRM-20 Spindle Motor $104.99
SS-20 SRM-20 Spindle Unit $259.99
ZC-20-32 3.2mm- 1/8in SRM Collet $64.99
ZC-23-635 Collet, 1/4" for EGX-350, MDX-40/A, SRM-20, DE-3 $35.99
SRM-20, Engraving Accessory Kit for SRM-20
SRM-20, Engraving Accessory Kit for SRM-20
6/20/2023
MR-SRM20ACCKIT
SRM-ENG-ACC
2 SRM-20
5 lbs
$695.00
Add To Cart Buy It Now Add To Wish List

SRM-20 Kit

Includes:

Software: Vectric software improves SRM-20 engraving capabilities and ease of use.

   Diamond Drag Tooling :For Metal Scribing
Spring-loaded tool enables for scribing on metal, with pressure averaged across the material surface.

   V-Bit Tooling: For Rotary Engraving
Short reach tooling to fit the SRM-20 spindle, used in conjunction with the 1/8” collets.

  Collets: 1/4” and 1/8” collets are included to ensure compatibility of V-Bit tooling and diamond drag tooling.

  Bed Offset Hardware :Threaded offsets raise the surface bed height to allows for full Z-axis travel when using short reach tools.

  Indexing Fixture: Allows for easier material positioning

Centering Vise : Allows for easy loading and unloading of unconventional gift items.

 AS-10 Sheets: Adhesive hold-down sheets help keep material and fixtures in place during operation.

 

 

 

Data Sheet Engraving and Gift Making
 

 

MODEL SRM-20
Cuttable Material Modeling Wax, Chemical Wood, Foam, Acrylic, Poly acetate, ABS, PC board
X, Y, and Z Operation Strokes 8 (X) x 6 (Y) x 2.38 (Z) inches,
203.2 (X) x 152.4 (Y) x 60.5 (Z) mm
Workpiece table size 9.14 (X) x 6.17 (Y) inches,
232.2 (X) x 156.6 (Y) mm
Distance From Collet Tip to Table Maximum, 5.15 in
(130.75mm)
Loadable Workpiece Weight 4.4 lbs (2kg)
X-, Y-, and Z-Axis Drive System Stepping motor
Operating Speed 0.24 – 70.87inch/min,
6 – 1800mm/min
Software Resolution 0.000039 inches/step (RML-1), 0.000039 inches/step (NC code),
0.01 mm/step (RML-1), 0.001mm/step (NC code)
Mechanical Resolution 0.0000393 inches/step,
0.000998594 mm/step
Spindle Motor DC motor Type 380
Spindle Rotation Speed Adjustable 3,000 – 7,000 rpm
Cutting Tool Chuck Collet method
Interface USB
Control Command Sets RML-1, NC code
Power Requirements Machine: DC24V, 2.5A,
Dedicated AC adapter: AC 100-240V ±10%, 50/60Hz
Power Consumption Approx. 50W
Operating Noise During operation: 65 dB (A) or less (when not cutting),
during standby: 45 dB (A) or less
External Dimensions 17.76 (W) x 16.80 (D) x 16.78 (H) inches,
451.0 (W) x 426.6 (D) x 426.2 (H) mm
Weight 43.2 lbs, 19.6 kg
Installation Environment Temperature of 41 to 104 °F (5 to 40°C),
35 to 80% relative humidity (no condensation)
Included Items USB cable, AC adapter, Power cord, Collet (6mm, .236 inches), Collet set screw, Spanners (7,10mm / 0.28, 0.39 inches), Hexagonal wrench (size 2,3 mm / 0.059, 0.12 inches), Positioning pins, Double-sided tape, Start-up page guidance card, Cutting tools not included. Imperial sized collets and cutting tools not included.

 

System Requirements
Operating system (OS) Windows 7/8/8.1 (32-bit/64-bit edition)*
CPU Intel® Core 2 Duo or more (Core i5 or more recommended)
Memory (RAM) 1GB (2GB or more recommended)
Video card and monitor A resolution of 1,280x1,024 or more recommended
Free hard-disk space required
as a working space		 100 megabytes or more recommended
Other requirements Internet connection and web browser,
Internet Explorer version 10 or more recommended

 

 

 

SRM-20 Engraver Accessories

MILLING

Part No. Description Price
EMB-125-2F-016 .016" Ball End Mill $38.99
EMB-125-2F-016L .016" Ball End, Mill Long $38.99
EMB-125-2F-031 .031" Ball End Mill $29.99
EMB-125-2F-031L .031" Ball End Mill Long $38.99
EMB-125-2F-063 .063" Ball End Mill $29.99
EMB-125-2F-063L .063" Ball End Mill Long $43.99
EMB-125-2F-125 .125" Ball End Mill $29.99
EMB-125-2F-125L .125" Ball End Mill Long $43.99
EMB-250-2F-250L .250" Ball End Mill Long $52.99
EMF-125-2F-016 .016" Flat End Mill $29.99
EMF-125-2F-016L .016" Flat End Mill Long $29.99
EMF-125-2F-031 .031" Flat End Mill $29.99
EMF-125-2F-031L .031" Flat End Mill Long $38.99
EMF-125-2F-063 .063" Flat End Mill $29.99
EMF-125-2F-063L .063" Flat End Mill Long $43.99
EMF-125-2F-125 .125" Flat End Mill $29.99
EMF-125-2F-125L .125" Flat End Mill Long $43.99
EMF-250-2F-250L .250in Flat End Mill Long $52.99
SM-20 SRM-20 Spindle Motor $104.99
SS-20 SRM-20 Spindle Unit $259.99
ZC-20-32 3.2mm- 1/8in SRM Collet $64.99
ZC-23-635 Collet, 1/4" for EGX-350, MDX-40/A, SRM-20, DE-3 $35.99

Eagle Lasers

SRM-20, Engraving Accessory Kit for SRM-20
SRM-20, Engraving Accessory Kit for SRM-20
6/20/2023
MR-SRM20ACCKIT
send a quote request
Add To Cart Buy It Now Add To Wish List

SRM-20 Kit

Includes:

Software: Vectric software improves SRM-20 engraving capabilities and ease of use.

   Diamond Drag Tooling :For Metal Scribing
Spring-loaded tool enables for scribing on metal, with pressure averaged across the material surface.

   V-Bit Tooling: For Rotary Engraving
Short reach tooling to fit the SRM-20 spindle, used in conjunction with the 1/8” collets.

  Collets: 1/4” and 1/8” collets are included to ensure compatibility of V-Bit tooling and diamond drag tooling.

  Bed Offset Hardware :Threaded offsets raise the surface bed height to allows for full Z-axis travel when using short reach tools.

  Indexing Fixture: Allows for easier material positioning

Centering Vise : Allows for easy loading and unloading of unconventional gift items.

 AS-10 Sheets: Adhesive hold-down sheets help keep material and fixtures in place during operation.

 

 

 

Data Sheet Engraving and Gift Making
 

 

MODEL SRM-20
Cuttable Material Modeling Wax, Chemical Wood, Foam, Acrylic, Poly acetate, ABS, PC board
X, Y, and Z Operation Strokes 8 (X) x 6 (Y) x 2.38 (Z) inches,
203.2 (X) x 152.4 (Y) x 60.5 (Z) mm
Workpiece table size 9.14 (X) x 6.17 (Y) inches,
232.2 (X) x 156.6 (Y) mm
Distance From Collet Tip to Table Maximum, 5.15 in
(130.75mm)
Loadable Workpiece Weight 4.4 lbs (2kg)
X-, Y-, and Z-Axis Drive System Stepping motor
Operating Speed 0.24 – 70.87inch/min,
6 – 1800mm/min
Software Resolution 0.000039 inches/step (RML-1), 0.000039 inches/step (NC code),
0.01 mm/step (RML-1), 0.001mm/step (NC code)
Mechanical Resolution 0.0000393 inches/step,
0.000998594 mm/step
Spindle Motor DC motor Type 380
Spindle Rotation Speed Adjustable 3,000 – 7,000 rpm
Cutting Tool Chuck Collet method
Interface USB
Control Command Sets RML-1, NC code
Power Requirements Machine: DC24V, 2.5A,
Dedicated AC adapter: AC 100-240V ±10%, 50/60Hz
Power Consumption Approx. 50W
Operating Noise During operation: 65 dB (A) or less (when not cutting),
during standby: 45 dB (A) or less
External Dimensions 17.76 (W) x 16.80 (D) x 16.78 (H) inches,
451.0 (W) x 426.6 (D) x 426.2 (H) mm
Weight 43.2 lbs, 19.6 kg
Installation Environment Temperature of 41 to 104 °F (5 to 40°C),
35 to 80% relative humidity (no condensation)
Included Items USB cable, AC adapter, Power cord, Collet (6mm, .236 inches), Collet set screw, Spanners (7,10mm / 0.28, 0.39 inches), Hexagonal wrench (size 2,3 mm / 0.059, 0.12 inches), Positioning pins, Double-sided tape, Start-up page guidance card, Cutting tools not included. Imperial sized collets and cutting tools not included.

 

System Requirements
Operating system (OS) Windows 7/8/8.1 (32-bit/64-bit edition)*
CPU Intel® Core 2 Duo or more (Core i5 or more recommended)
Memory (RAM) 1GB (2GB or more recommended)
Video card and monitor A resolution of 1,280x1,024 or more recommended
Free hard-disk space required
as a working space		 100 megabytes or more recommended
Other requirements Internet connection and web browser,
Internet Explorer version 10 or more recommended

 

 

 

SRM-20 Engraver Accessories

MILLING

Part No. Description Price
EMB-125-2F-016 .016" Ball End Mill $38.99
EMB-125-2F-016L .016" Ball End, Mill Long $38.99
EMB-125-2F-031 .031" Ball End Mill $29.99
EMB-125-2F-031L .031" Ball End Mill Long $38.99
EMB-125-2F-063 .063" Ball End Mill $29.99
EMB-125-2F-063L .063" Ball End Mill Long $43.99
EMB-125-2F-125 .125" Ball End Mill $29.99
EMB-125-2F-125L .125" Ball End Mill Long $43.99
EMB-250-2F-250L .250" Ball End Mill Long $52.99
EMF-125-2F-016 .016" Flat End Mill $29.99
EMF-125-2F-016L .016" Flat End Mill Long $29.99
EMF-125-2F-031 .031" Flat End Mill $29.99
EMF-125-2F-031L .031" Flat End Mill Long $38.99
EMF-125-2F-063 .063" Flat End Mill $29.99
EMF-125-2F-063L .063" Flat End Mill Long $43.99
EMF-125-2F-125 .125" Flat End Mill $29.99
EMF-125-2F-125L .125" Flat End Mill Long $43.99
EMF-250-2F-250L .250in Flat End Mill Long $52.99
SM-20 SRM-20 Spindle Motor $104.99
SS-20 SRM-20 Spindle Unit $259.99
ZC-20-32 3.2mm- 1/8in SRM Collet $64.99
ZC-23-635 Collet, 1/4" for EGX-350, MDX-40/A, SRM-20, DE-3 $35.99

Reviews

Jorlink USA, Inc,
3714 Alliance Dr., Suite 100
Greensboro, NC 27407
TEL: (336) 288-1613
eMail: sales@jorlink.com
M-F 9am-5pm EST 
Facebook Linkedin twitter Instagram YouTube