Roland CAMM-1 Parts

20600034G  Y axis carriage belt for  Puma II 60 /  Puma III 60   (2GT-L1548-W9)

20600036  Y axis carriage Belt for Puma 30  (2GT-T520-W9)

20600037 Y axis carriage belt for Puma II 30  (2GT-T515-W9)

20600038G  Y axis carriage Belt  for Puma II-132 / Puma III-132-  2GT-T1527-W9

20900376  Flat Cable for Lynx 30 60 / Puma I 30 60  8 pin

21500021G  Flash ROM (DIP) (A290021T-70F) for Puma

23400024G Control Panel Sticker for Puma 3

234000430G  Control Panel Sticker for Puma 4

26100003 GCC- Voltage Regulatory  for Lynx 30 60 and Puma I 30-60- Puma II 30)

29000864  GCC -Mainboard for Lynx 60/30 and Puma I

29000866G-Pen Force PCB Assembly for Lynx and Puma I

29000869 GCC-Carriage PCB  for Lynx 60 -132  and Puma I -60

29000871G - Control panel PCB Assembly for Puma I & II

29002289-Main Board for Puma II 30 

29002613G Carriage, Tool Carriage Assembly w/o PCB, Puma/Bengal/Expert Pro (BK02040), for Puma I and II

29003340- Carriage PCB Assembly for Puma 30

For: GCC Puma III

29004692G- Control panel Assembly for Puma III

29005210G  Carrier guide roller  Assembly For Puma I-III  (DU type) 

29005344G -GCC  Watch dog board Assembly for Puma III

29005383G- GCC 2 in 1 Cutter mainboard with Puma II firmware (for Service)

290070600G - 2 in 1 Cutter mainboard with Puma II (PLUS) firmware 

290077800G -DC Motor Driver Board Assembly with L6203, for Puma IV

For GCC Vinyl Cutter Puma III-60 (24" Model)

For GCC Vinyl Cutter Puma III-60 (24" Model)

290094450G- Flat Cable Assembly for Puma 60  (104cm)

290094890G - MainBoard for Puma IV with Puma IV 132 LX Firmware

290094900G MainBoard for  Puma IV 60 LX   with Puma IV 60 LX Firmware

290095350G   MainBoard for Puma IV 132 with Puma IV 132 Firmware

290095360G  MainBoard for  Puma IV 60  with Puma IV 60 Firmware

290095480G  Carriage assembly without PCB for Puma (Before S/N: T84000)

290095481G Carriage assembly without PCB for Puma IV 60LX,PumaIV 132 LX  (From S/N: T84000) 

290095660G  Carriage Assembly without PCB for Puma IV-60; Puma IV-132 (Before S/N:T84000)

290095661G  Carriage Assembly without PCB for Puma IV 60, Puma iv 132  (From S/N:T84000)

Control Panel Assembly for Puma IV

290096100G  Flat Cable Assembly for 132 Puma model  (181cm)

290096730G -AASII Carriage board assembly ADC /firmware forPuma IV-60LX; Puma IV-132LX  (T84000))

290096770G  Carriage PCB Assembly for Puma IV -60; Puma IV-132 (Before T84000)

290096840G  X-Axis Motor Assembly for Puma4-132; Puma4-132LX

290099990G  Touch Key sensor control board to Mainboard Cable Assembly for Puma 4

290105810G Flat Cable Assembly Puma4-132; Puma4-132LX  (Before S/N:T84000)  190cm

290105820G Flat Cable Assembly for  Puma4-60; Puma4-60LX (BeforeT84000) 118cm

290110090G   PCB Assembly (ESD) for Puma4-60; Puma 4-132  (From T84000)

49000010  Y axis belt tenion gauge for Puma

AAASII Carriage Board Assembly for Expert 24LX  / Expert II 24LX  / Puma III

245000980G ~ Adapter Power Supply 40W 24V/1.67A (GM50-240167-F) 

AR-24

The best choice in a beginner cutting plotter.

With the possession of a posh style, AR-24 performs perfectly in cutting with its optimized cutting speed and force and lead to a stunning cutting quality, yet it is priced at a startup level and is worthy of return on investment.

Optional Stand part # 290090440G

AR-24 Including Stand

The best choice in a beginner cutting plotter.

With the possession of a posh style, AR-24 performs perfectly in cutting with its optimized cutting speed and force and lead to a stunning cutting quality, yet it is priced at a startup level and is worthy of return on investment.

For detailed information please visit: GCC World

20600035G  Connected belt for Y axis for Puma  (2GT-T40-W9)

For Puma  (2GT-L240-W10), Puma II, III, IV/BI/EP

Belt, Y-axis belt (S2M-W9-T774) Expert-24

GCC 20600066  Y axis carriage belt   Puma 60  (2GT-T779-W9)   

Roland, Blade Holder, Adjustable Tip, Alloy, Blue

GCC 265019700G Blade, 45 DEGREE, Red Blade 2.5mm diameter 1pc/pk (w/package), for RXII & J5 series  (This blade is for black blade holder 2.5 it will not work for the gold holder)

GCC Video:  Use of cutting blades (By Color)

GCC 265017560G Blade, 50 DEGREE/ 0.175mm blade offset/ 2.5mm diameter (1pc) Black Cap Blade.

For cutting small text and fine detail. Sharp blade with smallest offset

Model: i-Craft/AR-24/ EXII/Puma IV/Jaguar V/RXII

GCC Video:  Use of cutting blades (By Color)

Blade, 60 DEGREE, Blue Cap Blade / 0.25 mm blade offset / 2.5 mm diameter (1pc)

For cutting thin sandblast mask and stencil with friction feed or sprocket feed machine 

Model: i-Craft/AR-24/ EXII/Puma IV/Jaguar V/RXII

GCC Video:  Use of cutting blades (By Color)

GCC 265017540G Blade, 60 DEGREE, Green Blade 2.5mm diameter  (1pc)

Model: i-Craft / AR-24 / EXII / Puma IV / Jaguar V / RXII

GCC Video:  Use of cutting blades (By Color)

Blades, GCC, 1 Pcs, 25 Deg., 2.5mm Diam., Yellow Cap, Std Force for Black Plate Holder

App\Models: Cutting Thin Materials or Window Ting \ AR-24/ i-Craft/EXII/Jaguar V/Puma IV

GCC Video:  Use of cutting blades (By Color)

GCC 265012020G Blade, 60 DEGREE, Green-cap Blade 2.0mm diameter  for cutting thick material, Flock 8.5mm  thick (1 pc)

Model: RX, Jaguar 1-4, Puma 1-3, Bengal, Sable, Expert Series

GCC Video:  Use of cutting blades (By Color)

GCC 26500060G Blade, 50 DEGREE, GCB-500, For Cutting Small Letters( 1pc)

Model: RX, Jaguar 1-4, Puma 1-3, Bengal, Sable, Expert series

GCC Video:  Use of cutting blades (By Color)

GCC 26500059G Blade, 60 DEGREE, for standar sandblast GCB-460SO

Model: RX, Jaguar 1-4, Puma 1-3, Bengal, Sable, Expert series  

GCC Video:  Use of cutting blades (By Color)

Blades, GCC, 5 Pack, 25 Deg., 2.0mm Dia., Yellow Cap, Std Force for Gold Plate Holder
App\Models: Cutting Thin Materials or Window Ting,  \ RX/Jaguar IV/Puma III/Expert series

GCC Video:  Use of cutting blades (By Color)

Blades, GCC, 5 Pack, 45 Deg., 2.0mm Diam., Red Cap, Std Force for Gold Plate Holder

App\Model: For Cutting Vinyl & Thin Flock \ RX/Bengal/Sable/Jaguar IV/Puma 1-3/Expert Series

GCC Video:  Use of cutting blades (By Color)

GCC 202003480G Blade, 45 DEGREE, Red cap For Cutting Vinyl & Thin Flock 

For cutting thick fluorescent and window tint film. Also for cutting detailed work in standard vinil

5-Unit package /  0.25 mm blade offset / 2.5mm blade diameter

Models: i-Craft 2.0/ AR-24/ Expert II /Puma IV

GCC Video:  Use of cutting blades (By Color)

Blades, Roland, 1 Pcs, 45 Dg.\.25 Offset Blade For All Purpose (Roland CAMM-1-All cutters)

This 45° blade is used for cutting standard thickness materials. It is excellent for general purpose cutting of 2-3 mil adhesive backed substrates. The Roland part number USA-C145-1 is compatible with all Roland vinyl cutters and printer/cutters. This item contains 1 vinyl cutter blade.

Blades, Roland, 1 Pcs, 60 Dg.\.10 Offset Blade For Thick Materials (Roland CAMM-1-All Cutters)

This 60° blade is used for cutting thick materials. It is excellent for general purpose cutting of 4 mil and greater adhesive backed substrates. The Roland part number USA-C160-1 is compatible with all Roland vinyl cutters and printer/cutters. This item contains 1 vinyl cutter blade.

Blades, Roland, 3 Pack, 45 Dg.\.25 Offset Blade For All Purpose (Roland CAMM-1-All cutters)

This 45° blade is used for cutting standard thickness materials. It is excellent for general purpose cutting of 2-3 mil adhesive backed substrates. Compatible with all Roland vinyl cutters and printer/cutters. This pack contains 3 vinyl cutter blades

Blades, Roland, 3 Pack, 60 Dg.\.10 Offset Blade For Thick Materials (Roland CAMM-1-All Cutters)

This 60° blade is used for cutting thick materials. It is excellent for general purpose cutting of 4 mil and greater adhesive backed substrates. The Roland part number USA-C160-3 is compatible with all Roland vinyl cutters and printer/cutters. This item contains 3 vinyl cutter blades.

RVZEC-U5032 Blades, Roland, 45 Degree/.25 Offset Premium Blade, 2pk - Standard Materials

RVZEC-U1005 Blades, Roland, 45 Degree/.25 Offset Premium Blade, 5 ea. - All Purpose

RVZEC-U5025 Blades, Roland, 45 Degree/.25 Offset Premium Blade, 5 ea. - Standard Materials

Blades, Roland, 5 Pack, 25 Dg.\.125 Offset Blade For Thin Materials (Roland CAMM-1-All Cutters)

This 25° blade is used when cutting very thin materials. It is excellent for cutting t-shirt transfer materials and polyester films like window tint. The Roland part number USA-C125-5 is compatible with all Roland vinyl cutters and printer/cutters. This item is a pack of 5 vinyl cutter blades.

Blades, Roland, 5 Pack, 45 Dg.\.25 Offset Blade For All Purpose (Roland CAMM-1-All cutters)

This 45° blade is used for cutting standard thickness materials. It is excellent for general purpose cutting of 2-3 mil adhesive backed substrates. Compatible with all Roland vinyl cutters and printer/cutters. This pack contains 5 vinyl cutter blades

RVZEC-U5010 Blades, Roland, 55 Degree/.5 Offset Blade, 2 ea. - Window Tint

RVZEC-U3050 Blades, Roland, 60 Degree/.50 Offset Premium Blade, 5 ea. - Sandblast

RVZEC-U3100 Blades, Roland, 60 Degree/1.00 Offset Premium Blade, 5 ea. - Thick Materials

RVXD-CH4-OR Blades, Roland, Blade Holder, Adjustable Tip, Alloy, Orange

RVXD-CH4-RD Blades, Roland, Blade Holder, Adjustable Tip, Alloy, Red

Blade Holder, Adjustable Tip, Regular 
XD-CH3 (Ceramic, Standard)

Flat Cable Assembly.(104CM) for GCC Expert 24

Cable, Flat Cable, 16-pin, 1010mm, Puma II 30 & 60/Bobcat/Bengal (PC00123) 

Carriage Assembly without PCB for GCC Expert 24

Carriage Assembly without PCB(EX-24 LX) for GCC Expert 24

Control Panel Assembly, Expert-24

Control Panel Base (Puma) (PLC2020E)

Panel, Control Panel Board Assembly (LMC-STC2A20DRG-011)
For: Jaguar II,III,IV/Pume II, III/VOGUE/Expert Pro

Control Panel Sticker Expert-24

Cover, Tool Carriage Cover, Expert 24, Exp24LX, Exp52, Exp-52LX, Sable

GCC 290071580G Cut-off Blade Assembly (5pcs) for RX

EXPERT II-24

Cutting Plotter, GCC Expert II, 24", One-year Limited Manufacturer's Parts

Expert II Series is the best choice for beginners and provides sign makers with optimum speed, superior quality, solid reliability and unmatched value. Expert II produces eye-catching graphics with up to 27.8 ips (25 ips for EX-52 models ) cutting speed, 350g of cutting force and three meters (9.84 feet) of tracking ability. The versatile Expert II Series sets a new benchmark for value, offering high accuracy and reliability at an unbelievably affordable price.

For detailed information please visit: GCC World

• Digital servo motor drive up to 24 inches per second
• Up to 400 grams cutting force
• Tri-port connectivity provides you with greater flexibility
• Provide superior tracking capability
• Accu-Aligning System for contour cu

• Digital servo motor drive up to 24 inches per second
• Up to 400 grams cutting force
• Tri-port connectivity provides you with greater flexibility
• Provide superior tracking capability
• Accu-Alignin

TWO YEARS PARTS WARRANTY (112600060G)

1530mm/sec.(60) ips Cutting Speed

600g Cutting Force

GCC RX II-132S, 52 inch

The brand new RX II series of cutting plotters is available in four sizes, 61cm, 101cm, 132cm, and 183cm. Designed With a stylish appearance and new functional features, the RX II series is the top-notch cutter in the market for professional sign makers.

For detailed information please visit: GCC World

Two Years Parts warranty (112600010G) 

1530 mm/sec. (60 ips) Cutting Speed

600g Cutting Force

RX 11-61 24 inches wide cutting width

The brand new RX II series of cutting plotters is available in four sizes, 61cm, 101cm, 132cm, and 183cm. Designed With a stylish appearance and new functional features, the RX II series is the top-notch cutter in the market for professional sign makers.

For detailed information please visit: GCC World

TWO YEARS PARTS WARRANTY (112600020G)

1530MM/SEC. (60) IPS CUTTING SPEED

600 g Cutting Force  

RX II-101S, 40 inch

The brand new RX II series of cutting plotters is available in four sizes, 61cm, 101cm, 132cm, and 183cm. Designed With a stylish appearance and new functional features, the RX II series is the top-notch cutter in the market for professional sign makers.

For detailed information please visit: GCC World

Cutting Plotter, GCC RX II-183S 72" 
Two year PARTS warranty (112600030G)
1530 mm/sec (60 ips) cutting speed, 600g cutting force
Includes: Media Basket (29003504G) & Stand (29006162G)

The brand new RX II series of cutting plotters is available in four sizes, 61cm, 101cm, 132cm, and 183cm. Designed With a stylish appearance and new functional features, the RX II series is the top notch cutter in the market for professional sign makers. 

For detailed information please visit: GCC World

Expert 24 MainBoard with Expert 24 Firmware (from SNM 71338) for GCC Expert 24

Expert DU Roller (For service) for GCC Expert 24