Rotary Accessories

Pre filter cyclone for dust collectors

Acts as a dust separator and pre filter cyclone that pushes debris and dust to the bottom container

Features:

• Easily Integrates Into Any Dust Collection System
• 5 Gallon Removable Debris Capture Bucket
• Highly Durable Molded Resin Design
• Scientifically Tested and Proven to Separate Dust
  • A 3M/Georgia Tech Study
• Up To 97% Cyclonic Separation Rate of Particles Down to .3 Microns
• 95% Effective at Precious Metal Reclamation
• Inlet/Outlet Ports – OD: 4″- ID: 3.75″

Bag, Vacuum Filter Bag (3-pk) for Chip Removal System
Filter bag (3-pk) for chip removal system
PRODUCT NUMBER: US-FLTRBAG-A3
This product #US-LN10 is a set of 3 replacement filter bags for the Chip Extraction System (Product #US-CHIPSYS-C). The Chip Extraction System is used with EGX-20/30/30A, EGC-350/360, EGX-400/600 and DE-3 engravers.

Bag, Vacuum Filter Bag (5-pk) for Chip Removal System
Filter bag (5-pk) for chip removal system
PRODUCT NUMBER: US-FLTRBAG-A5
This product #US-LN10 is a set of 5 replacement filter bags for the Chip Extraction System (Product #US-CHIPSYS-C). The Chip Extraction System is used with EGX-20/30A, EGC-350/360 and EGX-400/600 engravers.

Bag, Vacuum Filter Single Bag (1-pc) for Chip Removal System
Filter bag (1-pc) for chip removal system
This product single replacement filter bag for the Chip Extraction System (Product #US-CHIPSYS-C). The Chip Extraction System is used with EGX-20/30A, EGC-350/360 and EGX-400/600 engravers.

Bearing Kit, Six (6) Bearings for Meistergram\H2 Machines (4 End Carriage-X & Y-axis & 2-Z-Axiz, Savings of 25%+ with Kit) MSRP $108

Bearing, End Carriage, X & Y-axis, Ball-Radial, Flush, .875"OD, .312"ID, .343" THK Each (All Meistergram \ HSquare Machines)

Bearing, Z-Axis-Bottom Leadscrew, Ball, .250ID, .625OD, .69 Flange Each (All Meistergram \ HSquare Machines) Sold as Kit of 2 for $48.00

Belt, Drive, Timing, 40 DP 230 Tooth, .250 WD (DM2818C)

Belt, Meistergram\HSquare Spindle, 18.75" LG, 1/8" Dia. (1612, 2412, 2818-2 Belt System)
Buy Qty of 2 for $35

Belt, Meistergram\HSquare Spindle, 23" LG, 1/8" Dia. (912, PA912, 1912, 2818 Stepper)

Buy Qty of 2 for $35

Belt, Meistergram\HSquare Spindle, 5.75" LG, (2818-2 Belt System)

Brushes, Motor, Roland Vacuum Chip Removal System

Collet, 1/4"(6.35mm) for: Roland DGA EGX350/EGX400/EGX600, MDX-40, SRM-10, JXW-10
This 6.35mm Collet (Product #ZC-23-635) is for use with bottom loading end mills. It is compatible with the following Roland DGA devices: JWX-10, EGX-300/400/600, MDX-40, and SRM-10.

Collet, 1/8", ZC-23-3 Solid Split Bottom Load Collet 3mm (.125") For: DE-3, EGX300/EGX350/EGX400/EGX600

This 3mm Collet (Product #ZC-23-3) is for use with bottom loading end mills. It is compatible with the following Roland devices: JWX-10, EGX-300/400/600, MDX-40, and SRM-10.

Collet, Split, Top Load Collet 3.175mm PNC2300A (1,8") For: EGX300/ EGX350/EGX360

This 3.175mm Collet (Product #ZC-23-3175) is for use with bottom loading end mills. It is compatible with the following Roland devices: JWX-10, EGX-300/400/600, MDX-40, and SRM-10.

Collet, 11/64", Solid Bottom Load Collet 4.36 MM (.171") 

For: DE3/EGX350/EGX400/EGX600, Half Round Cutters

This Collet Holder (Product #1000003391, alternative to discontinued # 21655242) is used with standard cutting tools in the EGX-350. It should not be used with pass-through collets. This holder prevents the cutting tool from dropping through the spindle and damaging the engraving material.

Collet, 11/64", ZC-E436 Solid Bottom Load Collet (.171") For EGX300\EGX350\PNC-2300A\EGX400\600, Burnishing - Diamond Guide

This Bottom Loading Burnished Guide (Product #ZC-E436) is intended for use with the Roland EGX-Series engravers. The guide is designed for diamond drag applications and must be used with diamond engraving burnishing tools.

Collet, 6mm for EGX-300/EGX350/EGX400/EGX600600, JWX-10, MDX-40

This 6mm Collet (Product #ZC-23-6) is for use with bottom loading end mills. It is compatible with the following Roland devices: JWX-10, EGX-300/400/600, MDX-40, and SRM-10.

Coupler, Steel, X & Y-Axis, 2412S, .312 ID, .25 ID, .75 OD, 1.0 in LG

Coupler, Steel, Z-Axis, 2412S, .312 ID, .25 ID, .75 OD, .90 LG

(HS-171-005K High Speed Steel Metal)

Without Knob (Roland C2-171-010K)

Rotary Tools – Cutters Brochure Specs

Without Knob (Roland C2-171-015K)

Without Knob (Roland C2-171-020K)

Rotary Tools – Cutters Brochure Specs

Cutter, ADA Braille Cut-Out 1/64 Dia. x 6.5 inches

Cutter, Parallel, .060 Tip, 11/64" Dia. x 6.5" LG, PAR-171-060K

Diamond, 1/8" Dia. x 5" LG, 120DG w/o Brass Knob for Roland Engravers (Std Marking, Replaces: C2-125-DGK - ZDC-A2000)

Rotary Tools – Cutters Brochure Specs

Diamond, 1/8" Dia. x 5" LG, 90DG w/o Knob (Epoxy Pens) for Roland Engravers

Rotary Tools – Cutters Brochure Specs

Front Panel, Board, DM/SM Controller

This Hi-Speed Steel Cutter is a standard cutting tool intended for use with standard engraving plastic and engraving stock. It is compatible with EGX-350/360, and EGX-400/600 engravers.

(Roland Product #ZEC-J4012-7, Jorlink's #: CH1715.005)

Jig, Multipurpose Vise For EGX-300/350/360/400/600