FOR SUPPORT:  HELPDESK TICKET FORM

Wrench, EGX-350 Spanner Wrench Tool (2 sided)

* This Tool Spanner (Product #21935111) is used to install and tighten collets within the spindle. This spanner is intended for use with the EGX-350 and EGX-400/600 engravers.

Wrench, Tool Spanner 6-14 CS-20/EGX-30/EGX30a/EGX20

* This Tool Spanner (Product #21935115) is used to install and tighten collets within the spindle. This spanner is intended for use with the EGX-20 engraver.

Pre filter cyclone for dust collectors

Acts as a dust separator and pre filter cyclone that pushes debris and dust to the bottom container

Features:

• Easily Integrates Into Any Dust Collection System
• 5 Gallon Removable Debris Capture Bucket
• Highly Durable Molded Resin Design
• Scientifically Tested and Proven to Separate Dust
  • A 3M/Georgia Tech Study
• Up To 97% Cyclonic Separation Rate of Particles Down to .3 Microns
• 95% Effective at Precious Metal Reclamation
• Inlet/Outlet Ports – OD: 4″- ID: 3.75″

MultiMat, SEKLEMA Engraving Table Hold Down MAT, 12"x24" Double Sided

Vacuum, Chip Extraction Sys. UltraQuiet, 1/2hp w/accumulator

Key Features

• This chip removal system is quiet and efficient to use in any shop.
• The vacuum not only keeps your works space clear of debris, but it also filters 99.99% of dust out of the air!
• The systems are also self-contained so it can be used to reclaim precious metals.
• The vacuum hose supplied slips onto the vacuum connection on top of the unit and the other end connects to the collection device desired.
• The ideal location for the US-CHIPSYS-C is under the bench where the user works.

US-CHIPSYS-C Specifications

• Usage: Single station use for collecting dust at 1.5” diameter workstation
• Speeds: Single Speed
• Size: 14.Lx10.Wx12.H
• Power Requirement: 115 VAC 5A
• Overload Protection: Resettable circuit breaker included.
• Sound rating: 53db on High
• Dust Collection: Collects 99.99% of all dust (filter rated at 95% @ 1 micron)
• Motor Rating: High-Performance ½ Horsepower Motor

MultiMat-Seklema-White, 12"x12" (30.5cm) DOUBLE Sided, Engraving Table Hold Down Mat

SRM-20 Kit

Includes:

Vectric software SRM-20 , Diamond Drag , Tooling , V-Bit Tooling , 1/4” and 1/8” Collets , Bed Offset Hardware , Indexing Fixture , Centering Vise , AS-10 Sheets

Motor, Stepper, 1.88 Amps, 6vdc, 1.8d, 1612-2412-WB2818  X-Y Axis (Same as R6009014 & R4610017, PH2610-01)