Cermark Metal Marking Material

Screw, Thumb Plastic Screw for Carriage\Lens Assy (Cover, Optics)

RR31049175AS Screw, wire pin locking screw (M4*20 NI) EGX350

Roland Notes: This machine has been discontinued

Screw, Z Axis Table LeadScrews, Each (Spirit GX/Mercury/X252/X380)

Stopper, Adjust Nose EGX-350, DE3
Substitude Allen Screw, M3-.5-8

Original part RR1000003307 Discontinued as of 09/2022

Sensor, AAS II Sensor Assembly w/Bracket for Puma III

Sensor, PCB Board, X-axis Motor,  For Spirit GE/Spirit Si before K50319, Spirit LS BEFORE K50114 (MCB-5206 Parallel, Braided AF Cable, PCB-Marking 23800142G)
* Note: MCB-5206 will have a Parallel Connection Input

Sensor, PCB Board, X-axis Motor, For C180-I (4-Amp, MCB-5206, Replaces 29004513G & 23800235G)

Sensor, PCB Board, X-axis Motor, For C180-II (4-Amp, MCB-5206E, Replaces 290077850G & 238003710G)

Sensor, PCB Board, X-axis Motor, For Explorer, Braided Cable,  Rev. 2

Sensor, PCB Board, X-axis Motor, For Spirit Si\SGE\LS\GLS (4-Amp, MCB-5206, Replaces 29005107G & 29002511G, 23800226G Rev. 2-2017), Flat Ribbon Cable, AAS I
* Note: MCB-5206 will have a Parallel Connection Input

29004086G  Sensor, PCB Board, X-axis Motor, For: Gaia\X500          

Sensor, PCB, Rotary Attachment Sensor PCB

For GCC LaserPro X-Series Models X380, X252, MG-X380HYB

For GCC LaserPro X500 Series

GCC 24100253G Shift-Lever Cam (Black) , Jaguar 

Side Support Left(Black) for GCC Expert 24

Side Support Right(Black) for GCC Expert 24

Slide Bracket for simple stand (CS only) Expert 24

Spark Notes: 100mm In-Line Compact
Machine Model: Analog Series

Export Notes:  HTS Code #:  8421.39.8015, Made in the UK-England
Freight Class: 125, NMFC# 069100-03

Serie of baffles in the box… Air slows down inside the box as the cross-sectional duct area is increased to allow for larger particulate in the air stream to drop out. Air in the duct also turns through the baffles several times, this allows the largest particulate (those capable of carrying thermal energy) to transfer their energy to the cooler baffles and turn off

Spark Notes: In-Line Cabinet
Machine Model: For Digital Series (200i, 300i, 400i, 400i-PVC, 800i)
Export Notes:  HTS Code #:  8421.39.8015, Made in the UK-England
Freight Class: 125, NMFC# 069100-03

Spindle, Roland EGX20, 1/8" Assy. (90 Day Warranty)

Spindle, Roland EGX30\EGX30a (CS20) 1/8" Assy.

Spindle, Roland EGX350, 1164" Assy. with Belt 
Note: After you replace the spindle, you need to run it without any load with no tool or Collet installed for approximately 20 minutes. (90 Day Warranty)

Spindle, Roland EGX400/600, 1164" Assy. w/o Collet or Micrometer (90 Day Warranty)

Note: After you replace the spindle, you need to run it without any load with no tool or collet installed for approximately 20 minutes at 15000-RPM

Sprinkler, Flame Sprinkler System for: Spirit  Si, SLS, SGLSHYB, Mercury (MSRP $714)
Laser cutting and engraving operations using the flame sprinkler system protects the operator, machine, and the work products from potential fire hazards. During the engraving process, flaming may occur when working with combustible or easily-flammable materials, such as paper or wood. The flame sprinkler system is an optional item that automatically ejects gas to extinguish flames when they reach 68°C/155°F moments after the onset of the fire.

Response element and temperature: Fusible alloy@68°C (155°F)
Working pressure range: 0.1-1.2Mpa
Bulked coupling: 1/2” PT
Recommended Gas: CO2/N2/Dry Powder

• One (1) year Limit Manufacturer's Warranty
• 90 days for Optics
• Bundle G-Mark Advance Software

• Includes: One (1) year Limit Manufacturer's Warranty
• 90 days for Optics
• Bundle G-Mark Advance Software

Sticker, Control Panel Sticker, (Spirit Models, Venus II, Mercury III, X380, X252)

Sticker, GCC LaserProi.com Logo (17"x4", Front of Laser Door, Rev. 1)

26500112G Pad, Cutting Pad, White, W 6mm, L 10m (for all cutters except i-Craft/AR-24)

All GCC Cutters excluding iCraft/AR24)

GCC 241006690G Switch Cam, Puma IV (black)

GCC 24100258G Switch Cam, Puma-Puma I, II, III

Switch, Cable-Assy, Cover SW1 EGX360

Switch, Cable-Assy, Cover SW2 EGX360

Switch, DE3 Top Cover Limit Switch 1000022198

Switch, Emergency Stop for EGX-350/EGX-300

Switch, Emergency Switch (ALL GCC Models)

Switch, Laser On\Off Rotating Safety Key Switch (All GCC Machines)

Switch, Limit Lever for Z-axis Table

Switch, Limit Lever for Z-axis Table (C180, Spirit Si, Explorer I & II)

Switch, Limit Lever, Z Axis Down, All LaserPro Machines (SW00010A)

For: Spirit\Mercury\Venus II\X252\X380\MG380HYB

For Models: Mercury/Explorer/Venus/Spirit Si\SGE\SGX\SLS\SGLS\C180)

For: Cutters/Laser excluding AR 24 & iCRAFT

Kit Notes: Remote on/off Switch w/ Filter Block Indicator

Export Notes: HTS Code #: 8421392090, Made in the UK-England

*Interfacing Cables Brochure *

Switch, Z-Axis Cover, Z-axis Limit & X-axis Limit, Cable Assembly Sensor, EGX400\600

Table, EGX30A & EGX30, Surface Table Flat

Table, Surface Table for: DE-3, EGX-350

1000020471 TABLE,SV DE-3
TABLE,EGX-350 REPLACES: 1000003339

This T-Slot Table (Product # ZTT-35) is an optional accessory for use with third party vises and fixture. This table is compatible with the EGX-350 an DE3

Table, Vacuum Table (Product # ZV-23A) is an optional accessory for use with the Chip Extraction System (Product #US-CHIPSYS-C). This table is used as an alternative to adhesive sheets for holding down flat plastic material and is compatible with the EGX-350 engraver

Instructions

For testing of e-commerce only. Item not for sale.

Tray, Water Tray Cleaner Box for Roland EGX360

Tube, Laser Tube, 100w Laser Glass Tube Yongli 100w Y-Type for GCC Laser Model: X380
* w/1-Year Parts Limited Warranty  (Up to 50% Power)

Pallet DIM's: 35-Lbs\\66"Lx17"Wx26"H
EST Freight Cost $475-$575

Tube, Laser Tube, 80w Glass Tube R-Type for GCC Laser Model: X252 
* w/1-Year Parts Limited Warranty  (Up to 50% Power)

Tubing, Air Assist Plastic Air Hose
For All GCC Laser Engraving Machines (50"+ \ 1250mm)

Vacuum Adapter For Roland EGX400\600, ZAD-600
This Vacuum Adapter (Product #ZAD-600) is to connect the machine to the hose of the vacuum. This item is included in the Chip Extraction System (US-CHIPSYS-C). This adapter is for use with the EGX-400/600 engravers.

This Vacuum Hose (Product #12159209) is the standard replacement for the vacuum hose for the EGX-30. The vacuum hose should be replaced when damaged, punctured or when air is not being moved well.

VersaStudio BN-20 Desktop Inkjet Printer/Cutter

Start building a t-shirt, poster, sticker, and decal graphics printing business, all from the comfort of your desktop. With the VersaSTUDIO BN-20, you can print, cut, and create high-quality graphics without the high price tag.

• Easily the most versatile print device in its class— print and cut on a huge range of vinyl, films, and media
• In addition to traditional graphics, you can create heat transfer graphics for jerseys, hoodies, bags and more
• Legendary Roland DG machine reliability combines with exceptional image and color quality to give you the solution you need to succeed

Video's-  

BN-20 Sheet Feeding Calibration 

BN-20 Loading Media

BN-20 Daily Maintenance

BN-20 Parts and Accessories

BN-20 Print and Cut Adjustments

BN-20 Nozzil Test Print

TAX- Sales Tax will be collected on a separate invoice for the states listed below unless a Sales Tax Reseller Certificate is presented.  Taxable states are: CA, CO, FL, GA, IL, MA, MI, MN, NC, NJ, NY, PA, SC, TX, WA, WI. 

Vise, Fixture Kit (Vise, Pin Jig, Pen Fixture, Ruler Bar Fixture, 2 Medallion/Seal Fixtures) For: EGX-300/350/360/400/600

Vise, Machine Center Vise (PNC-2300/EGX-300/EGX-350)

GCC 241006540G Wheel for AR-24 Pinch Roller

Wheel, Caster 2.5" PU Stand Roller Wheel, Spirit Machines (#56)

Wheel, Caster 2.5" PU Stand Roller Wheel with Brake for Spirit Machines (#57)

Wheel, Half DU Roller Assembly (Gaia, X500-I)

Wheel, Pinch Roller Wheel, All GCC Cutters

Wheel, X axis Mid Belt Transmit Belt Wheel P40 (Page 38, #23, 1.19"W x 0.79H) Spirit GLS

Wheel, X-axis Mid Belt Wheel P48 (Page 38, #13,), Spirit GLS

Window Cylinders-Each, Top Door Spirit GLS, SGX, X380, MG380 Shock Lift (15.5" L, 7Kg)

Window Cylinders-Each, Top Door C180 Shock Lift (ea)

Window Cylinders-Each, Top Door For: X500II-RX/X500III

Wire, X-Axis CS-20 EGX30 (ea, 1 on Machine)

Wire, X-axis EGX350 1000003234

Roland Notes: This machine has been discontinued

Wire, X-Axis PNC2300A\EGX300