FOR SUPPORT:  HELPDESK TICKET FORM

Collet, 1/4"(6.35mm) for: Roland DGA EGX350/EGX400/EGX600, MDX-40, SRM-10, JXW-10
This 6.35mm Collet (Product #ZC-23-635) is for use with bottom loading end mills. It is compatible with the following Roland DGA devices: JWX-10, EGX-300/400/600, MDX-40, and SRM-10.

Collet, 1/8", ZC-23-3 Solid Split Bottom Load Collet 3mm (.125") For: DE-3, EGX300/EGX350/EGX400/EGX600

This 3mm Collet (Product #ZC-23-3) is for use with bottom loading end mills. It is compatible with the following Roland devices: JWX-10, EGX-300/400/600, MDX-40, and SRM-10.

Collet, Split, Top Load Collet 3.175mm PNC2300A (1,8") For: EGX300/ EGX350/EGX360

This 3.175mm Collet (Product #ZC-23-3175) is for use with bottom loading end mills. It is compatible with the following Roland devices: JWX-10, EGX-300/400/600, MDX-40, and SRM-10.

Collet, 11/64", Solid Bottom Load Collet 4.36 MM (.171") 

For: DE3/EGX350/EGX400/EGX600, Half Round Cutters

This Collet Holder (Product #1000003391, alternative to discontinued # 21655242) is used with standard cutting tools in the EGX-350. It should not be used with pass-through collets. This holder prevents the cutting tool from dropping through the spindle and damaging the engraving material.

Collet, 11/64", ZC-E436 Solid Bottom Load Collet (.171") For EGX300\EGX350\PNC-2300A\EGX400\600, Burnishing - Diamond Guide

This Bottom Loading Burnished Guide (Product #ZC-E436) is intended for use with the Roland EGX-Series engravers. The guide is designed for diamond drag applications and must be used with diamond engraving burnishing tools.

Collet, 6mm for EGX-300/EGX350/EGX400/EGX600600, JWX-10, MDX-40

This 6mm Collet (Product #ZC-23-6) is for use with bottom loading end mills. It is compatible with the following Roland devices: JWX-10, EGX-300/400/600, MDX-40, and SRM-10.

Compressor for Air Assist-High Volume, 220Vac,3.18 CFM

A specially designed Air Compressor for laser engravers, by using an oil-less diaphragm, you help eliminate the harmful and damaging side effects of moisture on the laser optics. Also, provides the optimal air pressure your laser needs to blow away vaporized particles and helps prevents overheating. A must to keep lenses and mirrors clean to promote longer laser life. Recommended for production enviroments where laser will be operating eight (8) hours or more.

SPECS:
Voltage: 220vac
Power Consumption: 270 watts
Hz:50/60
Air capacity:86~95 L/min
Outlet pressure is 7~10 kg/cm2 (100~142psi)